MARIS installing IHO

Migrating to IHO Certificate for S-63 1.1 in Maris ECDIS This guide is based on the Maris 900 ECDIS... To install S-63 1.1 Data the latest IHO certificate will need to be installed in y

Migrating to IHO Certificate for S-63 1.1 in Maris ECDIS

This guide is based on the Maris 900 ECDIS

To install S-63 1.1 Data the latest IHO certificate will need to be installed in your ECDIS The

IHO.CRT is located on any AVCS S-63 1.1 Media To install it please insert the S-63 1.1

Media into your ECDIS and follow the steps below:

Access the “Chart handling” utility by clicking on the ”Chart handling” icon

1 Select “SA certificate” from the chart handling menu

2 The currently installed public key will be displayed at the top of the screen In this case

the “PRIMAR.CRT” is installed

3 Select “Install SA certificate”

4 Browse to the location of the “IHO.CRT” certificate and select “Open” to load the

certificate

5 Select “OK”

The IHO.CRT has now been installed and S-63 1.1 data can be loaded into the ECDIS

1 Migrating from P R IMAR C R T to IHO.C R T

2 R everting to P R IMAR C R T

If for any reason the migration to S-63 1.1 fails then the PRIMAR.CRT file will need to be

re-installed To do this insert any AVCS S-63 1.0 Media into your ECDIS and follow the same

process as outlined above, this time selecting the PRIMAR.CRT.

Your system will now be in the same state as before attempting the upgrade and you can

continue to use AVCS S-63 1.0 data However, you should inform your Admiralty Chart

Agent of the problems that you have encountered

UKHO 2013 All Rights Reserved

The copyright in this document, which contains information of a proprietary nature, is vested in UKHO

The content of this document may not be used for purposes other than that for which it has been supplied

and may not be reproduced, either wholly or in part, in any way whatsoever