Shop Manual & ETM BCM KIA Cerato 2010 - Head lamp leveling Device

Tài liệu Shop Manual & ETM BCM KIA Cerato 2010

2010 > G 1.6 DOHC > Body Electrical System

Circuit Diagram

Language

1 Install the head lamp leveling actuator by turning the adjusting gear

2 Install the head lamp assembly

3 Adjust the head lamp in accordance with the head lamp aiming instructions

2010 > G 1.6 DOHC > Body Electrical System

Inspection

1 Disconnect the negative (-) battery terminal

2 Remove the lower side crash pad switch (A) from the side crash pad cover by using the trim removal tool

(Refer to the Body group - "Crash pad")

[LHD]

Language

3 Remove the head lamp leveling switch connector from the lower crash pad switch.

[LHD]

4 Connect the battery voltage between terminals 5 and 4.

5 Measure the voltage between terminals 4 and 1 at each position

Position No Rotation Voltage (V) (±5%)