Iec 62769 103 1 2015

Parameter names or atributes can also b con tru ted by u in an u ders ore c aracter to con atenate two or more terms s c as: • PROFILE_ID or • Prof ibu _PA_Network 5 Prof ile f or PROFIB

Field device int egrat ion (FDI) –

Part 103- 1: Profi es – PR OFIBUS

Int égrat ion des apparei s de t er ain (FDI) –

Part ie 103- 1: Profi s – PR OFIBUS

THIS PUBLICATION IS COPYRIGHT PROTECTED

Copyr ight © 2 15 IEC, Ge e a, Switzer la d

Al rig ts r es r ve Unle s oth rwis s e ifi d, n p rt of this p blc tio ma b r epr od c d or uti z d in a y form

or b a y me n , ele tr onic or me h nic l in lu in p oto o yin a d microfim, with ut p rmis io in wr itin from

eith r IEC or IEC's memb r Natio al Commite in th c u tr y of th re u ste If y u h v a y q e tio s a o t IEC

c p r i ht or h v a e q ir y a o t o tainin a ditio al ri hts to this p blc tio , ple s c nta t th a dr es b low or

y ur lo al IEC memb r Natio al Commite for ur th r informatio

Dr oits d r eprod ctio ré er vé Sa f in ic tio c ntraire, a c n p rtie d c te p blc tio n p ut êtr e repro uite

ni uti s e s u q elq e forme q e c s it et p r a c n pro é é, éle troniq e o mé a iq e, y c mp s la p oto o ie

et le micr ofilms, s n la c rd é rit d l EC o d Comité n tio al d l EC d p y d d ma d ur Si v u a e d s

q e tio s s r le c p r i ht d l EC o si v u d sire o te ir d s droits s p léme tair es s r c te p blc tio , uti s z

le c ord n é s ci-a r ès o c nta te le Comité n tio al d l EC d v tr ep y d résid n e

Th Intern tio al Ele trote h ic l Commis io (IEC) is th le din glo al org niz tio th t pr ep res a d p bls e

Internatio al Sta d r ds for al ele tri al ele tr onic a d relate te h olo ie

Abo t IEC p blc tio s

Th te h ic l c nte t of IEC p blc tio s is k pt u d r c n ta t r eview b th IEC Ple s ma e s re th t y u h v th

late t e itio ,a c rrig n a or a ame dme t mig t h v b e p bls e

IEC Cat alo ue - webst ore.e ch/ cat alo ue

Th st an -alo e a plc t io for c n ultin th e tire

biblo ra hic l informat io o IEC Intern tio al Sta d rd ,

Te h ic l Sp cific tio s, Te h ic l R ep rts a d oth r

d c me ts A v aia le for P , Ma OS, A ndroid Ta let s a d

iPa

IEC p blc t i ns s arch - www ie ch/ se rch u

Th a v an e s arc e a le to fin IEC p blc t io s b a

variety of crit eria (efere c n mb r, t ext, t ec nic l

c mmitt e,…) It als gives informatio o projec t s, re la e

a d wit hdrawn p blc tio s

IEC Just P blshed - webst ore.e ch/ just pu lshed

St ay u to d te o al n w IEC p blc t io s Ju t Pu ls e

d t ais al n w p blc t io s rele s d A v aia le o ln a d

als o c a mo t h b emai

Ele t ro edia - www ele t ro edia.org

Th world's le din o ln dic t io ary of elec t ro ic a d

ele t ric l t erms c nt ainin more th n 3 0 0 terms a d

d finitio s in En ls a d Fre c , wit h e uiv ale t t erms in 15

a ditio al la g a e Als k nown a t he Int ern t io al

Elec t rot ec nic l Vo a ulary (IEV ) o ln

IEC Glos ar y - st d.e ch/ glos ary

More t ha 6 0 0 ele t rot ec nic l termin lo y e t rie in

En ls a d Fre c e tra t ed fom t he Terms a d Definitio s

cla s of IEC p blc t io s is u d sin e 2 0 Some e t rie

h v e b e c le t ed fom e rler p blc tio s of IEC TC 3 ,

7 ,8 a d CISPR

IEC Cust omer Servic Cent re - webst ore.ec ch/ csc

If y ou wis to giv e u your fe d a k o t his p blc tio or

n e furt her a sist an e, ple s c nt act h Cu t omer Serv ic

Ce t re:c c@ie c

A pro os de l'IEC

L Commis io Ele trote h iq e Inter natio ale (IEC) e t la premièr e orga is tio mo diale q i éla or e et p ble d s

Norme internatio ale p ur to t c q i a trait à léle tri ité,à léle tr oniq e et a x te h olo ie a p re té s

A pro os de p blc t i ns IEC

L c nte u te h iq e d s p blc tio s IEC e t c n tamme t rev Ve i e v u a s r er q e v u p s é e lé itio la

plu r éc nte, u c r rig n um o ame d me t p ut a oir été p blé

Cat alo ue IEC - webst ore.e ch/ cat alo ue

Applc t io a t on me p ur c n ult er t ou le re s ig eme t s

biblo ra hiq e s r le Norme intern t io ale ,

Sp cific t io s t ec niq e , R ap ort s te h iq e et a tre

d c me ts d l EC Dis o ible p ur P , Ma OS, t ablett es

A ndroid et iPa

Recherche de p blc t i ns IEC - w ww ie ch/ se rch u

L re h rc e avan é p rmet d t ro ver d s p blc tio s IEC

e uti s nt difére t s crit ère (n méro d référe c , t exte,

c mit é d’ét ud s,…) Ele d n e a s i d s informatio s s r le

projets et le p blc t io s remplac ée o retiré s

IEC Just P blshed - webst ore.e ch/ just pu lshed

R este informé s r le n uvele p blc t io s IEC Ju t

Pu ls e d tai e le n uv ele p blc t io s p ru s

Dis o ible e lg e et a s i u e fois p r mois p r emai

Ele t ro edia - www.ele t ro edia.org

L premier dic t io n ire e lg e d t erme éle tro iq e et

éle triq e I c ntie t plu d 3 0 0 terme et d finit io s e

a glais et e fa ç is, ain i q e le terme é uiv ale t s d n

15 la g e a ditio n le Eg leme t a p lé Vo a ulaire

Elec trote h iq e Int ern tio al (IEV) e lg e

Glos aire IEC - st d.e c h/ glos ar y

Plu d 6 0 0 e t ré s t ermin lo iq e élec t rot ec niq e , e

a glais et e fa ç is, e traite d s art icle Terme et

Définit io s d s p blc tio s IEC p ru s d p is 2 0 Plu

c rt ain s e tré s a t érie re e traite d s p blc t io s d s

CE 3 , 7 , 8 et CISPR d l EC

Serv ic Clent s - w ebst ore.e c h/ cs

Si vou d sire n u d n er d s c mme taire s r c tt e

p blc t io o si v ou av ez d s q e t io s c nt ac t ez-n u :

c c@iec c

Field device int egrat ion (FDI) –

Part 103- 1: Profi es – PR OFIBUS

Int égrat ion des apparei s de t er ain (FDI) –

Part ie 103- 1: Profi s – PR OFIBUS

W arnin ! Mak e s re that you o tain d this publc tion from a a t horize distributor

