Tài liệu Fiber Optic Cable Armored In/Outdoor Dry Loose Tube Cables: Riser pptx

SPEC SHEET ADC’s innovative line of indoor/outdoor armored loose tube cables are designed to meet all the rigors of the outside plant environment and have the necessary fire ratings to b

SPEC SHEET

ADC’s innovative line of indoor/outdoor

armored loose tube cables are designed to

meet all the rigors of the outside plant

environment and have the necessary fire

ratings to be installed inside the building.

These cables eliminate the messy gel filler of

traditional loose tube style cables with super

absorbent polymers The installer can place the

cable anywhere in the network, bypassing the

traditional transition points required in most

installations Cables are available with fiber

counts from 2 to 144 fibers

Features:

• No cleaning of gels, greatly reduces

installation time

• Reduces labor costs by eliminating transition

points at the demarcation

• Can be used outdoors or indoors in

riser areas

Applications:

• Between buildings in a campus environment

• Riser rated environments

• Outside plant environments

Compliances:

• Telcordia GR-20-CORE

• Telcordia GR-409-CORE

• EIA/TIA FOTPs

• ETL, (UL) 1666, NEC OFCR, FT-4

• ISO/IEC 11801

• EIA/TIA 568B

w w w a d c c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1

w w w a d c c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1

ENVIRONMENTAL CHARACTERISTICS:

Storage Temperature -40˚ to 85 ˚C (-40˚ to 185 ˚F)

Operating Temperature -40˚ to 75 ˚C (-40˚ to 167 ˚F)

Installation Temperature -20˚ to 60 ˚C (-4˚ to 140 ˚F)

Specifications

250 µm UV Colored Optical Fiber

3.0 mm Thermoplastic Tube Drygel Water Blocked Strength Member

Flame Retardant Inner and Outer Jackets

Interlocking Aluminum Armor

250 µm UV Colored Optical Fiber 3.0 mm Thermoplastic Tube Drygel Water Blocked Strength Member

Flame Retardant Inner and Outer Jackets

Interlocking Aluminum Armor

Central Strength Member

Diameter mm (in)

Maximum Tensile Load N (lbf)

Short Term (install) 1335 (300) 2670 (600) 2670 (600)

Minimum Bend Radius cm (in)

Short Term (install) 29.0 (11.4) 41.7 (16.4) 44.2 (17.4) 46.7 (18.4) 51.8 (20.4)

Long Term 14.5 (5.7) 20.8 (8.2) 22.1 (8.7) 23.4 (9.2) 25.9 (10.2)

MECHANICAL CHARACTERISTICS:

w w w a d c c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1

TRANSMISSION PERFORMANCE—Guaranteed Minimum Link Lengths:

via four 3.125 Gbps channels multiplexed with WWDM technology

Gigabit Ethernet Link Length (SX/LX)

10 Gigabit Ethernet Link Length (SR/LX4) 3

Multimode

(LR/ER)

Maximum Attenuation

(dB/km)

Typical Attenuation

(dB/km)

Bandwidth1

(MHz/km)

850 nm/1300 nm 850 nm/1300 nm 850 nm/1300 nm Multimode

1310 nm/1550 nm 1310 nm/1550 nm 1310 nm/1550 nm

OPTICAL PERFORMANCE:

ADC Telecommunications, Inc., P.O Box 1101, Minneapolis, Minnesota USA 55440-1101 Specifications published here are current as of the date of publication of this document Because we are continuously improving our products, ADC reserves the right to change specifications without prior notice At any time, you may verify product specifications by contacting our headquarters office in Minneapolis ADC Telecommunications, Inc views its patent portfolio as an important corporate asset and vigorously enforces its patents Products or features contained herein may be covered by one or more U.S or foreign patents An Equal Opportunity Employer

1330093 8/05 Original © 2005 ADC Telecommunications, Inc All Rights Reserved

Web Site: www.adc.com

From North America, Call Toll Free: 1-800-366-3891 • Outside of North America: +1-952-938-8080 Fax: +1-952-917-3237 • For a listing of ADC’s global sales office locations, please refer to our web site

*Replace XXX with fiber type:

5U5 = 50/125 µm Ultra Multimode for 550 m 10 Gbps