9.5 Tract or, forward dir ction of mo ement o e head view of machine To identify the control that moves the tractor in the forward direction.. ISO 70 0-3 37 To identify the control for t
Trang 1Tractors, machinery for ag ricultur e
Part 2:
Tracteurs , matérie ls a ricole s et fre stiers, matérie l à moteur p ur
jardins et pe lo se s — S mb le s p ur le s comma de s de l’o érateur et
Trang 2COPYRIGHT PROTECTED DOCUMENT
© ISO 2016, P blshed in Sw itz rlan
A ll rig hts r eserved Unles otherw ise spe ified, nopar of this p blc tion ma y be r epr od c d or utilz d otherw ise in an form
or b an me ns, ele tr onic or me hanic l, inclu in p oto opying , or postin on the internet or an intranet , w ithout prior
written permis ion Permis ion c n be req esed from either ISO at the ad r es below or ISO’s member bod y in the c u try of
Trang 3F reword i v
1 Sc ope 1
2 Nor mati ve r eferenc es 1
3 Terms an definitions 1
4 General 2
5 Colour 3
6 Develo ment of new symb ls 3
7 Adaptation of symbols as dig ital display ic ons 4
8 General ag ricultural equipment symbols 4
9 A g r icultural tractor symbols 5
10 Har vestin machinery and eq ipment symbols 16
11 Combine har veste symb ls 24 12 Cot o harveste symb ls 30 13 F rag e har veste symbols 36 14 Sugar cane harvester symb ls 39 15 Windrowe symbols 46
16 A g r icultural sprayer symbols 47
17 Balng equipment symbols 53
18 A g r icultural implement symbols 57
Biblog raphy 59
Trang 4ISO (he Int ernational Org nization for Stan ardization) is a worldwidefede ation of national s an ards
b dies (ISO membe b dies) The work of pr p ring Int ernational Stan ards is normaly car ied out
through ISO t ech ical committ ees Each membe b dy int er st ed in a subje t for w hich a t ech ical
committ ee has be n es a lshed has the right t o be r pr sent ed on that committ ee Int ernational
org nizations, g ove nmental an non-g ove nmental, in laison with ISO, also take part in the work
ISO cola orat es closely with the Int ernational Ele trot ech ical C mmis ion (IEC) on al matt ers of
ele trot ech ical s an ardization
The proc d r s used t o develo this document an those int en ed for it furthe maint enanc ar
desc ibed in the ISO/IEC Dir ctives, Part 1 In p rticular the dife ent a pro al c it eria ne ded for the
dife ent ty es of ISO document should be not ed This document was draft ed in ac ordanc with the
edit orial rules of the ISO/IEC Dir ctives, Part 2 ( e www.iso.org dir ctives)
A tt ention is drawn t o the p s ibi ity that some of the element of this document ma be the subje t of
p t ent right ISO shal not be held r sponsible for identifying any or al such p t ent right Detais of
any p t ent right identified d ring the develo ment of the document wi be in the Introd ction an / r
on the ISO ls of p t ent de larations r c ived ( e www.iso.org p t ent )
Any trade name used in this document is information given for the convenienc of use s an does not
cons itut e an en orsement
F or an ex lanation on the meaning of ISO spe ific t erms an ex r s ions r lat ed t o conformity
as es ment, as wel as information a out ISO’ s adhe enc t o the WTO principles in the Te h ical
Bar ie s t o Trade (TBT) se the fol owing URL: F or word - Sup lementary information
The committ ee r sponsible for this document is ISO/TC 2 , Trac tors a d machiner y fr a ric ultur a d
fr s try, SC 14, Ope ator c ontrol s ,o e ator sy mb ls a d othe di s pla s , o e ator ma u ls
This fourth edition canc ls an r plac s the third edition (ISO 3 67-2:2 0 ), w hich has be n tech icaly
r vised Many new symb ls ha e be n ad ed
A l s of al the p rt in the ISO 3767 se iescan be foun on the ISO websit e
Trang 5Tractors, machinery for ag ricultur e and forestry, powered
This document s an ardiz s symb ls for use on o e at or controls and othe display s on a ricultural
tract ors an machine y
NOTE 1 ISO 37 67-1cover common symb ls that ap ly to multiple ty es of a ricultural tract or an machinery,
forestry machinery, an powered lawn an g rden eq ipment.ISO 37 67-3 cover symb ls for powered lawn an
g rden eq ipment ISO 37 67-4 cover symb ls for forestry machinery ISO 37 67-5 cover symb ls for man al
porta le forestry machines
NOTE 2 ISO 70 0 an IE 60417 can b consulted for ad itional internationaly stan ardized symb ls of
potential relevance to a ricultural tractor an machinery
The folowing document ar r fe r d t o in the t ext in such a wa that some or al of their cont ent
cons itut es r q ir ment of this document F or dat ed r fe enc s, only the edition cit ed a ples F or
un at ed r fe enc s, the lat es edition of the r fe enc d document ( inclu ing any amen ment ) a ples
ISO 37 67-1:2 1 , Trac tors, machine y fr a ric ultur a d fr s tr y, p we ed law n a d g rden eq ipment —
Sy mb ls fr o e ator c ontrol s a d othe di s plays—Part 1: Commo sy mb ls
IEC 8 41 -1, B as ic princ iples fr gra hic al sy mb ls fr us e o eq ipment — Part 1: Cr ation o gra hic al
sy mb l s fr r gi s tratio
ISO 8 41 - 2, B as ic princ iples fr gra hic al sy mb l s fr us e o eq ipment — Part 2 : Form a d us e o ar ows
IEC 8041 -3, B as ic princ iples fr gra hic al sy mb ls fr us e o eq ipment — Part 3 : Guidelnes fr the
a plc atio o gra hic al sy mb ls
3 Terms and definitions
F or the purposes of this document, the folowing t ermsand definitions a ply
ISO an IEC maintain t erminolo ical data ases for use in s an ardization at the folowing ad r s es:
— IECEle tro edia: a aia le at ht p:/ www.ele tro edia.org
— ISO Onlne brow sing plat orm:a ai a le at ht p:/ www.iso.org o p
Trang 6graphical symbol
visualy pe c ptible f igur used t o transmit information in epen ent of languag e
Not e 1 to entry: It may b prod ced by drawing, printing or other me ns Lett er , n merals an mathematical
symb ls may b used as symb ls or symb l elements For some specif ic ap lications, grou s of let er (for
e ample, A TO, STOP)are used as symb ls or symb l elements