At te tion! V eui ez vou a s rer q e vou a ez o te u c t te publc t ion via u distribute r a ré

c olour

inside

FOREWORD 4

INTRODUCTION 6

1 Sco e 7

2 Normative ref eren es 7

3 Terms, def i ition , a breviated terms an acron ms 8

3.1 Terms an def i ition 8

3 2 Ab reviated terms an acron ms

8 4 Con ention 8

4.1 EDDL s ntax 8

4.2 XML s ntax 8

4 3 Ca ital zation

8 5 Prof ile for PROFIBUS 9

5.1 General 9

5.2 Catalog profie 9

5.2.1 Protocol s p ort f ile

9 5.2.2 Commu icationProf ile def i ition 9

5.2.3 Profie device 10 5.2.4 Protocol version information 10 5.3 As ociatin a Pac age with a device 1

5.3.1 Device typ identif i ation ma pin 1

5.3.2 Device typ revision ma pin 12 5.4 Inf ormation Model ma pin 13 5.4.1 ProtocolTyp def i ition 13 5.4.2 DeviceTyp ma pin 14 5.4.3 Fu ctionalGroup identification definition 14 5.5 To olog elements 15 5.5.1 Con ectionPoint definition 1

5 5.5.2 Commu ication Device definition 17 5.5.3 Commu ication service provider def i ition 18 5.5.4 Network def i ition 18 5.6 Method 19 5.6.1 Method for FDI Commu ication Servers 19 5.6.2 Method for Gateway 21

(normative) To olog Scan res lt s hema 2

An ex A A.1 General 2

A.2 Network 2

A.3 Prof ibu NetworkT 2

A.4 Profibu Con ectionPointT 2

A.5 Prof ibu IdentificationT 2

A.6 Prof ibu Ad res T 3

(normative) Tran fer service p rameters 31

An ex B B.1 General 31

B.2 sen Data 31

B.3 x receiveData 31

B.4 x Tran f erSen DataT 31

B.5 Tran f erRes ltDataT 3

B.6 Op rationT 3

Biblogra h 3

Fig re 1 – Version ma pin pro lem 12 Ta le 1 – ProtocolSup ortFi e for FDI Device Pac ages 9

Ta le 2 – ProtocolSup ortFi e for FDI Commu ication Pac ages 9

Ta le 3 – PROFIBUS Commu icationProf ile definition s hema 10 Ta le 4 – Catalog values for profi e devices 10 Ta le 5 – Version ma pin examples 1

Ta le 6 – Device identification information ma pin 12 Ta le 7 – Protocol typ Prof ibu _DP 13 Ta le 8 – Protocol typ Profibu _PA 14 Ta le 9 – DeviceTyp pro erty ma pin 14 Ta le 10 – PROFIBUS Device Typ s identification at ributes 14 Ta le 1 – Con ectionPoint typ for Profibu _DP 15 Ta le 12 – Con ectionPoint typ for Profibu _PA 16 Ta le 13 – Method Con ect arg ments 19 Ta le 14 – Method Dis on ect arg ments 19 Ta le 15 – Method Tran f er arg ments 2

Ta le 16 – Method SetAd res arg ments 21

Ta le 17 – Con ect service arg ments 2

Ta le 18 – Method Tran f er arg ments 2

Ta le 19 – Method SetAd res arg ments 2

Ta le A.1 – Elements of Prof ibu NetworkT 2

Ta le A.2 – Atributes of Profibu Con ectionPointT 2

Ta le A.3 – Elements of Prof ibu Con ectionPointT 2

Ta le A.4 – Atributes of Profibu IdentificationT 3

Ta le B.1 – Atributes of Tran ferSen DataT 3

Ta le B.2 – Atributes of Tran ferRes ltDataT 3

INTERNATIONAL ELECTROTECHNICAL COMMISSION

_

FIELD DEVICE INTEGRA TION (FDI) –

Part 103-1: Profiles – PROFIBUS

1 Th Intern tio al Ele trote h ic l Commis io (IEC) is a worldwid org niz tio for sta d rdiz tio c mprisin

al n tio al ele trote h ic l c mmite s (IEC Natio al Commite s) Th o je t of IEC is to promote

intern tio al c -o eratio o al q e tio s c n ernin sta d rdiz tio in th ele tric l a d ele tro ic f i ld To

this e d a d in a ditio to oth r a tivitie , IEC p bls e Intern tio al Sta d rd , Te h ic l Sp cif i atio s,

Te h ic l Re orts, Pu lcly Av ia le Sp cif i atio s (P S) a d Guid s (h re f ter refer e to a “IEC

Pu lc tio (s)”) Th ir pre aratio is e tru te to te h ic l c mmite s; a y IEC Natio al Commite intere te

in th s bje t d alt with ma p rticip te in this pre aratory work Intern tio al g v rnme tal a d n n

-g v rnme tal org niz tio s laisin with th IEC als p rticip te in this pre aratio IEC c la orate clo ely

with th Intern tio al Org niz tio f or Sta d rdiz tio (ISO) in a c rd n e with c n itio s d termin d b

a re me t b twe n th two org niz tio s

2) Th f ormal d cisio s or a re me ts of IEC o te h ic lmaters e pre s, a n arly a p s ible,a intern tio al

c n e s s of o inio o th rele a t s bje ts sin e e c te h ic l c mmite h s re re e tatio fom al

intere te IEC Natio al Commite s

3) IEC Pu lc tio s h v th form of re omme d tio s f or intern tio al u e a d are a c pte b IEC Natio al

Commite s in th t s n e Whie al re s n ble ef forts are ma e to e s re th t th te h ic l c nte t of IEC

