CRUDE OIL ASSAY A FOSTER WHEELER ENERGY LTD PROCESS ENGINEERING 3550-8110-PD-0003 PAGE 2 OF 3 be derived from this crude assay data by process simulation and other means.. CRUDE OIL A
Trang 2CRUDE OIL ASSAY
A
FOSTER WHEELER ENERGY LTD PROCESS ENGINEERING
3550-8110-PD-0003 PAGE 2 OF 3
be derived from this crude assay data by process simulation and other means
2 CRUDE OIL ASSAY DATA
Data on crude oil feedstock properties – crude assay data – have been provided
by Employer The assay data is in the form of assay reports prepared by PetroTech Intel for the crude oil feedstock
Trang 3CRUDE OIL ASSAY
A
FOSTER WHEELER ENERGY LTD PROCESS ENGINEERING
3550-8110-PD-0003 PAGE 3 OF 3
REV D3
The above-referenced assay report is appended to this document
3 ENHANCEMENTS TO AND INTERPRETATION OF ASSAY DATA
Crude assay data presented in the assay report which forms the appendix to this document shall be taken as rely-upon information which does not require critical review to confirm the accuracy of the data
The crude assay data has been reviewed and no quality or consistency issues have been identified with the exception of the item noted below:
The arsenic and mercury levels in the C5-150 naphtha cut in the KEC assay have been superseded by data provided from the KPI refinery at Rotterdam This item was documented in Notes of Meeting between NSRP and UOP – NOM-NAC-UOP-003 dated 24-27th Feb 2009 The actual data comparison is as follows:
KEC Assay C5-150 C KEC Naphtha C5-155 at