Microsoft Word C045026e doc ICS 17 140 20; 53 100 Ref No ISO 6394 2008/Cor 1 2009(E) © ISO 2009 – All rights reserved Published in Switzerland INTERNATIONAL STANDARD ISO 6394 2008 TECHNICAL CORRIGENDU[.]
Trang 1ICS 17.140.20; 53.100 Ref No ISO 6394:2008/Cor.1:2009(E)
© ISO 2009 – All rights reserved
Published in Switzerland
INTERNATIONAL STANDARD ISO 6394:2008
TECHNICAL CORRIGENDUM 1 Published 2009-05-15
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION • МЕЖДУНАРОДНАЯ ОРГАНИЗАЦИЯ ПО СТАНДАРТИЗАЦИИ • ORGANISATION INTERNATIONALE DE NORMALISATION
Earth-moving machinery — Determination of emission sound pressure level at operator’s position — Stationary test
conditions
TECHNICAL CORRIGENDUM 1
Engins de terrassement — Détermination du niveau de pression acoustique d'émission au poste de
conduite — Conditions d'essai statique
RECTIFICATIF TECHNIQUE 1
Technical Corrigendum 1 to International Standard ISO 6394:2008 was prepared by Technical Committee
ISO/TC 127, Earth-moving machinery, Subcommittee SC 2, Safety, ergonomics and general requirements, in collaboration with ISO/TC 43, Acoustics, Subcommittee SC 1, Noise
Page 1, Clause 2
Date the reference to ISO 11201 so that it becomes “ISO 11201:—1)”
Delete the footnote to ISO 9249, whose third edition has since been published
Page 4, 8.1
Replace the first paragraph of the subclause with the following, reflecting a revision of accuracy grades as specified in ISO 11201 for the measurement of emission sound pressure levels:
“The time-averaged A-weighted emission sound pressure level at the operator's position shall be determined
in accordance with ISO 11201:—, accuracy grade 2.”
“1) To be published (Revision of ISO 11201:1995)”