Pu lc tio s is a c rate, IEC c n ot b h ld re p n ible for th wa in whic th y are u e or for a y

misinterpretatio b a y e d u er

4) In ord r to promote intern tio al u if ormity, IEC Natio al Commite s u d rta e to a ply IEC Pu lc tio s

tra s are tly to th ma imum e te t p s ible in th ir n tio al a d re io al p blc tio s An div rg n e

b twe n a y IEC Pu lc tio a d th c re p n in n tio al or re io al p blc tio s al b cle rly in ic te in

th later

5) IEC its lf d e n t pro id a y ate tatio of c nf ormity In e e d nt c rtific tio b die pro id c nf ormity

a s s me t s rvic s a d, in s me are s, a c s to IEC mark of c nf ormity IEC is n t re p n ible f or a y

s rvic s c rie o t b in e e d nt c rtif i atio b die

6) Al u ers s o lde s re th t th y h v th late t e itio of this p blc tio

7) No la i ty s al ata h to IEC or its dire tors, emplo e s, s rv nts or a e ts in lu in in ivid al e p rts a d

memb rs of its te h ic l c mmite s a d IEC Natio al Commite s f or a y p rs n l injury, pro erty d ma e or

oth r d ma e of a y n ture wh ts e er, wh th r dire t or in ire t, or for c sts (in lu in le al f ee ) a d

e p n e arisin o t of th p blc tio , u e of, or rela c u o , this IEC Pu lc tio or a y oth r IEC

Pu lc tio s

8) Ate tio is drawn to th Normativ refere c s cite in this p blc tio Us of th refere c d p blc tio s is

in is e s ble for th c r e t a plc tio of this p blc tio

International Stan ard IEC 6 7 9-10 -1 has b en pre ared by s bcommite 6 E: Devices

an integration in enterprise s stems, of IEC tec nical commite 6 : In u trial-proces

me s rement, control an automation

The text of this stan ard is based on the f ol owin doc ments:

Ful inf ormation on the votin f or the a proval of this stan ard can b foun in the re ort on

votin in icated in the a ove ta le

This publ cation has b en draf ted in ac ordan e with the ISO/IEC Directives, Part 2

A l st of al p rts in the IEC 6 7 9 series, publ s ed u der the general title Fiel d De ic

I ntegration (FDI ), can b f ou d on the IEC we site

The commit e has decided that the contents of this publ cation wi remain u c an ed u ti

the sta i ty date in icated on the IEC we site u der "ht p:/webstore.iec.c " in the data

related to the sp cif i publ cation At this date, the publ cation wi b

• with rawn,

• re laced by a revised edition, or

IMPORTANT – The 'colour inside' logo on the cov r pa e of this publ c tion in ic te

that it contains colours whic are considere to be us f ul f or the cor e t

understa din of its conte ts Us rs s ould th ref ore print this doc me t using a

colour printer

The International Electrotec nical Commis ion (IEC) draws at ention to the fact that it is

claimed that compl an e with this doc ment may in olve the u e of patents con ernin

a) method for the s p lyin an in tal ation of device-sp cif i fu ctionalties, se Patent

F miy DE10 5 2 6;

b) method an device f or ac es in a fu ctional mod le of automation s stem, se Patent

F miy EP218 418;

c) method an a p ratu to red ce memory req irements for proces control s stem

sof tware a plcation , se Patent Fami y US2 132 218 ;

d) exten ible device o ject model, se Patent Fami y US12/8 3,6 0

IEC takes no p sition con ernin the eviden e, val dity an s o e of this p tent rig t

The holders of these p tent rig ts have as ured the IEC that he/s e is wi in to negotiate

l cen es either fe of c arge or u der re sona le an non-dis riminatory terms an

con ition with ap l cants throu hout the world In this resp ct, the statement of the holder of

this p tent rig t is registered with IEC Information may b o tained f rom:

ISO (www.iso.org/p tents) an IEC (htp:/p tents.iec.c ) maintain on-l ne data b ses of

p tents relevant to their stan ard Users are en ouraged to con ult the data b ses f or the

most up to date information con ernin p tents

FIELD DEVICE INTEGRA TION (FDI) –

Part 103-1: Profiles – PROFIBUS

This p rt of IEC 6 7 9 sp cifies an FDI profie of IEC 6 7 9 for IEC 617 4-1_CP 3/1

(PROFIBUS DP) an IEC 617 4-1_CP3/2 (PROFIBUS PA)

The f ol owin doc ments, in whole or in p rt, are normatively referen ed in this doc ment an

are in isp n a le f or its a pl cation For dated ref eren es, only the edition cited a ples For

u dated referen es, the latest edition of the referen ed doc ment (in lu in any

amen ments) a pl es

IEC 617 4-1, Ind ustrial c mmu ic tion n t works – P rofil es – Part 1: Field bus profil s

IEC 618 4 (al p rts), Fu ct ion bl oc s (F B) for pro es c ntrol a d El ectro ic Devic

Descript ion L n u g (EDDL)

IEC 6 5 1-10 :2 15, OPC u ified arc itect ure – Part 10 : Devic Intera e

IEC 6 7 9-2, Fiel d De ic I ntegrat ion (F DI) – Part 2: FDI Cl ient

NOT 1 IEC 6 7 9-2 is te h ic lid ntic l to FDI-2 2

IEC 6 7 9-4, F ield De ic I ntegrat ion (FDI) – Part 4: F DI P ack ag s

NOT 2 IEC 6 7 9-4 is te h ic ly id ntic l to FDI-2 2

IEC 6 7 9-5, F ield De ic I ntegrat ion (FDI) – Part 5: F DI Information Mod el

NOT 3 IEC 6 7 9-5 is te h ic ly id ntic l to FDI-2 2

IEC 6 7 9-7, F ield De ic I ntegrat ion (FDI) – Part 7 : F DI Commu ic tion Devic s

NOT 4 IEC 6 7 9-7 is te h ic ly id ntic l to FDI-2 2

PI Order No 2.12 :2 0 , Sp cific t ion for PROFIBUS – De ic Descript ion a d De ic

I ntegration – Volume 1: GSD, V5.1, J ly 2 0 : GSD; avai a le at <www.PROFIBUS.com>

—————————

1

PR OFIBUS is th t ra e n me of the n n-profit c n ort ium PR OFIBUS & PR OFINE Int ern t io al This informat io is given

for t he c nv enie c of u ers of t his t ec nic l re ort a d d e n t c n titute a e d rs me t b IEC of th t ra emark old r

or a y f its pro ucts Compla c d e n t re uire u e of t he t ra e n me.Us of t he tra e n me re uire p rmis io of t he

tra e n me h ld r

3 Terms, def initions, abbreviated terms a d acronyms

3.1 Terms a d def initions

For the purp ses of this doc ment, the terms an definition given in IEC 617 4-1,

IEC 618 4, IEC 6 5 1-10 , IEC 6 7 9-4, IEC 6 7 9-5, IEC 6 7 9-7 an PI Order

No 2.12 :2 0 a ply

3.2 Abbre iate terms a d a ronyms

For the purp ses of this doc ment, the f ol owin a breviation a ply:

