3, CRC Press, Boca Raton, Florida, 1975 and Engineered Materials Handbook, Vol.2, Engineering Plastics, ASM International, Metals Park, Ohio, 1988... 3, CRC Press, Boca Raton, Florida, 1
Trang 2Table 215 I MPACT S TRENGTH OF C ARBON - AND G LASS
-R EINFORCED E NGINEERING T HERMOPLASTICS (SHEET 2 OF 2)
Impact Strength, Notched/Unnotched (J/cm)
Data from ASM Engineering Materials Reference Book, Second Edition, Michael Bauccio, Ed., ASM
International, Materials Park, OH, p111–112, (1994)
©2001 CRC Press LLC
Trang 3Shackelford & Alexander
Fracture Toughness (K Ic ), (MPa √m)
Containing 30 Vol % of Metal Carbide Dispersoid (2 µm average particle diameter)
Data from ASM Engineering Materials Reference Book, Second Edition, Michael Bauccio,
Ed., ASM International, Materials Park, OH, p169,(1994)
©2001 CRC Press LLC
Trang 4Source: data from ASM Metals Reference Book, Second Edition, American Society for
Metals, Metals Park, Ohio 44073, p166-167, (1984)
Table 218 T ENSION M ODULUS OF T REATED D UCTILE I RONS
Treatment
Tension Modulus (MPa)
Source: data from ASM Metals Reference Book, Second Edition, American Society for
Metals, Metals Park, Ohio 44073, p169-170, (1984)
©2001 CRC Press LLC
Trang 5Shackelford & Alexander
Mechanical Properties
759
Table 219 T ENSILE M ODULUS OF
F IBERGLASS R EINFORCED P LASTICS
Glass fiber content (wt%)
Tensile modulus (10 5 psi)
Glass fiber reinforced
To convert from psi to MPa, multiply by 145.
Data from ASM Engineering Materials Reference Book, Second Edition, Michael Bauccio, Ed., ASM
International, Materials Park, OH, p106, (1994)
©2001 CRC Press LLC
Trang 6Mechanical Properties
CRC Handbook of Materials Science & Engineering
760
Table 220 T ENSILE M ODULUS OF
G RAPHITE /A LUMINUM C OMPOSITES Composite
Fiber loading (vol %)
Wire diameter (mm)
Tensile Modulus (GPa)
Data from ASM Engineering Materials Reference Book, Second Edition, Michael Bauccio,
Ed., ASM International, Materials Park, OH, p148,(1994)
Table 221 T ENSILE M ODULUS OF
I NVESTMENT C AST S ILICON C ARBIDE SCS–A L Fiber orientation Fiber vol (%)
Tensile Modulus (GPa)
Data from ASM Engineering Materials Reference Book, Second Edition, Michael Bauccio,
Ed., ASM International, Materials Park, OH, p149,(1994)
©2001 CRC Press LLC
Trang 7Shackelford & Alexander
Mechanical Properties
761
Table 222 T ENSILE M ODULUS OF
S ILICON C ARBIDE SCS–2–A L Fiber orientation No of plies
Tensile Modulus (GPa)
Data from ASM Engineering Materials Reference Book, Second Edition, Michael Bauccio,
Ed., ASM International, Materials Park, OH, p149,(1994)
©2001 CRC Press LLC
Trang 8Silicon Carbide (SiC)
To convert from psi to MPa, multiply by 145.
Source: data compiled by J.S Park from No 1 Materials Index, Peter T.B Shaffer, Plenum Press, New York, (1964); Smithells Metals Reference Book, Eric A Brandes, ed., in
association with Fulmer Research Institute Ltd 6th ed London, Butterworths, Boston,
(1983); and Ceramic Source, American Ceramic Society (1986-1991)
©2001 CRC Press LLC
Trang 9Shackelford & Alexander
Trichromium Dicarbide (Cr3C2) 54.1x106
Table 223 Y OUNG ’ S M ODULUS OF C ERAMICS
(SHEET 2 OF 7)
Young’s Modulus (psi) Temperature
To convert from psi to MPa, multiply by 145.