Not e 2 t o entry: Let er an n merals are not re istered by ISO/T 145 SC 3 or p blished in ISO 70 0 u les they
are symb l elements emb d ed in grap ical symb ls
3.2
ico
digital display icon
digitiz d (pix elat ed) r pr sentation of a gra hical symb l, usual y used on a r con gura le ele tronic
displa sc e n or gra hical use int erfac (GUI)
Not e 1 to entry: A single symb l can b represented by multiple icons, e ch of a diferent size, pix el cou t or
colourization
4.1 Exc pt wher e in icated in subseq ent clauses, symb ls shal be used as shown in this document
4.2 S le ted symb ls, which ar e shown in ou ine form in this document , ma y be fi ed in actual use for
enhanc d clarity of r epr od ction an impr oved visual per ception b the o erator, exc pt as othe w ise
spe ified for individ al symb ls, an in ac or danc with IEC 8 416-3
4.3 Limitations in er ent in some r epr od ction and displa y te h olog ies can req ire increased lne
width or othe minor modifications of symb ls Such modifications are alowed, pr ovided that the symb l
remainsconc ptualy u chang ed in it b sic g raphical element an is easiy disc rnible b the o erator
4.4 To impr ove the a pearanc an per ceptibi ty of a g r aphical symb l, or to co rdinate w ith the
desig n of the eq ipment to which it is a pled, it can be ne es ary to modify the symb l as in icated
in IEC 8 41 -3 (or example, to chang e the lne width or to rou d the corne s of the symb l) Such
modifications ar e alowed, provided that the es ential per ceptible char acte is ics of the symb l are
maintained
4.5 For actual use, al symb ls shal be r epr od c d lar g e enough to be easiy disc rnible b the o erator
F low IEC 8041 -1 for the pr ope sizing of symb ls Symb ls g r ouped tog ethe in a displa y or on a set
of contr ols should be scaled to the same deg r ee relative to the corne mar ks of the symbol orig inal as
shown in this document in or de to maintain the corr ect visual relationship among the symb ls Symb ls
shal be used in the orientation shown in this document , u les r otation or mirr or imag ing is spe ificaly
alowed for in ividual symb ls
4.6 Mos symb ls ar e cons ructed using a buiding block a pr oach in which v rious symb ls an
symb l element ar e combined in a log ical man e to pr od c a new symb l
4.7 In some cases, symb ls ma y be used in conju ction, without being combined into a composite
symb l, to convey the same meaning as the comp site symb l
4.8 Symb ls are g eneraly inten ed to replac a wor d or wor ds w ith a g raphical imag e that has the
Trang 7an o er head view, a machine moving fr om b ttom to to acros the symb l ar ea shal be as umed.
4.10 Symb ls on contr ols an displa ys shal ha ve a g ood contr as to their b ckg r ou d A white or l
ght-coloured symb l on a black or dar k-colour ed b ckg rou d is pr efe red for mos contr ols Displa ys ma y
use eithe a white or lght-colour ed symb l on a black or dar k-colour ed b ckg r ou d or a black or dar
k-coloured symb l on a white or l ght-coloured b ckg r ou d, depending up n which alte native pr ovides
the bes visual per ception When a symb l imag e is r eve sed (or example, from black-on-white to
white-on-black or vic ve sa) this r eve sal shal be done for the entir e symb l
4.11 If symb ls ar e cast , moulded, emb s ed or s amped into a surfac , the symb ls shal be visualy
dis inct fr om that surfac without depen enc on colour
4.12 Symb ls shal be located on or adjac nt to the control or displa y that is being identified Wher e
more than one symb l is r eq ir ed for a contr ol, the symb ls shal be located in r elation to the contr ol
such that mo ement of the control towar ds the symb ls shal efe t thefu ction depicted b that ymb l
4.13 A rr ows used in symb ls shal conform to the r eq ir ements of ISO 8 41 -2 IEC 8 41 -1 shal be
consulted for the g eneral principles for creating symb l orig inals IEC 8 41 -3 should be consulted for
g uidelnes for the a plcation of symb ls
4.14 ISO/IEC r eg is ration n mbe s ar e show n for symb ls which ar e reg is er ed in ISO 7 0 or
IEC 6 417
NOTE Symb l originals are ap roved an re istered either by ISO/T 145 SC 3 an p blished in ISO 70 0
or by IE / C 3C an p blished in IE 60417 In some cases, modif ied or ap lication symb ls, rather than the
re ist ered symb l originals, are stan ardized in this document
4.15 When lette s or n mer als ar e used in a symb l, the font shown shal not be consider ed definitive
Othe font ma y be used so long as the lette s and n merals r emain leg ible
4.16 Symb ls in this document ar e shown w ithin mar ks that delmit the corne s of the 7 mm sq ar e
b sic p te n fr om IEC 8 41 -1 C rne mar ks ar e not p rt of the symb l, but are provided to ensur e
consis ent pr esentation of al symb l g r aphics
When used on i uminat ed display s, the fol owing colours shal ha e the meanings in icat ed:
— r d denot es a faiur , se ious malfunction or o e ating condition that r q ir s immediat e att ention;
— yelow or ambe denot es a con ition out ide normal o e ating l mit ;
— gr en denot es a normal o e ating con ition
6.1 Prior to develo ing a new symb l, a sear ch should be con ucted for previously s an ardiz d
symb ls w ith the same or simiar meaning to what is ne ded ISO 7 0 an IEC 6 41 (b th a vaia le
in data ase form) are compiations of inte nationaly s an ardiz d symb lswhich can be useful b th for
fin ing a pr opriate symb ls that do not a pear in ISO 3 6 an for g enerating conc pts that can be used
in the develo ment of new symb ls
Trang 8ac ordanc with ISO 8 416-2 Difer ent arr ow forms ha ve difer ent meaning s ac ording to ISO 8041
-2 C r e should be taken to use the corr ect arr ow form F lowing the g uidelnes of ISO 3 67-1:2 1 ,
A nnex A makes pos ible the develo ment of symb ls a pr opriate in g r aphical form an content for
inte national s an ar dization an ISO 7 0 reg istration
6.3 Symb ls pr op sed for stan ar dization in this document shal inclu e a short ex planation of the
