Technical Service Our shell drawings will be ready in two 2 weeks time from date of receive full complete set of architectural and OFFER SHEET COFICO SUNWAH PEARL OFFER SHEET NO : KKV-
Trang 1
Messrs
RE:
Gentlemen:
We have the pleasure to offer you the following merchandise on the terms and conditions mentioned
here under and subject to our final confirmation.
Date
Shipping Date
Client Name
Project Reference
Product Description
1 Scope of Works
(1) KUMKANG AL FORM
(a) Al-form: All materials other than listed below are to be supplied by jobsite
- ① Al-form, ② Steel support 3 sets, ③ Al Pin, ④ Accessories for assembling
2 Term of Payment
To be discussed.
3 Delivery Date
The first delivery from Pusan port shall be made within 11~12 working weeks from the date of shell drawing
confirmation by client.
4 Technical Service
Our shell drawings will be ready in two (2) weeks time (from date of receive full complete set of architectural and
OFFER SHEET
COFICO
SUNWAH PEARL
OFFER SHEET NO : KKV-170426/1
Destination Packing Term Inspection
Within 60days after the receipt of your L/C COFICO
SUNWAH PEARL The Design and Supply of Al-Form and Climbing System
** REMARKS & CONDITION **
(b) Stair form : Standard for typical floor and this quotation does not include non-typical area
Seocho-Ku, Seoul, Korea Phone : +82 2 3415 4188 Fax : +82 2 3415 4165
Trang 26 Validity Date
This offer is valid for fifteen (15) days from the date of above-written.
7 Other conditions
8 APPENDIX : Summary of Quantity
SIGNED FOR THE SELLER
with client but the material unit rate based on US Dollar (USD) per square meter shall remain unchanged
until further notice.
(4) Conditions which are not shown on this offer sheet/quotation are to be discussed and agreed by both parties.
(3) This pricing quoted are based on available information from client, the final quantity to be supplied will only finalized
(1) Quantity quoted shall be PROVISIONAL and subject to final measurement of the formwork supplied to site.
(2) Location where Kumkang Aluminum Formwork cannot be used, Kumkang kind Co., Ltd
shall supply steel formwork at the same rate as mentioned above The formwork quantity shall be based on
m2 of panels supplied.
Trang 3SUMMARY QUANTITY PROJECT INFORMATION
COFICO
SUNWAH PEARL
TOWER B1 - Typical FL: from 7FL to 48FL, 3250mm Floor height & 200mm slab thickness (Core: Full Al form, Unit: Full Al form)
2017.03.17 Rev 1 estimate for quotation
A FORMWORK
1.1 Alform new $ 102.00
Q'TY AMOUNT Q'TY AMOUNT Q'TY AMOUNT WALL 102 325.000 33,150.00 556.000 56,712.00 881.000 89,862.00 by KK
SLAB 102 28.000 2,856.00 825.000 84,150.00 853.000 87,006.00 by KK
BEAM 102 17.000 1,734.00 101.000 10,302.00 118.000 12,036.00 by KK
STAIR 102 - - 157.000 16,014.00 157.000 16,014.00 by KK
ADDITIONAL QUANTITY 102 - - 246.000 25,092.00 246.000 25,092.00 by KK
SUBTOTAL 370.000 37,740.00 1,885.000 192,270.00 2,255.000 230,010.00
TOTAL AL-FORM 370.000 37,740 1,885.000 192,270 2,255.000 230,010
B ACCESSORIES Estimated, subjected to change upon final design
Q'TY AMOUNT Q'TY AMOUNT Q'TY AMOUNT