EDD Electronic Device Des ription

EDDL Electronic Device Des ription L n uage (se IEC 618 4)

GSD General station des ription (se PI Order No 2.12 :2 0 )

I&M Identification an maintenan e f un tion

UIP User Interace Plu -in

UUID Universal y u iq e identif ier (se ISO/IEC 1 5 8)

XML Exten ible mark p lan uage (se REC-xml-2 0 1 2 )

This p rt of IEC 6 7 9 sp cifies content f or the EDD comp nent that is p rt of FDI

Commu ication Pac ages The sp cification content u in EDDL s ntax u es the font

Co r er New The EDDL s ntax is u ed f or method sig ature, varia le, data stru ture an

comp nent declaration

4.2 XML s nta

XML s ntax examples u e the font C ur e N w The XML s ntax is u ed to des rib XML

doc ment s hema

EX MPLE: <xs:s m l Ty e n me=" x m l Ty e >

4.3 Capital zations

The IEC 6 7 9 series u e ca ital zed terms to emphasize that these terms have an FDI

sp cific me nin

Some of these terms u e an acronym as a pref i for example

• FDI Cl ent, or

• FDI Server

Some of these terms are comp u d terms s c as:

• Commu ication Servers, or

• Prof ile Pac age

Parameter names or atributes are con atenated to a sin le term, where the original terms

start in this term with a ca ital leter s c as:

• ProtocolSup ortFi e or

• ProtocolTyp

Parameter names or atributes can also b con tru ted by u in an u ders ore c aracter to

con atenate two or more terms s c as:

• PROFILE_ID or

• Prof ibu _PA_Network

5 Prof ile f or PROFIBUS

This profi e doc ment to the FDI sp cif i ation in IEC 6 7 9 sp cifies the protocol sp cific

ne ded f or FDI Pac ages des ribin Commu ication Servers, Gateway an Devices

For Commu ication Servers this doc ment defines also protocol sp cif i s as these ne d to b

con idered in the Commu ication Servers hosted Information Model

5.2 Catalog profi e

5.2.1 Protocol s pport fi e

5.2.1.1 FDI De ic Pa k ge

Protocol sp cific at ac ments are mentioned in the Pac age Catalog as def i ed in

IEC 6 7 9-5 A commu ication fe ture l st (GSD) fi e ac ordin to PI Order No 2.12 :2 0 is

a man atory atac ment for FDI Device Pac ages re resentin PROFIBUS DP an

PROFIBUS PA devices Ta le 1 sp cifies the p rameters of the ProtocolSup ortFi e in the

FDI Device Pac age

Table 1 – ProtocolSupportFi e f or FDI De ic Pa k ge

So rc Relatio s ip htp:/fdi-c o eratio c m/2 10/relatio s ip/ata hme t-proto ol

Fie ame Ac ordin toPI Ord r No 2.12 :2 0

5.2.1.2 FDI Commu ic tion Pa k ge

A GSD fi e as sp cified in PI Order No 2.12 :2 0 is an o tional at ac ment f or FDI

Commu ication Pac ages re resentin PROFIBUS DP an PROFIBUS PA devices Ta le 2

sp cifies the p rameters of ProtocolSup ortFi e for FDI Commu ication Pac ages

Table 2 – ProtocolSupportFi e f or FDI Communic tion Pa k ge

Co te t Ty e: te tplain

Ro t Name p c : empty

So rc Relatio s ip: htp:/f di-c o eratio c m/2 10/relatio s ip/ata hme t-proto ol

Fie ame: Ac ordin to PI Ord r No 2.12 :2 0

5.2.2 Communic tionProfi e def inition

IEC 6 7 9-4 defines a Commu icationProfi eT en meration typ for the Catalog XML

s hema Ta le 3 def i es the PROFIBUS sp cif i values for this en meration

Table 3 – PROFIBUS Commu ic tionProfi e d finition s hema

"pro b s_d " PR FIBUS D /V0; PR FIBUS D /V1; PR FIBUS D /V2

5.2.3 Profi e de ic

A Profie Pac age s al provide the catalog values for profi e devices, ena l n the FDI Server

to leverage a generic device des ription, if a sp cif i one is not avai a le The definition in

Ta le 4 foc s on catalog content that is ven or in e en ent

Table 4 – Catalog v lue f or profi e de ic s

De ic Mo el – Th alowe pro le id ntifier v lu s (PR FILE ID) are pro id d b

PR FIBUS & PR FINE Intern tio al (PI) PI pro id s a d maintain

a XML f ile (Profie_ID_ a le) c ntainin th a sig me t of

PR FILE ID to profie

It is a aia le at < tp:/ww profib s.c m/IM/Profie_ID_ a le.xml>

Th fie c n b d wnlo d d b a y e gin erin or s rvic to l wh n v r

it is c n e te to th Intern t

NOT More inf ormatio is pro id d in PI Ord r No 3.5 2 (I&M Profie)

a d relate profie d f i itio s are ref ere th rein

Th strin f ormat s al b h x d cimal startin with 0 , e.g ‘0 3D0 ’

5.2.4 Protocol v rsion inf ormation

IEC 6 7 9-4 defines an element typ named Interf aceT f or the Catalog XML s hema The

element typ Interf aceT contain an element named Version whic is s p osed to provide

version inf ormation a out the a pl ed commu ication protocol profi e The value has to fol ow

the IEC 6 7 9-4 def i ed version information s hema defined in the element typ VersionT

Ta le 5 des rib s how to a ply the c r ently k own protocol version defined by the non

-profit con ortium PROFIBUS & PROFINET International The general rule is to a ply the

value “0” for p rts of the version inf ormation ac ordin to IEC 6 7 9-4 that are not u ed in

c r ently k own protocol version

Table 5 – Version mapping e ample

Th c re tly k own PR FIBUS P pro le n mb r is c n id re to pro id major a d min r v rsio

inf ormatio L a in z ro are n t c n id re in v rsio v lu e alu tio sin e o ly th a tu l d cimal

v lu s are rele a t

5.3 As ociating a Pa k ge with a de ic

5.3.1 De ic type ide tific tion mapping

The purp se of device typ identification ma pin is to ena le FDI host s stems to comp re

the s an res lt again t the to olog re resentation in the Information Model FDI host

s stems s al also b ena led to determine the FDI Device Pac age that fits for a device

entry contained in the s an res lt This wi ena le the u er of an FDI host s stem to

s n hronize the Information Model with the actual in tal ation

The Commu ication Server implemented s an service (def i ed in 5.6.1.7) provides the s an

res lt throu h an XML doc ment ( he s hema is defined in Clau e A.5)