fu ction or ex pe ted use of the symb l
NOTE IE 8 416-1 uses the term “des ription” for this ty e of information an provides guidelines for
writing des riptions for symb ls inten ed for stan ardization in ISO 70 0 or IE 60417 T e des riptions for
symb ls stan ardized in this document can serve as e amples
7 Adaptation of symbols as dig ital display icons
Symb ls can be ada t ed for use as digital displa icons on visual displa unit , r con gura le display s
or othe ele tronic display s Such ada tations should folow the principles of ISO 8041 -4 Spe ial car
should be taken t o ensur that digital displa icons pr se ve the visual impr s ion of the symb l from
w hich the icon is ada t ed The same principles r g rding use of colour with symb ls a ply t o the use of
colour with digital displa icons
8 General ag ricultural equipment symbols
To in icate the are that has b en worked by a
machine per hour of operation
ISO 70 0-165
To in icate the distance that has b en traveled by a
machine d ring work
ISO 70 0-2 7
To in icate the ap lication rat e (for e ample,of se ds
or fertilizer) per are
ISO 70 0-3 8
Trang 98.5 Machine immo i iz r
Toidentify the control that immo ilizes the machine
to prevent its u inten ed or u authorized movement
Toin icate that the machine is in the immo ilized
con ition
ISO 70 0-3 37
Toin icate the t otal are that has b en work ed by the
machine in the given time period
ISO 70 0-3 3
Toin icate the are that remains t o b worked by a
machine T e total are to b worked is specif ied an
the actual are worked is subtract ed t o determine the
are remaining
ISO 70 0-3 4
9 A g ricultural tractor symbols
ISO/IE
r gis ration n mbe
Toidentify the tract or from a side (prof ile) view
Use as a b se symb lfor developing tractor symb ls
that use a side (prof ile) view
ISO 70 0-2 3
Toidentify the tract or from an overhe d (plan)view
T is symb l is viewed from the per pective of a
per on lo king at he tractor from a ove the machine
Use as a b se symb lfor developing tractor symb ls
that use an overhe d (plan) view
Trang 109.5 Tract or, forward dir ction of mo ement
(o e head view of machine)
To identify the control that moves the tractor in the
forward direction
To in icate that he tractor is moving forward
T is symb l is viewed from the per pective of a
per on lo king at he tract or from a ove the machine
To in icate that the tractor is moving re rward
T is symb l is viewed from the per pective of a
per on lo king at he tract or from a ove the machine
ISO 70 0-2 36
To identify the display that shows the grou d spe d
of the tractor
To in icate the grou d spe d of the tractor
ISO 70 0-2 79
To identify the control that activates the automatic
mode for tractor grou d spe d
To in icate that tractor grou d spe d is in the
aut omatic control mode
ISO 70 0-3 3
To identify the control that sets the targ t grou d
spe d of the tractor
To in icate the tract or targ t grou d spe d
ISO 70 0-3 3
To identify the control for the tract or front w he l drive
To in icate that the tractor front whe l drive is in
normal operation mode
ISO 70 0-16 3
To identify the control that switches of the tract or
front whe l drive
To in icate that the tractor front whe l drive is
switched of or is otherwise not availa le
Ne ation of
ISO 70 0-16 3
To identify the control for the automatic operation of
the tractor front whe l drive
To in icate that the tractor front whe l drive is in
ISO 70 0-242
Trang 119.1 Tract or, front w he l drive, braking
Toidentify the control for the tractor front whe l
drive brake
Toin icate the status of the tractor front whe l drive
brake sy stem
Front whe l drive eng g s when brakes are ap lied at
travel spe ds a ove a specif ied limit
ISO 70 0-242
Toin icate the de re of whe l slip, which is the
diference b tween the actual grou d spe d of the
tract or an the grou d spe d implied by the
rotational spe d of the drive whe ls
Toidentify the control that sets or adjusts the de re
of whe l slip at which an in ication is provided or
action is taken, either man al y or automatical y
ISO 70 0-16 5
Toidentify the control for the automatic operation of
the tract or whe l slip sy stem
Toin icate that the tract or whe l slip sy stem is in
aut omatic operation mode
ISO 70 0-3 3
To identif y the control for a pro rammed seq ence
of tractor operations taken at he en of a field
(he dlan )
Toin icate the operational status of the tract or
he dlan turning sy st em
T is symb l is viewed from the per pective of a
per on lo king at he tractor from a ove the machine
ISO 70 0-2 0
Toidentify the control for the auxiliary he dlights of
the tract or
ISO 70 0-2 37
Toidentify the control for the tractor suspension
system
Toin icate the operational status of the tract or
suspension syst em
ISO 70 0-3 34
Toidentify the control for the tractor front
suspension syst em
Toin icate the operational status of the tract or front
suspension syst em
ISO 70 0-3 3
Trang 129.2 Tract or, suspension sy st em, r ar
To identify the control for the tract or re r
suspension system
To in icate the operational status of the tract or re r
suspension system
ISO 70 0-3 36
To identify the control for the tract or ride control
sy st em,which d namical y adjusts the suspension
sy st em to smo th the ride over u even grou d
To in icate the operational status of the tract or ride
control sy st em
ISO 70 0-3 37
To identify the control for the rockshaf of a
machine; the rockshaf raises or lower the
implement or eq ipment at ached t o it
To in icate the operational status of the rockshaf
ISO 70 0-2 3 (se 9.1) may b placed to the lef of
this symb l
T e horizontal grou d line may b deleted if in
cont ext the symb l me ning remains cle r
For front hitch (rockshaf t) use the mir or ima e
(se 9.3 )
ISO 70 0-1 6
To identify the control that raises the rockshaf
To in icate that the rockshaf is b ing raised or is in
the raised (up) position
