Ebook Photoshop Easy-Hard part 155 pdf

Create a new layer and drop below the duplicate.. Duplicate the layer then open Color Range and set Fuzziness to 0.. The type is in it's own layer so we can develop our Layer Style.. To

Technical Support Forum : http://vietdown.org/vbb/index.php

Color tinting

That trendy color tinted effect explained here In 3 easy steps!

By Colin Smith www.photoshopcafe.com

Start with your image in RGB mode

1 Open the Hue/Saturation box Ctrl/Cmd+U

2 Click the colorize box

3 Slide the hue slider to change the color hue That simple!

You can adjust the Saturation if you want To the left, less color,

to the right more Too easy!

The result!

Technical Support Forum : http://vietdown.org/vbb/index.php

Coloring A Bunny Sketch

Jacquelin Vanderwood

1

Scan in the sketch Change it's Color Mode to RGB or CMYK Select Color Range with Fuzziness set at 0 Click in the white area and press OK Create a duplicate layer and press Delete to clear the white area Create a new layer and drop below the duplicate Click on the Brush tool and select the Dry Media brush set Select the Pastel Medium brush and block in color as shown below

2

Change color and to new Charcoal Scraping Paper brush Block in the jacket color

3

Change to Soft Oil Pastel and to a new color such as mauve Color in the shadows of the jacket

4

Change the brush mode to Multiply Click on the face color and add shadows

to the face, hand, feet and tail

5

Using the same brush but changing to a darker shadow color, add a shadow on the ground Change to Normal brush mode and add a background color

Maybe some text and we're done

Technical Support Forum : http://vietdown.org/vbb/index.php

Coloring A Pencil Sketch of a Cartoon Robot

Jacquelin Vanderwood

1

The first thing you need to do is scan in the sketch in black and white Change the Color Mode to RGB or CMYK depending on it's use From there use the Eraser tool to clean it up Duplicate the layer then open Color Range and set Fuzziness to 0 Click in the white area Press OK and delete Next, create a new layer Drop that layer below the duplicate Under Calligraphic brushes, select the Oval 35 px Select a color at 100% opacity and begin to paint in the

area It does not have to be perfect

2

Fill in the areas as shown below with three basic colors Watch for the shadow and highlight areas

3 Add in darker shadow areas for more contrast using the same colors

4 With a new color, add some extra color into the face

5 Add a bright color for the chest lights

6 Add color to the motion trails

7

On a new layer below the last one paint in an indication of a sky Type in some text and you are finished

Technical Support Forum : http://vietdown.org/vbb/index.php

Combining Automation Elements

Al Ward, Action Fx Photoshop Actions Resource

http://actionfx.com

This summer has been miserable! I've had some illness bordering on

pneumonia twice now, and just can't seem to shake it This has definitely tied me to the chair in my office, however, and as a result I've had mucho time-o to spend in Photoshop In that regard the summer hasn't been too bad… I guess those trout will still be in the streams next summer

I started out in Photoshop learning from actions, and pretty much stayed within that small niche for a number of years What can I say? Change is usually healthy, but not always desired Prior to Photoshop 6 I was content

to stay put… not so anymore Photoshop 6 is just too powerful for one to squander all their time developing in one area, using the same old set of tools for familiarity's sake

Thus it occurred that my focus shifted to developing Layer Styles That naturally led to developing elements to be applied to styles, such as curves, patterns, gradient, etc

So what happens when you bring all these elements together? For instance, say I create an action that requires a certain Layer Style which, in turn, requires certain other elements like custom patterns, curves, and so on? After some experimenting I've found that this is indeed powerful… the effects can be incredible

The key is working in reverse By that I mean you develop your Style

Elements, Create the Style, then incorporate them into an action

Ok, intro over Let's start with some white type on a black background The type is in it's own layer so we can develop our Layer Style

Select the Type layer To develop a style for this layer, click the layer styles icon on the bottom of the layers palette and select blending options

Let me say in advance that I've already created a custom pattern set for this tutorial, so I won't walk thru the process this time around

That being said, let's start by filling our type with a pattern With the Layer Styles window open, select Pattern Overlay Load your custom pattern set (the set I used is included in the included zip file), and choose a pattern to fill your text with

Add a few more elements to the style Try a bevel, a stroke, gradient

overlay, etc

Here's my resulting Layer Style (it is Style 13 in the included Style Set):

Con tem Sexy - Sexy Stamp

Gửi bởi: Final Fantasy

Bạn có phải là người thích chới tem không? Tôi thì không phải, nhưng tôi muốn tạo cho tôi một con tem riêng Và tôi đặt tên cho nó là "con tem Sexy"

1 Mở một file ảnh mà bạn thích Hoa lá cành gì thì tuỳ còn tôi chọn hình này

2 Cắt một phần nếu hình của bạn lớn, hoặc bạn dùng Transformation để thu nhỏ nó thì tuỳ

3 Mở một tài liệu mới, nền Transparent và kéo phần ảnh ở cửa sổ bên kia qua bằng Move Tool

4 Tạo một layer mới bên dưới layer ảnh của bạn đặt tên cho nó là Nền

5 Nhấp chuột chọn layer Nền và giữ phím Ctrl-click vào layer ảnh

6 Select > Modify > Expand Giá trị tôi cho là 15 px Tuỳ bạn thích viền của con tem to nhỏ gì thì tuỳ theo ý bạn Sau đó tô cho nó màu trắng

7 Chọn Eraser Tool ở phần trên Navigator nhấn nút Brushes

- Nháy đúp vào "Brush tip Shape" với Spacing = 190

8 Chọn công cụ Rectangular Tool (Không phải là Rectangular Marquee Tool đâu nhé)! ở trên thanh Option bạn nhấn vào nút Paths ở giữa như hình này

9 Ở Layer Nền, bạn vẽ một vùng vừa khít với layer Nền trắng Sau đó nháy chuột phải > Stroke Path Ở ô Tool bạn chọn Eraser

10 Bạn sẽ được hình này và cũng là kết quả!

- Chú ý: khi bạn dùng Path mà nó có một ô vuông bao quanh, thì bạn vào View > Extra

Là nó sẽ hết

- Nếu cạnh bên trái của bạn có những chỗ hơi cách rời nhau quá, bạn có thể dùng Eraser

để nối nó lại