0ANCHOR BOLT(L TYPE) 0.190 3,311 629.09 4,730 898.70 8,041 1,527.79 BY KK
0PRIMARY BOLT (BODY BOLT) 0.340 154 52.36 220 74.80 374 127.16 BY KK
1SQUARE WASHER + WING NUT 0.840 154 129.36 220 184.80 374 314.16 BY KK
0D-CONE 0.170 1,155 196.35 1,650 280.50 2,805 476.85 BY KK
SUBTOTAL ANCHOR SET 4,774 1,007.16 6,820 1,438.80 11,594 2,445.96
2AL-WALER BRACKET 1.730 215 371.95 369 638.37 584 1,010.32 BY KK
AL-BOTTOM BRACKET 5.200 99 514.80 165 858.00 264 1,372.80 BY KK
1AL- LONG PIN 0.800 33 26.40 825 660.00 858 686.40 BY KK
AL-ROUND PIN 0.160 5,180 828.80 26,390 4,222.40 31,570 5,051.20 BY KK
0AL- WEDGE PIN 0.060 5,213 312.78 27,215 1,632.90 32,428 1,945.68 BY KK
0AL-BOLT 0.230 385 88.55 1,650 379.50 2,035 468.05 BY KK
SUBTOTAL ACC 11,125 2,143.28 56,614 8,391.17 67,739 10,534.45
TOTAL ANCHOR & ACC 15,899 3,150.44 63,434 9,829.97 79,333 12,980.41
3 Support
Q'TY AMOUNT Q'TY AMOUNT Q'TY AMOUNT Support V2 16.983 95 1,613 1,817 30,858 1,912 32,471.50 BY KK
TOTAL 95 1,613 1,817 30,858 1,912 32,471.50
Estimated only, subjected to final formwork design drawing
Q'TY AMOUNT Q'TY AMOUNT Q'TY AMOUNT
FLAT TIES (mm)
200 0.198 1,848 365.90 - - 1,848 365.904 BY KK
300 0.254 9,610 2,440.94 - - 9,610 2,440.940 BY KK
350 0.364 1,848 672.67 - - 1,848 672.672 BY KK
400 0.377 8,871 3,344.37 - - 8,871 3,344.367 BY KK
500 0.472 - - 72,442 34,192.62 72,442 34,192.624 BY KK
600 0.552 22,916 12,649.63 - - 22,916 12,649.632 BY KK
700 0.624 - - 7,023 4,382.35 7,023 4,382.352 BY KK
SUBTOTAL 45,093 15,994 79,465 38,575 124,558 54,569
C CONTRACT SUMMARY
Q'TY AMOUNT Q'TY AMOUNT Q'TY AMOUNT
1 A/F Anchor & Accessories(Tolerance 10%) 15,899 3,150 63,434 9,830 79,333 12,980.41 BY KK
3 Support 95 1,613 1,817 30,858 1,912 32,471.50 BY KK
4.1 Embedded Ties (FLAT TIE)(Tolerance 10%) 45,093 15,994 79,465 38,575 124,558 54,568.98 BY KK
SUBTOTAL 61,087 20,758 144,716 79,263 205,803 100,020.88
A/F 370.000 37,740 1,885.000 192,270 2,255.000 230,010.00 BY KK
SUBTOTAL 370.00 37,740 1,885.00 192,270 2,255.00 230,010.00
TOTAL 61,457.00 58,498 146,601.00 271,533 208,058.00 330,030.88 SELLING
Not including pin & wedge Not including pin & wedge
COFICO-SUNWAH PEARL
TYPE SELLING
UNIT PRICE
CORE UNIT TOTAL SHMT (USD)
Not including pin & wedge Not including pin & wedge Not including pin & wedge
SCOPE REMARK
TOTAL SHMT (USD)
SCOPE REMARK
1 A/F Anchor & Accessories
ITEM SELLING
UNIT PRICE
COFICO-SUNWAH PEARL
ITEM UNIT PRICE CORE UNIT TOTAL SHMT (USD) SCOPE REMARK
REMARK
4.1 Embedded Ties (FLAT TIE)
TYPE UNIT PRICE CORE UNIT TOTAL SHMT (USD) SCOPE
SCOPE
COFICO-SUNWAH PEARL
TYPE UNIT PRICE CORE UNIT TOTAL SHMT (USD)
Trang 41.1 Alform new $ 102.00
Q'TY AMOUNT Q'TY AMOUNT Q'TY AMOUNT WALL 102 358.000 36,516.00 644.000 65,688.00 1,002.000 102,204.00 by KK
SLAB 102 - - 1,157.000 118,014.00 1,157.000 118,014.00 by KK
BEAM 102 18.000 1,836.00 121.000 12,342.00 139.000 14,178.00 by KK
STAIR 102 - - 157.000 16,014.00 157.000 16,014.00 by KK
ADDITIONAL QUANTITY 102 - - 312.000 31,824.00 312.000 31,824.00 by KK
SUBTOTAL 376.000 38,352.00 2,391.000 243,882.00 2,767.000 282,234.00
TOTAL AL-FORM 376.000 38,352 2,391.000 243,882 2,767.000 282,234
