Tài liệu Installing the Cable Distribution Plate docx

OptiX OSN 3500Contents 6 Installing the Cable Distribution Plate...6-1 6.1 Installation Position...6-1 6.2 Installing the Cable Distribution Plate in the Cabinet...6-2... OptiX OSN 3500F

OptiX OSN 3500

Contents

6 Installing the Cable Distribution Plate 6-1

6.1 Installation Position 6-1 6.2 Installing the Cable Distribution Plate in the Cabinet 6-2

OptiX OSN 3500

Figures Figure 6-1 Installing the cable distribution plate 6-2

OptiX OSN 3500

Plate

About This Chapter

This chapter guides you to install the cable distribution plate.

One cable distribution plate is delivered with one subrack The cable distribution plate is installed over the subrack.

The following table lists the contents of this chapter.

Section Description

6.1Installation Position Describes the position of the cable

distribution plate in the cabinet

6.2Installing the Cable Distribution Plate in the Cabinet

Describes the steps to install the cable distribution plate

6.1 Installation Position

Table 1.1 shows the position of the cable distribution plate in the 2200mm-high cabinet.

Table 1.1 Position for mounting ears

Cable distribution plate Installation position

Cable distribution plate for the lower subrack 37, 38 Cable distribution plate for the upper subrack 62, 63

Note: The holes are numbered from bottom to top The hole at the bottom is numbered 1

6Installing the Cable Distribution Plate

OptiX OSN 3500 Installation Manual

6.2 Installing the Cable Distribution Plate in the Cabinet

Purpose This procedure guides you to install the cable distribution

plate in the cabinet

Tools /Materials Cross screwdriver

Cable distribution plate

Prerequisites The cabinet and the subrack have been installed

Required/As needed Required

Step 2 Secure the cable distribution plate into the cabinet over the subrack See Figure

1.1.

Figure 1.1 Installing the cable distribution plate

End