Skill 33 - Automobile Technology Competitor Instructions – Automobile Technology Competitor C Competitor Instructions Marking Summary... Skill 33 - Automobile Technology You are requi
Trang 1Test Project Automobile Technology Task C – Electrical
TP33_10TH_actual_VN
Member Country : All Members
Trang 2Skill 33 - Automobile Technology
Competitor Instructions – Automobile Technology
Competitor
C Competitor Instructions
Marking Summary
Trang 3Skill 33 - Automobile Technology
You are required to
- Observe occupational health & safety standards
- Only ask necessary questions
- Not speak to the public while competition
- Comply with Experts instructions
- Ensure Competitor Number on all forms
- Use appropriate tools and procedures
- Complete all instructions on the next page
Remark: Vehicle/Model: Hyundai Sonata YF 2.0 2013 Model Year
Trang 4Skill 33 - Automobile Technology
Competitor
C
1
Check operation of head light
For repairs refer to the expert
Rectify fault
Fill in report form
2
Check operation of washer and wiper system
For repairs refer to the expert
Rectify fault
Fill in report form
3
Check operation of power window system
For repairs refer to the expert
Rectify fault
Fill in report form
4
Check operation of mirror system
For repairs refer to the expert
Rectify fault
Fill in report form
5
Check operation of central locking system
For repairs refer to the expert
Rectify fault
Fill in report form
6
Check operation of reverse light system
For repairs refer to the expert
Rectify fault
Fill in report form
7
Check operation of charging system and output in ampere
For repairs refer to the expert
Rectify fault
Fill in report form
Trang 5Skill 33 - Automobile Technology
Competitor Report Sheet – Automobile Technology
Competitor
C Report Sheet
1 Did the headlights operate normally? [ ] yes [ ] no Fault(s) found:
Rectify :
2 Did the wiper and washer operate normally? [ ] yes [ ] no Fault(s) found:
Rectify:
3 Did the power window operate normally? [ ] yes [ ] no Fault(s) found:
Rectify:
4 Did the mirror operate normally? [ ] yes [ ] no Fault(s) found:
Rectify:
Trang 6Skill 33 - Automobile Technology
5
Did the central locking operate normally? [ ] yes [ ] no Fault(s) found:
Rectify:
6
Did the reverse light operate normally? [ ] yes [ ] no Fault(s) found:
Rectify:
7
Did the charging operate normally? [ ] yes [ ] no Fault(s) found:
Rectify:
Alternator output :
* Do not cut any wire or modify any circuits on the car
Trang 7Skill 33 - Automobile Technology
Form 5 - Automobile Technology
Competitor
Name Country Code Task Marking Scale
C Electrical Systems Marking Summary
Time Keeping
Experts Signatures
Trang 8Skill 33 - Automobile Technology
Competitor
Name Country Code Task Marking Scale
C Electrical Systems
1.1 Select the correct common tools 0.10 0
1.3 Use workshop manual correctly 0.20
1.4 Apply logical working procedure 0.10 0
1.13 Clean up the test vehicle 0.10 0
1.14 Clean up the working area 0.10 0
1.15 Clean up tools and equipment 0.10 0
2.1 Check function of the lights system 0.10 0
2.3 Check continuity from IPS to Bulb 0.20 0
2.5 Check ground connection 0.20 0
2.7 Replace the component / correct the connection 0.20 0
2.8 Check function after replacing parts 0.30 0
Trang 9Skill 33 - Automobile Technology
Competitor
Name Country Code Task Marking Scale
C Electrical Systems
3.1 Check function of the washer and wiper system 0.10 0
3.3 Check continuity between BCM and combination switch 0.20 0
3.4 Check function of the wiper relay 0.20 0
3.5 Check ground connection 0.20 0
3.7 Check washer motor circuit 0.30 0
3.9 Replace the component / correct the
3.10 Check function after replacing parts 0.20 0
4.1 Check function of the power window system 0.20 0
4.5 Check ground connection 0.20 0
4.6 Check power window main switch 0.30 0
4.7 Check the CAN Bus Continuity 0.30 0 By Scan tool (VMI)
4.9 Replace the component / correct the
4.10 Check function after replacing parts 0.30 0
Trang 10Skill 33 - Automobile Technology
Competitor
Name Country Code Task Marking Scale
C Electrical Systems
5.1 Check function of the Power mirror system (Passenger Side) 0.20 0
5.3 Check continuity between junction box and power mirror control switch 0.30 0
5.4 Check continuity between power mirror control switch and motor 0.30 0
5.6 Replace the component / correct the
5.7 Check function after replacing parts 0.30 0
6.1 Check function of the central locking system 0.20 0
6.2 Check positive voltage at door lock relay at junction box 0.20 0
6.3 Check positive voltage at door lock actuator (Rear Left) 0.20 0
6.5 Replace the component / correct the
6.6 Check function after replacing parts 0.30 0
6.7 Check remote control function 0.30 0
Trang 11Skill 33 - Automobile Technology
Competitor
Name Country Code Task Marking Scale
C Electrical Systems
7.1 Check function of the reverse light system 0.20 0
7.2 Check voltage (12V) at range switch at (Reverse Position) 0.20 0
7.4 Check continuity between F10 to EM11 0.20 0
7.5 Check positive voltage at reverse lamp 0.20 0
7.8 Replace the component / correct the
7.9 Check function after replacing parts 0.30 0
8.1 Check function of the charging system 0.20 0
8.3 Check alternator output voltage 0.30 0 From Battery 8.4 Check terminal 2 (socket CHG06) for voltage 0.30 0 From ignition
8.6 Replace complete alternator 0.30
8.7 Check function after replacing parts 0.30 0 Idle rpm