The Gateway implemented s an service (defined in 5.6.2.7) provides the s an res lt by

me n of the Information Model that contain data stru tures cre ted f rom EDD content as

sp cified in 5.6.2.7

Common for b th way of presentin the s an res lt is that s an res lts contain device typ

identification an device in tan e identification

FDI host s stems comp rin the actual network to olog config ration again t the to olog

re resentation in the Information Model s al b ena led to han le the fol owin situation :

a) The ph sical Device in tan e identified at a sp cific device ad res is not logical y

present in the Inf ormation Model (as In tan e): Ena le the FDI Host s stem to fin the

a pro riate FDI Device p c age ac ordin to the device catalog e information

b) The phy ical Device in tan e identif ied by the device ad res is logical y present in the

Information Model (as In tan e): Ena le the FDI Host s stem to comp re device typ

inf ormation presented in the s an res lt (se the identif i ation in Clau e A.5) an the

device typ sp cif i inf ormation of the In tan e present in the Information Model

The FDI Device p c age contain device typ identif i ation information that can b comp red

to the s an res lt b sed on the Catalog Sc ema in IEC 6 7 9-4 definin the XML (simple)

element typ s “DeviceModel” an “Man f acturer” Both typ s are u ed in the (complex)

element typ s “Protocol” an “RegDeviceTyp ”

As a res lt of the FDI Pac age de loyment the FDI Pac age inf ormation is then present in the

Information Model as the sp cif ied Fu ctionalGroup Identification containin Ident_Numb r

an Man facturer_ID (se 5.4.3) The Ident_Numb r matc es with the GSD sp cified

—————————

2

Th giv n ta le c n b c n id re to b a e ample o ly sin e this d c me t c n ot f ore e h w f uture

proto ol v rsio s wi b d f i e

Ident_Numb r Man f acturer_ID is sp cified throu h the I&M prof ile defined Ven orID an

DeviceID (se 5.4.3)

The ma pin b twe n dif ferent device identif i ation data sources is des rib d in Ta le 6

Sin e s an res lts provided by the Commu ication Server or Gateway can con ey data that is

prod ced by the device (firmware) the device typ identification ma pin s al b s p orted

by providin cor esp n in data in the FDI Device Pac age contained Catalog an

Inf ormation Model

Table 6 – De ic ide tific tion information mappin

FDI Devic Pa kage Inf ormatio Mo el Commu ic tio Server

pro ided s an re ult

Gateway pro ided s an

IEC 6 7 9-4 en ision a con e t that al ows to determine the comp tibi ty b twe n an FDI

Device Pac age an a Device IEC 6 7 9-4 sp cifies a lfe c cle management proces

b arin on a sin le version information provided for the entire device

NOT PR FIBUS relate s e if i atio s, for e ample PI Ord r No 2.12 :2 0 (GSD) a d PI Ord r No

3.5 2:2 0 (I&M) s lts th d vic ty e re isio into s f tware a d h rdware relate informatio Th GSD s e ifie

th atrib te Hardware_Rele s a d Sof tware_Rele s Th I&M s e if i s H RDWARE REVISION a d

SOF WARE REVISION Hardware_Rele s a d HARDWARE REVISION mu t alwa s matc Software_Rele s

a d SOF WARE REVISION mu t alwa s matc

The go l of 5.3.2 is to des rib the tran lation rules b twe n PROFIBUS related

sp cification , des ribin their way of providin the version information, an the IEC 6 7 9-4

sp cified way of containin the version inf ormation that can b comp red again t the version

re d f rom the device The purp se is to determine the comp tibi ty b twe n an FDI Device

Pac age an a Device Fig re 1 de icts the pro lem

GSD: Hardw are_R ele s

I&M: HAR DW A R E_R EV ISION

GSD: Soft w are_R ele s

I&M: SOF W A R E_R EV ISION

FDI Profie

s ec ife

t ra slat io

IEC

Fig re 1 – Version mappin problem

The firmware of a device implements the data ex han e interf ace whic s al b des rib d by

me n of the FDI Device Pac age content (EDD) A device f irmware that implements the

HARDWARE_REVISION The ac es to these values s al b des rib d in the EDD contained

in the FDI Device Pac age

Firmware modification that aff ect the f irmware implemented data ex han e interace s al b

ref lected in the FDI Device Pac age Su h f irmware an device des ription modification s al

b visible in the SOFTWARE_REVISION an Sof tware Rele se

Hardware related modification s al b ca tured in the HARDWARE_REVISION an

Hardware Rele se Hardware related modification do not neces ari y alway req ire a

f irmware update Th s HARDWARE_REVISION an Hardware Rele se can ot b u ed to

determine comp tibi ty b twe n a device an the FDI Device Pac age But if a hardware

SOFTWARE_REVISION s al b c an ed Hardware Rele se an Sof tware Rele se s al b

c an ed ac ordin ly

The IEC 6 7 9-4 sp cif ies the Catalog s hema an an element DeviceVersion whic is u ed

in the element typ declaration ListOf Sup ortedDeviceVersion The value of the

DeviceVersion s al b comp red to the device provided SOFTWARE_REVISION or the GSD

provided Software Rele se in order to determine the comp tibi ty b twe n an FDI Device

Pac age an a device

The data f ormat for the SOFTWARE_REVISION is a strin whi e the DeviceVersion exp cts

thre n mb rs for major, minor, an revision Therefore the fol owin rules a ply: If the strin

has the f ormat <integer>.<integer>.<integer> this is tran f er ed to major, minor, an revision

(in the same order) <integer> ref eren es to a simple integer n mb r in the strin s c as ‘1’

or ‘12’, not to other re resentation s c as hexadecimal f ormat If <integer>.<integer> is

provided, this is tran f er ed to major an minor an ‘0’ is u ed for revision If only an

<integer> is provided, this is tran f er ed to major an ‘0’ is u ed for minor an revision A

le din c aracter or a le din c aracter an whitesp ce s al b ig ored For a strin in an

other f ormat the revision n mb r s al not b con idered to select the cor ect FDI Pac age

5.4 Information Mod l mapping

5.4.1 ProtocolType def inition

The con e t to derive PROFIBUS DP an PROFIBUS PA sp cif i Network Typ s a pl es to

the protocol typ def i ition

The protocol typ Profibu _DP s al b u ed to identify the PROFIBUS DP commu ication

The typ Prof ibu _DP is a s b typ of the a stract typ ProtocolTyp in IEC 6 5 1-10

Ta le 7 sp cifies the al owed values of the ProtocolTyp atributes f or the protocol typ