Source: data compiled by J.S Park from No 1 Materials Index, Peter T.B Shaffer, Plenum
Press, New York, (1964); Smithells Metals Reference Book, Eric A Brandes, ed., in
association with Fulmer Research Institute Ltd 6th ed London, Butterworths, Boston,
(1983); and Ceramic Source, American Ceramic Society (1986-1991)
©2001 CRC Press LLC
Trang 10To convert from psi to MPa, multiply by 145.
Source: data compiled by J.S Park from No 1 Materials Index, Peter T.B Shaffer, Plenum Press, New York, (1964); Smithells Metals Reference Book, Eric A Brandes, ed., in
association with Fulmer Research Institute Ltd 6th ed London, Butterworths, Boston,
(1983); and Ceramic Source, American Ceramic Society (1986-1991)
©2001 CRC Press LLC
Trang 11Shackelford & Alexander
To convert from psi to MPa, multiply by 145.
Source: data compiled by J.S Park from No 1 Materials Index, Peter T.B Shaffer, Plenum
Press, New York, (1964); Smithells Metals Reference Book, Eric A Brandes, ed., in
association with Fulmer Research Institute Ltd 6th ed London, Butterworths, Boston,
(1983); and Ceramic Source, American Ceramic Society (1986-1991)
©2001 CRC Press LLC
Trang 12Zirconium Oxide (ZrO2)
To convert from psi to MPa, multiply by 145.
Source: data compiled by J.S Park from No 1 Materials Index, Peter T.B Shaffer, Plenum Press, New York, (1964); Smithells Metals Reference Book, Eric A Brandes, ed., in
association with Fulmer Research Institute Ltd 6th ed London, Butterworths, Boston,
(1983); and Ceramic Source, American Ceramic Society (1986-1991)
©2001 CRC Press LLC
Trang 13Shackelford & Alexander
Mechanical Properties
767
Oxides
(Con’t) Uranium Dioxide (UO2) (Con’t)
Cordierite (2MgO 2Al2O3 5SiO2) 20.16x106
To convert from psi to MPa, multiply by 145.
Source: data compiled by J.S Park from No 1 Materials Index, Peter T.B Shaffer, Plenum
Press, New York, (1964); Smithells Metals Reference Book, Eric A Brandes, ed., in
association with Fulmer Research Institute Ltd 6th ed London, Butterworths, Boston,
(1983); and Ceramic Source, American Ceramic Society (1986-1991)
©2001 CRC Press LLC
Trang 14Mechanical Properties
CRC Handbook of Materials Science & Engineering
768
Oxides
Table 223 Y OUNG ’ S M ODULUS OF C ERAMICS
(SHEET 7 OF 7)
Young’s Modulus (psi) Temperature
To convert from psi to MPa, multiply by 145.
Source: data compiled by J.S Park from No 1 Materials Index, Peter T.B Shaffer, Plenum Press, New York, (1964); Smithells Metals Reference Book, Eric A Brandes, ed., in
association with Fulmer Research Institute Ltd 6th ed London, Butterworths, Boston,
(1983); and Ceramic Source, American Ceramic Society (1986-1991)
©2001 CRC Press LLC
Trang 15Shackelford & Alexander
SiO2–Na2O glass
Source: data compiled by J.S Park from O V Mazurin, M V Streltsina and T P Shvaiko–
Shvaikovskaya, Handbook of Glass Data, Part A and Part B, Elsevier, New York, 1983.
©2001 CRC Press LLC
Trang 16Source: data compiled by J.S Park from O V Mazurin, M V Streltsina and T P Shvaiko–
Shvaikovskaya, Handbook of Glass Data, Part A and Part B, Elsevier, New York, 1983.
©2001 CRC Press LLC
Trang 17Shackelford & Alexander
Mechanical Properties
771
Table 225 E LASTIC M ODULUS OF W ROUGHT S TAINLESS
S TEELS * (SHEET 1 OF 2)
Elastic Modulus (GPa)
Data from ASM Metals Reference Book, Third Edition, Michael Bauccio, Ed., ASM
International, Materials Park, OH, p360, (1993)
©2001 CRC Press LLC
Trang 18Elastic Modulus (GPa)
Data from ASM Metals Reference Book, Third Edition, Michael Bauccio, Ed., ASM
International, Materials Park, OH, p360, (1993)
©2001 CRC Press LLC
Trang 19Shackelford & Alexander
Mechanical Properties
773
Table 226 M ODULUS OF E LASTICITY OF
W ROUGHT T ITANIUM A LLOYS
Modulus of Elasticity (GPa)
Data from ASM Metals Reference Book, Third Edition, Michael Bauccio, Ed., ASM
International, Materials Park, OH, p511, (1993)
©2001 CRC Press LLC
Trang 20To convert psi to MPa, multiply by 145.