B ACCESSORIES Estimated, subjected to change upon final design
Q'TY AMOUNT Q'TY AMOUNT Q'TY AMOUNT
0ANCHOR BOLT(L TYPE) 0.190 4,290 815.10 4,290 815.10 8,580 1,630.20 BY KK
0PRIMARY BOLT (BODY BOLT) 0.340 220 74.80 220 74.80 440 149.60 BY KK
1SQUARE WASHER + WING NUT 0.840 220 184.80 220 184.80 440 369.60 BY KK
0D-CONE 0.170 1,430 243.10 1,430 243.10 2,860 486.20 BY KK
SUBTOTAL ANCHOR SET - 6,160 1,317.80 6,160 1,317.80 12,320 2,635.60
2AL-WALER BRACKET 1.730 242 418.66 425 735.25 667 1,153.91 BY KK
AL-BOTTOM BRACKET 5.200 110 572.00 193 1,003.60 303 1,575.60 BY KK
1AL- LONG PIN 0.800 - - 1,173 938.40 1,173 938.40 BY KK
AL-ROUND PIN 0.160 5,264 842.24 33,474 5,355.84 38,738 6,198.08 BY KK
0AL- WEDGE PIN 0.060 5,264 315.84 34,647 2,078.82 39,911 2,394.66 BY KK
0AL-BOLT 0.230 385 88.55 2,200 506.00 2,585 594.55 BY KK
SUBTOTAL ACC 11,265 2,237.29 72,112 10,617.91 83,377 12,855.20
TOTAL ANCHOR & ACC 17,425 3,555.09 78,272 11,935.71 95,697 15,490.80
3 Support
Q'TY AMOUNT Q'TY AMOUNT Q'TY AMOUNT Support V2 16.983 42 713 2,680 45,514 2,722 46,227.73 BY KK
TOTAL 42 713 2,680 45,514 2,722 46,227.73
Estimated only, subjected to final formwork design drawing
Q'TY AMOUNT Q'TY AMOUNT Q'TY AMOUNT
FLAT TIES (mm)
200 0.198 586 116.03 - - 586 116.03 BY KK
300 0.254 2,550 647.70 - - 2,550 647.70 BY KK
400 0.377 11,036 4,160.57 4,013 1,512.90 15,049 5,673.47 BY KK
450 0.436 - - 10,032 4,373.95 10,032 4,373.95 BY KK
500 0.472 - - 40,797 19,256.18 40,797 19,256.18 BY KK
600 0.552 23,074 12,736.85 - - 23,074 12,736.85 BY KK
SUBTOTAL 37,246 17,661.15 54,842 25,143.04 92,088 42,804.19
C CONTRACT SUMMARY
Q'TY AMOUNT Q'TY AMOUNT Q'TY AMOUNT
1 A/F Anchor & Accessories(Tolerance 10%) 17,425 3,555 78,272 11,936 95,697 15,490.80 BY KK
3 Support 42 713 2,680 45,514 2,722 46,227.73 BY KK
4.1 Embedded Ties (FLAT TIE)(Tolerance 10%) 37,246 17,661 54,842 25,143 92,088 42,804.19 BY KK
SUBTOTAL 54,713 21,930 135,794 82,593 190,507 104,522.71
A/F 376.000 38,352 2,391.000 243,882 2,767.000 282,234.00 BY KK
SUBTOTAL 376.00 38,352 2,391.00 243,882 2,767.00 282,234.00
TOTAL 55,089.00 60,282 138,185.00 326,475 193,274.00 386,756.71 SELLING
Not including pin & wedge Not including pin & wedge
COFICO-SUNWAH PEARL
TYPE SELLING
UNIT PRICE
CORE UNIT TOTAL SHMT (USD)
Not including pin & wedge Not including pin & wedge Not including pin & wedge
SCOPE REMARK
TOTAL SHMT (USD)
SCOPE REMARK
1 A/F Anchor & Accessories
ITEM SELLING
UNIT PRICE
COFICO-SUNWAH PEARL
ITEM UNIT PRICE CORE UNIT TOTAL SHMT (USD) SCOPE REMARK
4.1 Embedded Ties (FLAT TIE)
TYPE UNIT PRICE CORE UNIT TOTAL SHMT (USD) SCOPE REMARK
SCOPE
COFICO-SUNWAH PEARL
TYPE UNIT PRICE CORE UNIT TOTAL SHMT (USD)
Trang 5SUMMARY QUANTITY PROJECT INFORMATION
COFICO
SUNWAH PEARL
TOWER B3 - Typical FL: from 7FL to 44FL, 3250mm Floor height & 200mm slab thickness (Core: Full Al form, Unit: Full Al form)
2017.03.17 Rev 1 estimate for quotation
A FORMWORK
1.1 Alform new $ 102.00
Q'TY AMOUNT Q'TY AMOUNT Q'TY AMOUNT WALL 102 682.000 69,564.00 1,025.000 104,550.00 1,707.000 174,114.00 by KK