The network typ Profibu _PA_Network s al b u ed to bui d PROFIBUS PA network

to ologies The typ Profibu _DP_Network is a s b typ of the a stract typ NetworkTyp in

IEC 6 5 1-10 Ta le 8 sp cifies the al owed values of the ProtocolTyp atributes for the

protocol typ Prof ibu _PA

Table 8 – Protocol type Prof ibus PA

At rib te Value

Brows Name Profib s_P

IsAb tra t Fals

Su ty eof th Proto olTy e d f i e in IEC 6 5 1 10

5.4.2 De ic Type mapping

The DeviceTyp pro erty ma pin of the DeviceTyp node is defined in Ta le 9

Table 9 – De ic Type property mapping

5.4.3 Fun tionalGroup ide tific tion definition

As defined in IEC 6 5 1-10 :2 15, 5.3, e c device re resentation in the FDI Server hosted

Inf ormation Model s al contain a protocol sp cific Fu ctionalGroup named Identification The

Parameters of this Fu ctionalGroup are def i ed for PROFIBUS devices typ s as fol ows:

Table 10 – PROFIBUS De ic Type id ntific tion at ribute

The BaseDataVaria le in tan es, ex e t Ident_Numb r, s al b cre ted f om VARIABLE

declaration with identifiers that cor esp n to the browse names l sted in Ta le 10 The

BaseDataVaria le in tan es Ident_Numb r s al b cre ted fom the GSD fi e atribute

Ident_Numb r

5.5 Top logy eleme ts

5.5.1 Conne tionPoint definition

In order to s p ort dif ferent network to ology en ine rin ne d related to diff erent phy ical

layers u ed by PROFIBUS DP an PROFIBUS PA two dif ferent Con ectionPoint typ s s al

b defined

The Con ectionPoint typ Profibu _DP s al b u ed to p rameterize PROFIBUS DP network

ac es p ints The Con ectionPoint typ Profibu _DP is a s b typ of the a stract typ

Con ectionPointTyp defined in IEC 6 5 1-10 Ta le 1 sp cifies the al owed values of the

Con ectionPoint atributes f or the protocol typ Profibu _DP

Table 1 – Conne tionPoint type f or Profibus DP

At rib te Value

Brows Name Co n ctio Point_Pro b s_D

IsAb tra t Fals

Su ty eof th Co n ctio PointTy e d f i e in IEC 6 5 1 10

The Con ectionPoint typ Prof ibu _DP s al b des rib d by an EDD element contained in a

Commu ication Device related FDI Pac age that can drive a PROFIBUS DP network Actual

Con ectionPoint pro erties are declared by VARIABLE con tru ts group d together in a

The Con ectionPoint typ Profibu _PA s al b u ed to p rameterize PROFIBUS PA network

ac es p ints The Con ectionPoint typ Profibu _PA is a s b typ of the a stract typ

Con ectionPointTyp def i ed in IEC 6 5 1-10 Ta le 12 sp cifies the alowed values of the

Con ectionPoint atributes for the protocol typ Prof ibu _PA

Table 12 – Conne tionPoint type f or Profibus PA

At rib te Value

Brows Name Co n ctio Point_Pro b s_P

IsAb tra t Fals

Su ty eof th Co n ctio PointTy e d f i e in IEC 6 5 1 10

The Pro erty Ad res al owed values are 0 12

The Con ectionPoint typ Profibu _PA s al b des rib d by an EDD element contained in a

Commu ication Device related FDI Pac age that can drive a PROFIBUS PA network Actual

Con ectionPoint pro erties are declared by VARIABLE con tru ts group d together in a

C N E TIO _POIN _A DDR ES , A ddr s ;

}

}

5.5.2 Communic tion De ic d f inition

Ac ordin to IEC 6 7 9-7 eac FDI Commu ication Pac age s al contain an EDD element

des ribin the commu ication device The fol owin EDDL source code in is an example

des ribin a Commu ication Server

C M PONENT P o i u _Com m un c t o _Se ve

LA BE "R el t o b twe n Devi e a d c m m un c t o devi e";

R ELA TI N_TY E C I D_COM PONENT;

Ac ordin to IEC 6 7 9-7 e c FDI Commu ication Pac age s al contain at le st one EDD

element des ribin at le st one commu ication device comp nent The f ol owin EDDL

source code in is an example for a PROFIBUS DP commu ication device:

C M PONENT P o i u _Com m un c t o _Devi e

{

LA BE "PR OFI US c m m un c t o devi e";

CA N_DE E E TR UE;

C A SS FI A TI N NE WOR K_COM PONENT;

C M PONENT_R ELA TI NS { P o i u _Se vi e_Pr vide _R el t o }

B T _OR DER B G_EN IA N;

In an actual commu ication device the value “Con ectionPoint_Profibu _DP” ne d to b

ada ted ac ordin to the s p orted protocol an the related con ection p int definition given

in 5.5 The at ribute BYTE_ORDER value is to b set ac ordin to the protocol

5.5.3 Communic tion s rvic provider definition

Ac ordin to IEC 6 7 9-7 e c FDI Commu ication Pac age s al contain at le st one EDD

element des ribin at le st one commu ication service provider comp nent The fol owin

EDDL source code b low is an example f or a PROFINET IO commu ication service provider

comp nent:

The comp nent referen e (Con ectionPoint_Profibu _DP) cor esp n s to the related

con ection p int def i ition in 5.5 The atribute BYTE_ORDER value is to b set ac ordin to

Ac ordin to IEC 6 7 9-7 e c FDI Commu ication Pac age s al contain at le st one EDD

element des ribin network config ration con traints u in the comp nent con tru t

5.6 Methods

5.6.1 Methods for FDI Communic tion Serv rs

The Commu ication Server contained Information Model s al implement services ac ordin

to method sig atures des rib d in 5.6.1

Ta le 13 provides the des ription of the arg ments

Table 13 – Method Conne t argume ts

Commu ic tio Relatio Id Th arg me t v lu c ntain th n d Id of th Co n ctio Point re re e tin th

c n e tio b twe n a d vic a d a p y ic l n twork whic is dire tly c n e te to

th Commu ic tio Serv r h rdware Th n d Id alows fin in th dire t p re

t-c id relatio

Ad re s Th arg me t n me s al matc with th c re p n in atrib te n me d f i e for

th Co n ctio Point whic is d s rib db ac re p n in ED eleme t s e if i d

in 5.5 Th arg me t v lu h ld th d vic ’s n twork a dre s

Ma ufa turerId Th arg me t s al c re p n to Ba eDataVaria le MA UFA TURER_ID th t is

org niz d in th Fu ctio alGro p Id ntific tio (s e 5.4.3)