Source: data compiled by J.S Park from Charles T Lynch, CRC Handbook of Materials Science, Vol 3, CRC Press, Boca Raton, Florida, 1975 and
Engineered Materials Handbook, Vol.2, Engineering Plastics, ASM International, Metals Park, Ohio, 1988.
8.21 Mechanical L Page 774 Wednesday, December 31, 1969 17:00
©2001 CRC Press LLC
Trang 21
To convert psi to MPa, multiply by 145.
Source: data compiled by J.S Park from Charles T Lynch, CRC Handbook of Materials Science, Vol 3, CRC Press, Boca Raton, Florida, 1975 and
Engineered Materials Handbook, Vol.2, Engineering Plastics, ASM International, Metals Park, Ohio, 1988.
8.21 Mechanical L Page 775 Wednesday, December 31, 1969 17:00
©2001 CRC Press LLC
Trang 22
High performance resins(cycloaliphatic diepoxides)
To convert psi to MPa, multiply by 145.
Source: data compiled by J.S Park from Charles T Lynch, CRC Handbook of Materials Science, Vol 3, CRC Press, Boca Raton, Florida, 1975 and
Engineered Materials Handbook, Vol.2, Engineering Plastics, ASM International, Metals Park, Ohio, 1988.
8.21 Mechanical L Page 776 Wednesday, December 31, 1969 17:00
©2001 CRC Press LLC
Trang 23
To convert psi to MPa, multiply by 145.
Source: data compiled by J.S Park from Charles T Lynch, CRC Handbook of Materials Science, Vol 3, CRC Press, Boca Raton, Florida, 1975 and
Engineered Materials Handbook, Vol.2, Engineering Plastics, ASM International, Metals Park, Ohio, 1988.
8.21 Mechanical L Page 777 Wednesday, December 31, 1969 17:00
©2001 CRC Press LLC
Trang 24
Table 227 M ODULUS OF E LASTICITY IN T ENSION FOR P OLYMERS
(SHEET 5 OF 6)
Modulus of Elasticity in Tension,
(ASTM D638) (l0 5 psi)
To convert psi to MPa, multiply by 145.
Source: data compiled by J.S Park from Charles T Lynch, CRC Handbook of Materials Science, Vol 3, CRC Press, Boca Raton, Florida, 1975 and
Engineered Materials Handbook, Vol.2, Engineering Plastics, ASM International, Metals Park, Ohio, 1988.
8.21 Mechanical L Page 778 Wednesday, December 31, 1969 17:00
©2001 CRC Press LLC
Trang 25
To convert psi to MPa, multiply by 145.
Source: data compiled by J.S Park from Charles T Lynch, CRC Handbook of Materials Science, Vol 3, CRC Press, Boca Raton, Florida, 1975 and
Engineered Materials Handbook, Vol.2, Engineering Plastics, ASM International, Metals Park, Ohio, 1988.
8.21 Mechanical L Page 779 Wednesday, December 31, 1969 17:00
©2001 CRC Press LLC
Trang 26Reinforcement content (vol % ) Fiber orientation
Modulus of Elasticity (GPa)
Data from ASM Engineering Materials Reference Book, Second Edition, Michael Bauccio, Ed., ASM International, Materials Park, OH, p148,(1994).
8.21 Mechanical L Page 780 Wednesday, December 31, 1969 17:00
©2001 CRC Press LLC
Trang 27
* Pitch-base fibers
Table 229 M ODULUS OF E LASTICITY OF
G RAPHITE /M AGNESIUM C ASTINGS *
Fiber Type Fiber content Fiber orientation Casting
Fiber Preform Method
Modulus of Elasticity, 0°
(GPa)
Modulus of Elasticity,90° (GPa)
Data from ASM Engineering Materials Reference Book, Second Edition, Michael Bauccio, Ed., ASM International, Materials Park, OH, p148,(1994).