SLAB 102 44.000 4,488.00 1,779.000 181,458.00 1,823.000 185,946.00 by KK
BEAM 102 44.000 4,488.00 220.000 22,440.00 264.000 26,928.00 by KK
STAIR 102 - - 157.000 16,014.00 157.000 16,014.00 by KK
ADDITIONAL QUANTITY 102 - - 477.000 48,654.00 477.000 48,654.00 by KK
SUBTOTAL 770.000 78,540.00 3,658.000 373,116.00 4,428.000 451,656.00
TOTAL AL-FORM 770.000 78,540 3,658.000 373,116 4,428.000 451,656
B ACCESSORIES Estimated, subjected to change upon final design
Q'TY AMOUNT Q'TY AMOUNT Q'TY AMOUNT
0ANCHOR BOLT(L TYPE) 0.190 9,224 1,752.56 4,290 815.10 13,514 2,567.66 BY KK
0PRIMARY BOLT (BODY BOLT) 0.340 473 160.82 220 74.80 693 235.62 BY KK
1SQUARE WASHER + WING NUT 0.840 473 397.32 220 184.80 693 582.12 BY KK
0D-CONE 0.170 3,075 522.75 1,430 243.10 4,505 765.85 BY KK
SUBTOTAL ANCHOR SET 13,245 2,833.45 6,160 1,317.80 19,405 4,151.25
2AL-WALER BRACKET 1.730 451 780.23 671 1,160.83 1,122 1,941.06 BY KK
AL-BOTTOM BRACKET 5.200 220 1,144.00 330 1,716.00 550 2,860.00 BY KK
1AL- LONG PIN 0.800 44 35.20 2,019 1,615.20 2,063 1,650.40 BY KK
AL-ROUND PIN 0.160 10,780 1,724.80 51,212 8,193.92 61,992 9,918.72 BY KK
0AL- WEDGE PIN 0.060 10,824 649.44 53,231 3,193.86 64,055 3,843.30 BY KK
0AL-BOLT 0.230 550 126.50 3,300 759.00 3,850 885.50 BY KK
SUBTOTAL ACC 22,869 4,460.17 110,763 16,638.81 133,632 21,098.98
TOTAL ANCHOR & ACC 36,114 7,293.62 116,923 17,956.61 153,037 25,250.23
3 Support
Q'TY AMOUNT Q'TY AMOUNT Q'TY AMOUNT Support V2 16.983 210 3,566 4,211 71,515 4,421 75,081.84 BY KK
TOTAL 210 3,566 4,211 71,515 4,421 75,081.84
Estimated only, subjected to final formwork design drawing
Q'TY AMOUNT Q'TY AMOUNT Q'TY AMOUNT
FLAT TIES (mm)
300 0.254 8,026 2,038.60 - - 8,026 2,038.60 BY KK
400 0.377 3,679 1,386.98 12,373 4,664.62 16,052 6,051.60 BY KK
500 0.472 - - 67,884 32,041.25 67,884 32,041.25 BY KK
600 0.552 53,170 29,349.84 3,010 1,661.52 56,180 31,011.36 BY KK
700 0.624 - 8,026 5,008.22 8,026 5,008.22 BY KK
1100 0.950 - 1,338 1,271.10 1,338 1,271.10 BY KK
1200 1.022 - - 1,338 1,367.44 1,338 1,367.44 BY KK
SUBTOTAL 64,875 29,349.84 93,969 9,308.28 158,844 38,658.12
C CONTRACT SUMMARY
Q'TY AMOUNT Q'TY AMOUNT Q'TY AMOUNT
1 A/F Anchor & Accessories(Tolerance 10%) 36,114 7,294 116,923 17,957 153,037 25,250.23 BY KK
3 Support 210 3,566 4,211 71,515 4,421 75,081.84 BY KK
4.1 Embedded Ties (FLAT TIE)(Tolerance 10%) 64,875 29,350 93,969 9,308 158,844 38,658.12 BY KK
SUBTOTAL 101,199 40,210 215,103 98,780 316,302 138,990.19
A/F 770.000 78,540 3,658.000 373,116 4,428.000 451,656.00 BY KK
SUBTOTAL 770.00 78,540 3,658.00 373,116 4,428.00 451,656.00
Not including pin & wedge Not including pin & wedge
COFICO-SUNWAH PEARL
TYPE SELLING
UNIT PRICE
CORE UNIT TOTAL SHMT (USD)
Not including pin & wedge Not including pin & wedge Not including pin & wedge
SCOPE REMARK
TOTAL SHMT (USD)
SCOPE REMARK
1 A/F Anchor & Accessories
ITEM SELLING
UNIT PRICE
COFICO-SUNWAH PEARL
ITEM UNIT PRICE CORE UNIT TOTAL SHMT (USD) SCOPE REMARK
4.1 Embedded Ties (FLAT TIE)
TYPE UNIT PRICE CORE UNIT TOTAL SHMT (USD) SCOPE REMARK
SCOPE
COFICO-SUNWAH PEARL
TYPE UNIT PRICE CORE UNIT TOTAL SHMT (USD)