Servic Eror 0: OK / e e utio f i is e , c n e tio e ta ls e s c e sf uly

–1: Co n ct Faie / c n ele b c ler

–3: Co n ct Faie / d vic n t f ou d

–4: Co n ct Faie / in ald d vic a dre s

–5: Co n ct Faie / in ald d vic id ntific tio

Ta le 14 provides the des ription of the arg ments

Table 14 – Method Dis on e t argume ts

Commu ic tio Relatio Id Th arg me t v lu c ntain th n d Id of th Co n ctio Point re re e tin th

c n e tio b twe n a d vic a d a p y ic l n twork whic is dire tly c n e te

to th Commu ic tio Serv r h rdware Th n d Id alows fin in th dire t

p re t-c id relatio

Servic Eror 0: OK / dis o n ct f i is e s c e sfuly

–1: Dis o n ct Faie / n e istin c mmu ic tio relatio

–2: Dis o n ct Faie / in ald c mmu ic tio relatio id ntif i r

Ta le 15 provides the des ription of the arg ments

Table 15 – Method Tra sf er argume ts

Commu ic tio Relatio Id Th arg me t v lu c ntain th n d Id of th Co n ctio Point re re e tin th

c n e tio b twe n a d vic a d a p y ic l n twork within th Informatio Mo el

OPERATION Th arg me t v lu in ic te th d ta tra sfer dire tio Alowe v lu s are

“REA ” a d “WRIT ”

n me SLOT Th arg me t v lu s al c me fom th atrib te v lu of COMMA D

– atrib te SLOT of th c re p n in COMMA D th t s al b pro e s d

INDEX Th arg me t n me s al matc with th c re p n in COMMA D – atrib te

n me IN EX Th arg me t v lu s al c me f rom atrib te v lu of COMMA D –

atrib te IN EX of th c re p n in COMMA D th t s al b pro e s d

REQUE T Th arg me t n me s al matc with th c re p n in COMMA D s b-eleme t

n me REQUE T Th b te stre m s bmite tro g th arg me t is cre te f rom

d finitio s pro id d b th REQUE T eleme t of th c re p n in COMMA D

th t s al b pro e s d

n me REPLY Th b te stre m return d b this arg me t a ple to d f i itio s

pro id d b th REPLY eleme t of th c re p n in COMMA D th t s al b

pro e s d

RE PONS _CODE Th arg me t n me s al matc with th COMMA D s b-eleme t n me

RE PONS _CODE Th arg me t v lu c n e s th PROFIBUS s e ific

c mmu ic tio s rvic re p n e b te

Servic Eror 0: OK / e e utio f i is e , RELPLY a d RE PONS _CODE c ntainth re ults

- : Tra sfer Faie / c n ele b c ler

-3: Tra sfer Faie / n e istin c mmu ic tio relatio

-4: Tra sfer Faie / in ald c mmu ic tio relatio id ntifier

-5: Tra sfer Faie / in ald s n Data c nte t

-6: Tra sfer Faie / in ald re eiv Data format

Ta le 16 provides the des ription of the arg ments

Table 16 – Method SetAddre s argume ts

OldAd re s Th arg me t v lu h ld th c re t a dre s of a d vic Alowe v lu s are

0 12

NewAd re s Th arg me t v lu h ld th n w a dre s for a d vic Alowe v lu s are

0 12

–1: SetAd re s Faie / c n ele b c ler

–3: SetAd re s Faie / n t initialz d

–4: SetAd re s Faie / n t c n e te to a n twork

–5: SetAd re s Faie / n d vic fo n re p n in to oldAd re s

–6: SetAd re s Faie / d plc te a dre s eror

–7: SetAd re s Faie / d vic did n t a c pt n w a dre s

–8: SetAd re s Faie / in ald oldAd re s

(in terms of s nta , d ta ty e, d ta f ormat, a d s o )

–9: SetAd re s Faie / in ald n wAd re s

(in terms of s nta , d ta ty e, d ta f ormat, a d s o )

–10: SetAd re s Faie / n t p s ible in statu c n e te

5.6.1.7 Sc n

The method sig ature sp cif ied in IEC 6 7 9-7 a pl es The cor esp n in

to olog ScanRes lt s hema is sp cified in Clau e A.2

5.6.1.8 Re etSc n

The method sig ature sp cified in IEC 6 7 9-7 a pl es

5.6.2 Methods for Gatewa s

The method sig atures defined in 5.6.2 a ply The method s al b implemented in the EDD

element (IEC 6 7 9-4) contained in a Gateway related FDI Pac age containin the

commu ication device def i ition

5.6.2.2 Conne t

Subclau e 5.6.2.2 des rib s the PROFIBUS Gateway sp cif i implementation of the service

Con ect sp cified in IEC 6 7 9-7

Ta le 17 provides the des ription of the arg ments

Table 17 – Conne t s rvic argume ts

Commu ic tio Relatio Id Th arg me t v lu c ntain th n d Id of th Co n ctio Point re re e tin

th c n e tio b twe n a d vic a d a p y ic l n twork whic is dire tly

c n e te to th Commu ic tio Serv r h rdware Th n d Id alows f i din

th dire t p re t-c idrelatio

d f i e f or th Co n ctio Point whic is d s rib d b a c re p n in ED

eleme t s e if i d in 5.5 Th arg me t v lu h ld th d vic ’s n twork

a dre s

Ma uf acturerId Th arg me t s al c re p n to Ba eDataVaria le MA UFA TURER_ID

th t is org niz d in th Fu ctio alGro p Id ntific tio (s e 5.4.3)

Table 18 – Method Tra sf er argume ts

Commu ic tio Relatio Id Th arg me t v lu c ntain th n d Id of th Co n ctio Point re re e tin th

c n e tio b twe n a d vic a d a p y ic l n twork within th Informatio Mo el

OPERATION Th arg me t v lu in ic te th d ta tra sfer dire tio Alowe v lu s are

“REA ” a d “WRIT ”