8.21 Mechanical L Page 781 Wednesday, December 31, 1969 17:00
©2001 CRC Press LLC
Trang 28Mechanical Properties
CRC Handbook of Materials Science & Engineering
782
Table 230 M ODULUS OF E LASTICITY OF
G RAPHITE /A LUMINUM C OMPOSITES
Thornel Fiber
Longitudinal Modulus of Elasticity (GPa)
Transverse Modulus of Elasticity (GPa)
Data from ASM Engineering Materials Reference Book, Second Edition, Michael Bauccio,
Ed., ASM International, Materials Park, OH, p148,(1994)
Table 231 M ODULUS OF E LASTICITY
OF G RAPHITE F IBER R EINFORCED M ETALS
Composite
Fiber content (vol%)
Modulus of Elasticity (10 6 psi)
(a) Thornel 75 fiber (b) Courtaulds HM fiber
To convert from psi to MPa, multiply by 145.
Data from ASM Engineering Materials Reference Book, Second Edition, Michael Bauccio,
Ed., ASM International, Materials Park, OH, p148,(1994)
©2001 CRC Press LLC
Trang 29Shackelford & Alexander
Mechanical Properties
783
Table 232 M ODULUS OF E LASTICITY OF
S I C-W HISKER –R EINFORCED A LUMINUM A LLOY
Range of Measurement
Data from ASM Engineering Materials Reference Book, Second Edition, Michael Bauccio,
Ed., ASM International, Materials Park, OH, p150,(1994)
©2001 CRC Press LLC
Trang 30Mechanical Properties
CRC Handbook of Materials Science & Engineering
784
* These samples contain 48% Avco (142 µm) boron Longitudinal tensile specimens are 152
mm by 7.9 mm by 6 ply Transverse tensile bars are 152 mm by 12.7 mm by 6 ply
Table 233 M ODULUS OF E LASTICITY OF
P OLYCRYSTALLINE –A LUMINA –R EINFORCED
A LUMINUM A LLOY
Fiber Content (vol %)
Modulus of Elasticity
(GPa)
Standard Deviation
Range of Measurement
Data from ASM Engineering Materials Reference Book, Second Edition, Michael Bauccio,
Ed., ASM International, Materials Park, OH, p154,(1994)
Table 234 M ODULUS OF E LASTICITY OF
B ORON /A LUMINUM C OMPOSITES *Matrix Fiber Orientation
Modulus of Elasticity (GPa)
Data from ASM Engineering Materials Reference Book, Second Edition, Michael Bauccio,
Ed., ASM International, Materials Park, OH, p157,(1994)
©2001 CRC Press LLC
Trang 31Shackelford & Alexander
Mechanical Properties
785
Table 235 C OMPRESSION M ODULUS OF
T REATED D UCTILE I RONSTreatment
Compression Modulus (MPa)
Source: data from ASM Metals Reference Book, Second Edition, American Society for
Metals, Metals Park, Ohio 44073, p169-170, (1984)
Table 236 M ODULUS OF E LASTICITY IN C OMPRESSION
FOR P OLYMERS
Polymer
Modulus of Elasticity in Compression,
(ASTM D638) (l0 5 psi)
Fluorocarbons; Molded,Extruded
To convert from psi to MPa, multiply by 145.
Source: data compiled by J.S Park from Charles T Lynch, CRC Handbook of Materials
Science, Vol 3, CRC Press, Boca Raton, Florida, 1975 and Engineered Materials Handbook,
Vol.2, Engineering Plastics, ASM International, Metals Park, Ohio, 1988.
©2001 CRC Press LLC
Trang 32SiO2-Na2O glass
SiO2-PbO glass
Source: data compiled by J.S Park from O V Mazurin, M V Streltsina and T P
Shvaiko-Shvaikovskaya, Handbook of Glass Data, Part A and Part B, Elsevier, New York, 1983
©2001 CRC Press LLC
Trang 33Shackelford & Alexander
Source: data compiled by J.S Park from O V Mazurin, M V Streltsina and T P Shvaiko–
Shvaikovskaya, Handbook of Glass Data, Part A and Part B, Elsevier, New York, 1983.
