Tài liệu Shop Manual & ETM BCM KIA Cerato 2010
Trang 11 Power door mirror 2 Power door mirror switch
2010 > G 1.6 DOHC > Body Electrical System
Components
Language
Trang 22010 > G 1.6 DOHC > Body Electrical System
Inspection
1 Disconnect the negative (-) battery terminal
2 Remove the front door trim and power window switch module (Refer to the Body group-front door)
[LHD]
Language
Trang 33 Check for the continuity between terminals of power door mirror switch according to the table.
4 Check for continuity between the terminals in each switch position according to the table
Trang 42010 > G 1.6 DOHC > Body Electrical System
Inspection
1 Disconnect the power door mirror connector (A) from the harness
2 Apply battery voltage to each terminal as shown in the table and verify that the mirror operates properly
1 Up / Down
2 Left / Right
4 Lamp +
7 Heater +
8 GND
Language