ISO 70 0-2 3 (se 9.1) may b placed to the lef of
this symb l
T e horizontal grou d line may b deleted if in
cont ext the symb l me ning remains cle r
For front hitch (rockshaf t) use the mir or ima e
(se 9.3 )
ISO 70 0-1 6
To identify the control that lower the rockshaf
To in icate that the rockshaf is b ing lowered or is in
the lowered (down)position
ISO 70 0-2 3 (se 9.1) may b placed to the lef of
this symb l
T e horizontal grou d line may b deleted if in
cont ext the symb l me ning remains cle r
For front hitch use the mir or ima e (se 9.3 )
ISO 70 0-1 68
Trang 139.2 R ocksh f , flo t
Toidentify the control that al ows the rockshaf to
move u an down with the cont our of the grou d
over which or through which the implement or
eq ipment at ached to the rockshaf moves
Toin icate that the rockshaf is in the flo t con ition
ISO 70 0-2 3 (se 9.1) may b placed t o the lef of
Toidentify the control that sets the ma imum height
to which an implement can b raised by the rockshaf
Toin icate that the rockshaf is raised t o its
ma imum height
ISO 70 0-2 3 (se 9.1) may b placed t o the lef of
this symb l
T e horizontal grou d line may b delet ed if in
conte t he symb l me ning remains cle r
For front hitch (rockshaf t) use the mir or ima e
(se 9.34)
ISO 70 0-2 78
To identify the control that sets the minimum height t o
which an implement can b lowered by the rockshaf
Toin icate that the rockshaf is lowered t o its
minimum height
ISO 70 0-2 3 (se 9.1) may b placed t o the lef of
this symb l
T e horizontal grou d line may b delet ed if in
conte t he symb l me ning remains cle r
For front hitch (rockshaf t) use the mir or ima e
(se 9.3 )
ISO 70 0-3 8
Toidentify the control that sets the ma imum depth
t o which the rockshaf is alowed to move while the
implement or eq ipment is in operation
Toin icate the ma imum depth set ing of the
rockshaf depth control
ISO 70 0-2 3 (se 9.1) may b placed t o the lef of
this symb l
For front hitch (rockshaf t) use the mir or ima e
(se 9.36)
ISO 70 0-3 9
Trang 149.2 R ocksh f , depth control, minimum depth
To identify the control that sets the minimum depth
to which the rockshaf is alowed t o move while the
implement or eq ipment is in operation
To in icate the minimum depth set ing of the
rockshaf depth control
ISO 70 0-2 3 (se 9.1) may b placed to the lef of
this symb l
For front hitch (rockshaf t) use the mir or ima e
(se 9.37)
ISO 70 0-3 9
To identify the control for the rockshaf of a
machine; the rockshaf raises or lower the
implement or eq ipment at ached t o it
To in icate the operational status of the rockshaf
ISO 70 0-2 3 (se 9.1) may b placed to the right of
this symb l
T e horizontal grou d line may b deleted if in
cont ext the symb l me ning remains cle r
F or e r hit ch (rockshaf) use ISO 70 0-1 6 (se 9.2 )
Mir or ima e of
ISO 70 0-1 6
To identify the control that raises the front hitch
(rockshaf)
To in icate that the front hitch (rockshaf)is b ing
raised or is in the raised (up) position
ISO 70 0-2 3 (se 9.1) may b placed to the right of
this symb l
T e horizontal grou d line may b deleted if in
cont ext the symb l me ning remains cle r
F or re r hit ch (rockshaf) use ISO 70 0-1 6 (se 9.2 )
Mir or imag e of
ISO 70 0-1 6
To identify the control that lower the rockshaf
To in icate that the rockshaf is b ing lowered or is in
the lowered (down)position
ISO 70 0-2 3 (se 9.1) may b placed to the right of
this symb l
T e horizontal grou d line may b deleted if in
cont ext the symb l me ning remains cle r
F or re r hit ch (rockshaf) use
ISO 70 0-1 68 (se 9.24 )
Mir or ima e of
ISO 70 0-1 68
Trang 159.3 Front hit ch (rocksh f), flo t
Toidentify the control that al ows the front hitch
(rockshaf)to move u an down with the contour
of the grou d over which or through which the
implement or eq ipment at ached t o the rockshaf
moves
Toin icate that the front hit ch (rockshaf)is in the
flo t con ition
ISO 70 0-2 3 (se 9.1) may b placed t o the right of
this symb l
F or e r hitch (rockshaf)use ISO 70 0-16 0 (se 9.2 )
Mir or ima e of
ISO 70 0-16 0
Toidentify the control that sets the ma imum height
to which an implement can b raised by the front
hitch (rockshaf)
Toin icate that the front hit ch (rockshaf)is raised to
its ma imum height
ISO 70 0-2 3 (se 9.1) may b placed t o the right of
this symb l
T e horizontal grou d line may b delet ed if in
conte t he symb l me ning remains cle r
F or e r hit ch (rockshaf) use ISO 70 0- 2178 (se 9.26)
Mir or ima e of
ISO 70 0-2 78
Toidentify the control that sets the minimum height
to which an implement can b lowered by the front
hitch (rockshaf)
Toin icate that the front hit ch (rockshaf)is lowered
to its minimum height
ISO 70 0-2 3 (se 9.1) may b placed t o the right of
this symb l
T e horizontal grou d line may b delet ed if in
conte t he symb l me ning remains cle r
F or e r hitch (rockshaf)use ISO 70 0-3 8 (se 9.27)
Mir or ima e of
ISO 70 0-3 8
depth
Toidentify the control that sets the ma imum depth
to which the rockshaf is alowed to move while the
implement or eq ipment is in operation
Toin icate the ma imum depth set ing of the
rockshaf depth control
ISO 70 0-2 3 (se 9.1) may b placed t o the right of
this symb l
F or e r hitch (rockshaf)use ISO 70 0-3 9 (se 9.2 )
Mir or ima e of
ISO 70 0-3 9
Trang 169.3 Front hit ch (rocksh f), depth control, minimum
depth
To identify the control that sets the minimum depth t o
which the front hitch (rockshaf)is alowed to
move while the implement or eq ipment is in
operation
To in icate the minimum depth set ing of the front
hit ch (rockshaf) depth control
ISO 70 0-2 3 (se 9.1) may b placed to the right of
this symb l
F or re r hit ch (rockshaf) use ISO 70 0-3 9 (se 9.2 )
Mir or ima e of
ISO 70 0-3 9
To identify the control for the diferential lock, which
for es b th whe ls on an a le to rotate at he same
spe d re ardles of the traction availa le t o either
whe l in ivid al y while stil alowing the whe ls t o