©2001 CRC Press LLC
Trang 34Source: data compiled by J.S Park from O V Mazurin, M V Streltsina and T P Shvaiko–
Shvaikovskaya, Handbook of Glass Data, Part A and Part B, Elsevier, New York, 1983.
©2001 CRC Press LLC
Trang 35Shackelford & Alexander
Source: data from ASM Metals Reference Book, Second Edition, American Society for
Metals, Metals Park, Ohio 44073, p166-167, (1984)
Table 240 T ORSION M ODULUS OF T REATED D UCTILE I RONS
Treatment
Torsion Modulus (MPa)
Source: data from ASM Metals Reference Book, Second Edition, American Society for
Metals, Metals Park, Ohio 44073, p169-170, (1984)
©2001 CRC Press LLC
Trang 36
Table 241 M ODULUS OF E LASTICITY IN F LEXURE
FOR P OLYMERS (SHEET 1 OF 13)
Modulus of Elasticity in Flexure (ASTM D790) (10 5 psi)
Moldings:
To convert from psi to MPa, multiply by 145.
Source: data compiled by J.S Park from Charles T Lynch, CRC Handbook of Materials Science, Vol 3, CRC Press, Boca Raton, Florida, 1975 and
Engineered Materials Handbook, Vol.2, Engineering Plastics, ASM International, Metals Park, Ohio, 1988.
8.23 Mechanical L Page 790 Wednesday, December 31, 1969 17:00
©2001 CRC Press LLC
Trang 37
Table 241 M ODULUS OF E LASTICITY IN F LEXURE
FOR P OLYMERS (SHEET 2 OF 13)
Modulus of Elasticity in Flexure (ASTM D790) (10 5 psi)
To convert from psi to MPa, multiply by 145.
Source: data compiled by J.S Park from Charles T Lynch, CRC Handbook of Materials Science, Vol 3, CRC Press, Boca Raton, Florida, 1975 and
Engineered Materials Handbook, Vol.2, Engineering Plastics, ASM International, Metals Park, Ohio, 1988.
8.23 Mechanical L Page 791 Wednesday, December 31, 1969 17:00
©2001 CRC Press LLC
Trang 38Table 241 M ODULUS OF E LASTICITY IN F LEXURE
FOR P OLYMERS (SHEET 3 OF 13)
Modulus of Elasticity in Flexure (ASTM D790) (10 5 psi)
To convert from psi to MPa, multiply by 145.
Source: data compiled by J.S Park from Charles T Lynch, CRC Handbook of Materials Science, Vol 3, CRC Press, Boca Raton, Florida, 1975 and
Engineered Materials Handbook, Vol.2, Engineering Plastics, ASM International, Metals Park, Ohio, 1988.
8.23 Mechanical L Page 792 Wednesday, December 31, 1969 17:00
©2001 CRC Press LLC
Trang 39Table 241 M ODULUS OF E LASTICITY IN F LEXURE
FOR P OLYMERS (SHEET 4 OF 13)
Modulus of Elasticity in Flexure (ASTM D790) (10 5 psi)
To convert from psi to MPa, multiply by 145.
Source: data compiled by J.S Park from Charles T Lynch, CRC Handbook of Materials Science, Vol 3, CRC Press, Boca Raton, Florida, 1975 and
Engineered Materials Handbook, Vol.2, Engineering Plastics, ASM International, Metals Park, Ohio, 1988.
8.23 Mechanical L Page 793 Wednesday, December 31, 1969 17:00
©2001 CRC Press LLC
Trang 40Table 241 M ODULUS OF E LASTICITY IN F LEXURE
FOR P OLYMERS (SHEET 5 OF 13)
Modulus of Elasticity in Flexure (ASTM D790) (10 5 psi)
To convert from psi to MPa, multiply by 145.
Source: data compiled by J.S Park from Charles T Lynch, CRC Handbook of Materials Science, Vol 3, CRC Press, Boca Raton, Florida, 1975 and
Engineered Materials Handbook, Vol.2, Engineering Plastics, ASM International, Metals Park, Ohio, 1988.
8.23 Mechanical L Page 794 Wednesday, December 31, 1969 17:00
©2001 CRC Press LLC