1. Trang chủ
  2. » Thể loại khác

JRC installing IHO

6 100 0

Đang tải... (xem toàn văn)

THÔNG TIN TÀI LIỆU

Thông tin cơ bản

Định dạng
Số trang 6
Dung lượng 618,98 KB

Các công cụ chuyển đổi và chỉnh sửa cho tài liệu này

Nội dung

To install S-63 1.1 Data the latest IHO certificate will need to be installed in your ECDIS.. To install it please insert the S-63 1.1 Media into your ECDIS and follow the steps below: 1

Trang 1

Migrating to IHO Certificate for S-63 1.1 in JRC ECDIS

This guide is based on the JAN 701B/901B ECDIS Version 56

Trang 2

To install S-63 1.1 Data the latest IHO certificate will need to be installed in your ECDIS The

IHO.CRT is located on any AVCS S-63 1.1 Media To install it please insert the S-63 1.1

Media into your ECDIS and follow the steps below:

1 Exit Navigation & Planning mode and select “ChartPortfolio”

2 Select “OK”

1 Migrating from P R IMAR C R T to IHO.C R T

NDC-2000

JAN-901-B

1

2

Trang 3

3 Select “Tool” then “Option”

4 Select the “S-63” Tab

5 Select “Import of Certificate”

3

4

5

Trang 4

6 Select appropriate Drive location from the dropdown

7 Select appropriate folder

8 Select “IHO.CRT” and double click on it to populate the File Name box

9 Select “OK”

10 Select “OK”

11 Select ”OK” (noting the number assigned)

6

7

10

11

The IHO.CRT has now been saved in the system However, before S-63 1.1 data can

be loaded it must be selected in the system

Trang 5

12 Click “Select of Certificate”

13 Select “2:IHO.CRT” from the dropdown (as noted earlier)

14 Select “OK” (N.B It is NOT possible to delete the 0:IHO.CRT from this system)

15 Select “OK”

12

13

14

be now be loaded into the ECDIS

Trang 6

2 R everting to P R IMAR C R T

If for any reason the migration to S-63 1.1 fails then the PRIMAR.CRT file will need to be

re-installed The JRC remembers previously installed certificates and therefore you should be

able to simply select the PRIMAR.CRT

1 To do this select “Tool” from the Chart Portfolio screen

2 Select “Option”

3 Click “Select of Certificate”

4 Select the PRIMAR.CRT from the dropdown and select “OK”

Your system will now be in the same state as before attempting the upgrade and you can

continue to use AVCS S-63 1.0 data However, you should inform your Admiralty Chart

Agent of the problems that you have encountered

UKHO 2013 All Rights Reserved

The copyright in this document, which contains information of a proprietary nature, is vested in UKHO

The content of this document may not be used for purposes other than that for which it has been supplied

and may not be reproduced, either wholly or in part, in any way whatsoever.

Ngày đăng: 15/03/2019, 10:36

TỪ KHÓA LIÊN QUAN