rotate at diferent spe ds when ne otiating a turn
To in icate the operational status of the diferential
lock
ISO 70 0-16 2
To identify the control for the power take-of (P O)
sy st em
To in icate the operational status of the P O
Symb l may b used with a n merical in icat or of
rated P O rotational spe d S e 9.43, 9.4 an 9.45
ISO 70 0-1 72
clockwise
To in icate that the P O shaf rotates clockwise
For anticlockwise rotation use the mir or ima e
(se 9.4 1)
Direction of rotation is from the per pective of a
per on lo king at he en of the P O shaf
ISO 70 0-16 4
anti clockwise
To in icate that the P O shaf rotates anticlockwise
For clockwise rotation use ISO 70 0-16 4 (se 9.40)
Direction of rotation is from the per pective of a
per on lo king at he en of the P O shaf
Mir or ima e of
ISO 70 0-16 4
To identify the control that sets or adjusts the
rotational spe d of the P O shaf
To in icate the rotational spe d of the P O shaf
Symb l element “ n/min” may b replaced by a
n merical in icator of P O rated rotational spe d
S e 9.43, 9.4 an 9.45
ISO 70 0-3 94
Trang 179.4 Pow er tak e-of (P O), rated rotational spe d,
5 0 r min
Toidentify the control for the P O rated at 540 r/min
Toin icate the operational status of the P O rated at
To identify the control for the P O rat ed at 1 0 0 r/ min
Toin icate the operational status of the P O rated at
To identify the control for the P O rat ed at 2 0 0 r/ min
Toin icate the operational status of the P O rated at
2 0 0r/min
Ap lication of
ISO 70 0-3 94
To identif y the control that sets or adjusts the
clockwise rotational spe d of the power take-of
(P O) shaf t
To in icate the clockwise rotationalspe d of the
P O shaft
Symb l element “ n/min” may b replaced by a
n merical in icator of P O rated rotational spe d in
the clockwise direction S e 9.48, 9.5 an 9.5
Direction of rotation is from the per pective of a
per on lo king at he en of the P O shaf
ISO 70 0-343
spe d
Toidentify the control that sets or adjusts the
anti clockwise rotational spe d of the power take-of
(P O)shaf
Toin icate the anticlockwise rotational spe d of the
P O shaf
Symb l element “ n/min” may b replaced by a
n merical in icator of P O rated rotational spe d in
the anticlockwise direction S e 9.49, 9.5 an 9.5
Direction of rotation is from the per pective of a
per on lo king at he en of the P O shaf
ISO 70 0-343
spe d, 5 0 r/ min
Toidentify the control for the P O rated at 540 r/min
in the clockwise direction
To in icat e that the P O operat es in the clockwise
direction of rotation at a rotational spe d of 540 r/ min
Toin icate the operational status of the P O rated at
540 r/min in the clockwise direction
Direction of rotation is from the per pective of a
per on lo king at he en of the P O shaf
Ap lication of
ISO 70 0-343
Trang 189.4 Powe take-of (PTO), rat ed anti clockwise
rotational spe d, 5 0 r/ min
To identify the control for the P O rated at 540 r/min
in the anticlockwise direction
To in icat e that the P O operat es in the anticlockwise
direction of rotation at a rotational spe d of 540 r/ min
To in icate the operational status of the P O rat ed at
540 r/min in the anticlockwise direction
Direction of rotation is from the per pective of a
per on lo king at he en of the P O shaf
Ap lication of
ISO 70 0-343
spe d, 1 0 0 r/ min
To identify the control for the P O rated at
1 0 0r/min in the clockwise direction
To in icate that the P O operates in the clockwise
direction of rotation at a rotational spe d of
1 0 0r/min
To in icate the operational status of the P O rat ed at
1 0 0r/min in the clockwise direction
Direction of rotation is from the per pective of a
per on lo king at he en of the P O shaf
Ap lication of
ISO 70 0-343
rotational spe d, 1 0 0 r/ min
To identify the control for the P O rated at
1 0 0r/min in the anti clockwise direction
To in icate that the P O operates in the
anti clockwise direction of rotation at a rotational
spe d of 10 0 r/min
To in icate the operational status of the P O rat ed at
1 0 0r/min in the anti clockwise direction
Direction of rotation is from the per pective of a
per on lo king at he en of the P O shaf
Ap lication of
ISO 70 0-343
spe d, 2 0 0 r/ min
To identify the control for the P O rated at
2 0 0r/min in the clockwise direction
To in icate that the P O operates in the clockwise
direction of rotation at a rotational spe d of
2 0 0r/min
To in icate the operational status of the P O rat ed at
2 0 0r/min in the clockwise direction
Direction of rotation is from the per pective of a
per on lo king at he en of the P O shaf
Ap lication of
ISO 70 0-343
Trang 199.5 Power take-of (PTO), rat ed anti clockwise
rotational spe d, 2 0 0 r/ min
Toidentify the control for the P O rated at
2 0 0r/min in the anti clockwise direction
Toin icate that the P O operat es in the
anti clockwise direction of rotation at a rotational
spe d of 20 0 r/min
Toin icate the operational status of the P O rated at
2 0 0r/min in the anti clockwise direction
Direction of rotation is from the per pective of a
per on lo king at he en of the P O shaf
Ap lication of
ISO 70 0-343
Toin icate a failure or malfu ction of the power
take-of (P O)
ISO 70 0-1 72(se 9.3 )with the colour red is an
alt ernative t o this symb l
ISO 70 0-3434
Toidentify the control that sets the lo d (t orq e) of
the power take-of (P O)
Toin icate the lo d (t orq e)of the P O
Metric torq e u its (Nm)are shown; non-metric
torq e u its (lb-f)may b substituted
ISO 70 0-3 9
Toidentify the control for the front P O of the tractor
To in icate the operational status of the tractor
front P O
Symb l may b used with a n merical in icator of
rat ed P O rotational spe d
ISO 70 0-2 8
Toidentify the control for the re r P O of the tract or
To in icate the operational status of the tractor
re r PTO
Symb l may b used with a n merical in icator of
rated P O rotational spe d
ISO 70 0-2 8
Trang 209.5 Tractor with front P O (o er head view of machine)
To identify the control for the front P O of the tract or
To in icate the operational status of the tractor
front P O
Symb l may b used with a n merical in icat or of
rated P O rotational spe d
T is symb l is viewed from the per pective of a
per on lo king at he tractor from a ove the machine
ISO 70 0-2 8
To identify the control for the re r P O of the tract or
To in icate the operational status of the tractor
re r PTO
Symb l may b used with a n merical in icat or of
rated P O rotational spe d
T is symb l is viewed from the per pective of a
per on lo king at he tractor from a ove the machine
ISO 70 0-2 8
10 Harvesting machinery and equipment symbols
ISO/IE
r gis ration n mbe
To identify the control for the he der, he der drive or
c op divider of the harvesting machine
To in icate the operational status of the he der,
he der drive or c op divider
ISO 70 0-3 9 (se 1 2) may b used for he der
that utilize a re l
ISO 70 0-1 79
To identify the control for the he der or he der drive
(with re l)of the harvesting machine
To in icate the operational status of the he der or
he der drive (with re l)
ISO 70 0-3 9
To identify the control for the rever er of the he der
drive of the harvesting machine
To in icate the operational status of the he der drive
rever e fu ction
ISO 70 0-1 8
To identify the control that raises or lower the
he der of the harvesting machine
Ap lication of
ISO 70 0-1 8
Trang 211 5 Heade heig t, raise
Toidentify the control that raises the he der of the
harvesting machine
ISO 70 0-2 42
Toidentify the control that lower the he der of the
harvesting machine
ISO 70 0-2 43
Toidentify the control that al ows the he der t o move
u or down ac ording to the contour of the grou d
Toin icate that the he der is in the flo t con ition
ISO 70 0-16 8
Toidentify the control that sets the pres ure ex ert ed
by the he der when in the flo t con ition
ISO 70 0-3 3
tit orward or r arward
Toidentify the control that adjusts the he der or c op
divider angle (de re of tilt)
ISO 70 0-3 96
Toidentify the control that lower the front of the
he der or drop divider ( ilts the he der or c op
divider forward)
ISO 70 0-3 3
Toidentify the control that raises the front of the
he der or drop divider ( ilts the he der or c op
divider re rward)
ISO 70 0-3 40
Toidentify the control that ent er the width of the
he der of the harvesting machine
Toin icate the he der width
May b used in conju ction with u it of width
me surement
ISO 70 0-3 41
Trang 221 1 Heade row n mbe ; n mbe heade of row s
To identify the control for selecting a particular
he der row or for selecting the n mb r of rows on a
he der
To in icate the n mb r of rows on a he der or the
operational status of a particular he der row
T is symb l is viewed from the per pective of a
per on lo king at he he der from a ove the machine
ISO 70 0-2 04
To identify the control that sets or adjusts the spacing
b tween the rows of a he der
To in icate the spacing b tween rows
T is symb l is viewed from the per pective of a
per on lo king at he he der from a ove the machine
To identify the control that raises or lower the re l
relative to the cut ing platorm of the harvesting
machine
ISO 70 0-1 8
To identify the control that moves the re l forward
or re rward relative t o the cut ing platorm of the
harvesting machine
ISO 70 0-1 84
To identify the control that moves the re l forward
relative to the cut ing platorm of the harvesting
machine
To in icate that the re l is moving forward or is in its
ma imum forward position
ISO 70 0-16 9
To identify the control that moves the re l re rward
relative to the cut ing platorm of the harvesting
machine
To in icate that the re l is moving re rward or is in
its ma imum re rward position
ISO 70 0-16 0
To identify the control that returns the re l to its
preset position relative t o the he der
ISO 70 0-3 45
Trang 231 2 R eel spe d
Toidentify t o control that sets or adjusts the
rotational spe d of the re l
Toin icate the rotational spe d of the re l
ISO 70 0-16 1
Toidentify the control that rotates the re l in the
forward direction
Toin icate that the re l is rotating forward
ISO 70 0-3 42
Toidentify the control that rotates the re l in the
Toidentify the control for the draper, which
conveys c op ac os the width of the he der t o a
central win row
Toin icate the operational status of the draper
T is symb l may b used with a n merical in icator
of draper spe d
T is symb l is viewed from the per pective of a
per on lo king at he draper from a ove the machine
ISO 70 0-3 4
Toidentify the control that sets or adjusts the spe d
of the draper
Toin icate the draper spe d
T is symb l is viewed from the per pective of a
per on lo king at he draper from a ove the machine
ISO 70 0-3 47
Toidentify the control for the of-centre draper, which
conveys c op ac os the width of the he der t o a
win row ofset t o the side of the machine
Toin icate the operational status of the of-centre
draper
T is symb l may b used with a n merical in icator
of of-centre draper spe d
T is symb l is viewed from the per pective of a
per on lo king at he draper from a ove the machine
ISO 70 0-3 49
Toidentify the control that sets or adjusts the spe d
of the of-centre draper
Toin icate the of-centre draper spe d
T is symb l is viewed from the per pective of a
per on lo king at he draper from a ove the machine
ISO 70 0-3 48
Trang 241 2 C o pe
To identify the control of the chop er of the combine
harvest er or other c op proces ing eq ipment
To in icate the operational status of the chop er
ISO 70 0-1 73
To identify the control for the cle ning fan
To in icate the operational status of the cle ning fan
ISO 70 0-1 97
To identify the control that sets or adjusts the
operating spe d of the cle ning fan
To in icate the operating spe d of the cle ning fan
ISO 70 0-3 0
To identify the control for the primary cle ning
(suction)fan
To in icate the operational status of the primary
cle ning (suction)fan
ISO 70 0-3 5
To identify the control that sets or adjusts the
operating spe d of the primary cle ning (suction) fan
To in icate the operating spe d of the primary
cle ning (suction)fan
ISO 70 0-3 5
To identify the control for the secon ary cle ning
(suction)fan, which e tracts u wanted c op resid e
that was not removed by the primary cle ning
(suction)fan
To in icate the operational status of the secon ary
cle ning (suction)fan
ISO 70 0-3 5
To identify the control that sets or adjusts the
operating spe d of the secon ary cle ning (suction)
fan, which e tracts u want ed c op resid e that was
not removed by the primary cle ning (suction) fan
To in icate the operating spe d of the secon ary
cle ning (suction)fan
ISO 70 0-3 5
Trang 251 3 Ma netic metal det ect or
To identify the location of the ma netic metal det ect or
Toin icate the operational status of the ma netic
metal detector
Ap lication of
ISO 70 0-16 7
Toidentify the eq ipment used t o move material by
rotation of the aug r
Toidentify the control for operation of the aug r
T is symb l can b used in conju ction with a
n merical value in icating the capacity of the c op
tan or the amou t of c op in the tan or the
proportion (per enta e)that the c op tan is ful
ISO 70 0-2 48
Toidentify the control for re ulating the c op
moisture cont ent
Toin icate the c op moisture cont ent
T is symb l is ISO 70 0 re ist ered with the title
“R elative h midity; moisture cont ent an a diferent
des ription
ISO 70 0-0 0
Toidentify the control that sets or adjusts the
distance b tween rols of the grain proces or
Toin icate the rol distance of the grain proces or
ISO 70 0-2 0
Toin icate the per enta e or de re of dama ed
grain in the sample
ISO 70 0-3 54
Toin icate the t otal amou t of grain or other c op
that has b en harvest ed since the last reset of the
yield monitor
Symb l may b used in conju ction with the
symb l for cou ter in ISO 37 67-1(ap lication of
ISO 70 0-069 )
ISO 70 0-3 5
Trang 261 4 2 Cro yield
To in icate the amou t of grain or other c op that has
b en harvested per are since the last reset of the
yield monit or
Symb l may b used in conju ction with the
symb l for cou ter in ISO 37 67-1(ap lication of
ISO 70 0-069 )
ISO 70 0-3 4
To identify the control for side-t o-side level ing of the
machine for operation on an incline
T is symb l is viewed from the per pective of a
per on lo king forward along the longitu inal a is of
the machine
ISO 70 0-2 45
To identify the control that raises the lef side of the
machine for operation on an incline that al s away to
the lef of the machine
T is symb l is viewed from the per pective of a
per on lo king forward along the longitu inal a is of
the machine
ISO 70 0-2 4
To identify the control that lower the right side of the
machine for operation on an incline that al s away to
the right of the machine
T is symb l is viewed from the per pective of a
per on lo king forward along the longitu inal a is of
the machine
ISO 70 0-2 47
To identify the control for fore-t o-af leveling of the
ca for operation on an incline
ISO 70 0-2 07
To identify the control for fore-t o-af leveling of the
ca for operation on an incline
ISO 70 0-2 0
To identify the control that al ows the he der to tilt
lateral y lef or right
To in icate the operational status of the he der tilt
fu ction
T is symb l is viewed from the per pective of a
per on lo king forward along the longitu inal a is of
the machine
ISO 70 0-2 8
Trang 271 4 Heade , lat eral ti t lef
Toidentify the control that tilts the he der down
lat eral y to the lef by rotating the he der at its lateral
mid oint
Toin icate that the he der is b ing tilt ed t o the lef or
is in the lef-tilt ed position
T is symb l is viewed from the per pective of a
per on lo king forward along the longitu inal a is of
the machine
ISO 70 0-2 86
Toidentify the control that tilts the he der down
lat eral y to the right by rotating the he der at its
lat eral mid oint
Toin icate that the he der is b ing tilt ed t o the right
or is in the right-tilted position
T is symb l is viewed from the per pective of a
per on lo king forward along the longitu inal a is of
the machine
ISO 70 0-2 87
Toidentify the control that folds down the he der
wings of the harvesting machine
Toin icate that the he der wings are folding down or
are in their down position
T is symb l is viewed from the per pective of a
per on lo king forward along the longitu inal a is of
the machine
ISO 70 0-3 56
Toidentify the control that folds u the he der wings
of the harvesting machine
Toin icate that the he der wings are folding u or are
in their u position
T is symb l is viewed from the per pective of a
per on lo king forward along the longitu inal a is of
the machine
ISO 70 0-3 45
Trang 28No Gra hical symb l Symb l title an desc iption
ISO/IE
r gis ration n mbe
To identify from a side (prof ile) view the machine
used to harvest grain an which combines harvesting,
threshing an cle ning operations
Use as a b se symb lfor developing combine
harvest er symb ls that use a side (prof ile) view
ISO 70 0-2 3
To identify from an overhe d (plan) view the machine
used to harvest grain an which combines harvesting,
threshing an cle ning operations
T is symb l is viewed from the per pective of a
per on lo king at he combine harvester from a ove
the machine
Use as a b se symb lfor developing combine
harvest er symb ls that use an overhe d view
ISO 70 0-2 3
movement ( ide view of machine)
To identify the control that moves the combine
harvest er in the forward direction
To in icate that the combine harvest er is moving
forward
ISO 70 0-16 8
movement ( ide view of machine)
To identify the control that moves the combine
harvest er in the re rward direction
To in icate that he combine harvest er is moving
re rward
ISO 70 0-16 9
movement (o e head view of machine)
To identify the control that moves the combine
harvest er in the forward direction
To in icate that the combine harvest er is moving
forward
T is symb l is viewed from the per pective of a
per on lo king at he combine harvester from a ove
the machine
ISO 70 0-2 40
movement (overhead view of machine)
To identify the control that moves the combine
harvest er in the re rward direction
To in icate that he combine harvest er is moving
re rward
T is symb l is viewed from the per pective of a
per on lo king at he combine harvester from a ove
the machine
ISO 70 0-2 41
Trang 291 7 C mbine harvest er, grou d spe d
Toidentify the display that shows the grou d spe d of
the combine harvest er
To in icat e the grou d spe d of the combine harvest er
ISO 70 0-2 96
control
Toidentify the control that activates the automatic
mode for combine harvester grou d spe d
Toin icate that combine harvester grou d spe d is in
the aut omatic control mode
ISO 70 0-3 8
Toidentify the control that sets the targ t grou d
spe d for the combine harvest er
To in icat e the combine harvest er targ et grou d spe d
ISO 70 0-3 9
Toidentify the control for the combine harvester re r
whe l drive
Toin icate that the combine harvester re r whe l
drive is in normal operation mode
ISO 70 0-2 8
aut omatic o e ation
Toidentify the control that activat es the aut omatic
operation of the combine harvester powered re r
whe ls
Toin icate that the combine harvester powered re r
whe ls are in aut omatic operation mode
Powered re r whe ls are eng g ed an diseng g d
aut omatical y b sed on operating con itions
ISO 70 0-3 9
Toin icate the de re of whe l slip, which is the
diference b tween the actual grou d spe d of the
combine harvester an the grou d spe d implied by
the rotational spe d of the drive whe ls
Toidentify the control that sets or adjusts the de re
of whe l slip at which another action is taken, either
man al y or aut omaticaly
ISO 70 0-3 9
Toidentify the control that activates the automatic
operation of the combine harvest er whe l slip system
Toin icate that the combine harvester whe lslip
system is in aut omatic operation mode
ISO 70 0-3 9
Trang 301 1 C mbine harvest er, r ady t o harves
To in icat e that the eq ipment an mechanisms of the
combine harvest er are re d for harvesting operations
ISO 70 0-3 94
To identify the control for a pro rammed seq ence
of combine harvester operations taken at he en of a
f ield (he dlan )
To in icate the operational status of the he dlan
turning syst em
T is symb l is viewed from the per pective of a
per on lo king at the combine from a ove the machine
ISO 70 0-2 0
To in icate the operational status of the separator
drive system
ISO 70 0-1 78
To identify the control for the he der b ckshaf
To in icate the operational status of the he der
b ckshaft
T is symb l may b used with a n meric in icator of
he der b ckshaf rotational spe d
ISO 70 0-3 4
To identify the control that sets or adjusts the spe d
of the he der b ckshaf
To in icate the he der b ckshaf spe d
Symb l element “ n/min” may b replaced by a
n merical in icator of P O rated spe d
ISO 70 0-3 0
To identify the control for the grain elevat or, which
transports cle n grain to the grain tan
To in icat e the operationalstatus of the grain elevat or
ISO 70 0-1 7 6
Trang 311 2 Tai ings elev t or; tai ings auge
Toidentify the control for the tailings elevat or, which
transports c op material b ck t o the
threshing mechanism for further separation of grain
To in icate the operational status of the tailings
elevator
ISO 70 0-1 7
Toidentify the control for the threshing cy lin er
Toin icate the operational status of the threshing
cy lin er
T is symb l may b used with a n merical in icator
of threshing cy lin er rotational spe d
ISO 70 0-1 74
Toidentify the control that sets or adjusts the
rotational spe d of the threshing cylin er
Toin icate the threshing cy lin er rotational spe d
Symb l element “ n/min” may b replaced by a
n merical in icator of threshing cylin er spe d
ISO 70 0-3 0
Toidentify the f il point for separat or drive oil
Toidentify the container for separat or drive oil
ISO 70 0-2 8
Toidentify the display that provides information
a out the separator drive oil pres ure
Toin icate the separat or drive oil pres ure
ISO 70 0-2 9
Toidentify the separat or drive oil f ilt er
Toidentify the display that provides information
a out the separator drive oil f ilter
Toin icate the operational status of the separat or
drive oil f ilter
ISO 70 0-2 9
Toidentify the display that provides information
a out the separator drive oil temperature
Toin icate the separat or drive oil temperature
ISO 70 0-2 9
Toidentify the control that sets or adjusts the
distance b tween the threshing cy lin er an the
concave
Toin icate the distance b tween the threshing
cy lin er an the concave
ISO 70 0-1 8
Trang 32To identify the control for the straw walker of the
combine harvest er
To in icate the operational status of the straw walker
ISO 70 0-1 75
To identify the control that sets or adjusts the sieve to
al ow larg er or smaler kernels of grain to fal through
the sieve
To in icate the operational status of the sieve
ISO 70 0-1 86
To identify the control for the spre der
To in icate the operational status of the spre der
T is symb l may b used with a n merical in icat or
of threshing cylin er rotational spe d
ISO 70 0-3 47
To identify the control that sets or adjusts the
spre der spe d
To in icate the spre der spe d
ISO 70 0-3 57
To identify the control for the u lo der
To in icate the operational status of the u lo der
T is symb lis viewed from the per pective of a
per on lo king at he u lo der from a ov e the
machine
ISO 70 0-16 2
To identify the control that swings the u lo der away
from the side of the combine harvester t o al ow the
grain tan t o b u lo ded
To in icate that the u lo der is swinging out or has
re ched the out position
T is symb lis viewed from the per pective of a
per on lo king at he u lo der from a ov e the
machine
ISO 70 0-1 87