SLOT Th arg me t n me s al matc with th c re p n in COMMA D – atrib te

n me SLOT Th arg me t v lu s al c me f rom th atrib te v lu of

COMMA D – atrib te SLOT of th c re p n in COMMA D th t s al b

REQUE T Th arg me t n me s al matc with th c re p n in COMMA D s b-eleme t

n me REQUE T Th b te stre m s bmite tro g th arg me t is cre te f rom

d finitio s pro id d b th REQUE T eleme t of th c re p n in COMMA D

th t s al b pro e s d

REPLY Th arg me t n me s al matc with th c re p n in COMMA D s b-eleme t

n me REPLY Th b te stre m return d b this arg me t a ple to d finitio s

pro id d b th REPLY eleme t of th c r e p n in COMMA D th t s al b

pro e s d

RE PONS _CODE Th arg me t n me s al matc with th COMMA D s b-eleme t n me

RE PONS _CODE Th arg me t v lu c n e s th PR FIBUS s e ific

c mmu ic tio s rvic re p n e b te

Servic Id Th s rvic tra s ctio c d e ta ls e th relatio b twe n th s rvic re u st

a d th c re p n in re p n e

Dela ForNe tCal Th v lu s e ifie a d la time in ms to lmit th En Tra sfer in o atio c cle

th t s al n t b fa ter th n s e ifie in th arg me t v lu

Servic Eror 1: OK / f un tio starte a y c ro o sly, re ult h s to b p le with

En Tra sf er

0: OK / e e utio finis e , Re eiv dData c ntain th re ult

–1: Tra sf er Faie / c n ele b c ler

–2: Cal Faie / u k own s rvic ID

–3: Tra sf er Faie / n e istin c mmu ic tio relatio

–4: Tra sf er Faie / in ald c mmu ic tio relatio id ntif i r

–5: Tra sf er Faie / in ald s n Data c nte t

–6: Tra sfer Faie / in ald re eiv Data format

BeginSetA dres (

Ta le 19 provides the des ription of the arg ments

Table 19 – Method SetAddre s argume ts

OldAd re s Th arg me t v lu h ld th c re t a dre s of a d vic Alowe v lu s are 0 12

NewAd re s Th arg me t v lu h ld th n w a dre s f or a d vic Alowe v lu s are 0 12

Servic Id Th s rvic tra s ctio c d e ta ls e th relatio b twe n th s rvic re u st a d

–1: SetAd re s Faie / c n ele b c ler

–2: Cal Faie / u k own s rvic ID

–3: SetAd re s Faie / n t initialz d

–4: SetAd re s Faie / n t c n e te to a n twork

–5: SetAd re s Faie / n d vic fo n re p n in to oldAd re s

–6: SetAd re s Faie / d plc te a dre s eror

–7: SetAd re s Faie / d vic did n t a c pt n w a dre s

–8: SetAd re s Faie / in ald oldAd re s

(in terms of s nta , d ta ty e, d ta f ormat, a d s o )

–9: SetAd re s Faie / in ald n wAd re s

(in terms of s nta , d ta ty e, d ta format, a d s o )

–10: SetAd re s Faie / n t p s ible in statu c n e te

5.6.2.7 Sc n

The method sig ature sp cified in IEC 6 7 9-7 a pl es The PROFIBUS gateway bu ines

logic s al cre te the s an res lt fol owin IEC 6 7 9-7 The f ol owin definition s al b

present in the COMPONENT declaration that hold the definition for a commu ication

device The data stru ture cor esp n s to the data stru ture defined in the XML s hema in

5.2 The SCAN_ IST atribute in ide the COMPONENT declaration s al refer to LIST

The method sig ature sp cified in IEC 6 7 9-7 a pl es The PROFIBUS gateway bu ines

logic s al cre te the s an res lt f ol owin IEC 6 7 9-7 The method ScanNext stores the

res lt into data stru tures des rib d for the method Scan (5.6.2.7)

Annex A

(nor mative)

Topology Scan result schema

The to olog s an res lt s hema sp cified in An ex A des rib s the PROFIBUS sp cific

f ormat Method Scan arg ment t p l gyS a Resu t The XML doc ment content an

stru ture s al cor esp n to the Inf ormation Model desig ed con e t to des rib a to ology

in order to ena le generic matc in b twe n phy ical devices con ected to the network an

the FDI Server hosted Inf ormation Model

The element typ des rib s the complete s an res lt f or a sin le network b cau e of the s an

method that is provided p r in tan e of a "Commu ication Device" whic exists in 1:1 relation

The elements of a Profibu NetworkT typ are des rib d in Ta le A.1

Table A.1 – Eleme ts of ProfibusNetworkT

Co n ctio Point Th Co n ctio Point eleme t h ld th a dre s a d id ntif i atio of th n twork

c n e te d vic th t h s b e f ou d d rin b s s a o eratio s

A 4 Prof ibusConnectionPointT

The XML s hema for a Prof ibu Con ectionPointT typ is:

<xs:c mpl xTyp n me "Pro i usCo ne t on o nt ">

<xs:seque ce

The at ributes of a Profibu Con ectionPointT typ are des rib d in Ta le A.2.

Table A.2 – At ribute of Prof ibusConne tionPointT

Ad re s Th Atrib te v lu h ld th a dre s of th n twork c n e te d vic

The elements of a Prof ibu Con ectionPointT typ are des rib d in Ta le A.3

Table A.3 – Eleme ts of ProfibusConne tionPointT

Id ntif i atio Th eleme t d ta h ld th d vic ty e id ntif i atio d ta Comp re to th Informatio

Mo el (IEC 6 5 1 10 ) th Co n ctio Point d e n t c ntain or ref er to th d vic ty e

id ntif i atio d ta But in ord r to s p ort th FDI h st s stemin fin in th p c a e th t

matc e th c n e te d vic this s h ma a s ciate th d vic ty e id ntif i atio with

th Co n ctio Point

A 5 Prof ibusIde tif icationT

The element content cor esp n s to the "Fu ctionalGroup Identification"

The XML s hema for a Prof ibu IdentificationT typ is:

Table A.4 – At ribute of Prof ibusIde tif ic tionT

Annex B

(nor mative)

Transfer service parameters

Direct Ac es Services sp cified in IEC 6 7 9-2 ena le the User Interf ace Plu -in (UIP) to

directly ex han e data with the device Direct data ex han e me n that data ex han ed

b twe n a device an a UIP may not b ref lected in the Inf ormation Model The IEC 6 7 9-5

defined interace IDirectAc es cor esp n s to the IEC 6 7 9-2 specified Direct Ac es

Services Interf ace IDirectAc es defined f un tion BeginTran fer an En Tran f er ne d to

con ey protocol sp cific inf ormation The protocol sp cif i s s al b ca tured in an XML

doc ment

B.2 sendData

The element des rib d in the f ol owin contain data to b s bmited throu h the

IDirectAc es fu ction BeginTran fer defined arg ment sen Data

The XML s hema for a sen Data element is:

<xs:eleme t name="se dDa a" type "PI:T a sf r e dD t T" >

The element des rib d in the f ol owin contain data that is returned throu h the

IDirectAc es fu ction En Tran fer defined return value

The XML s hema for a receiveData element is:

<xs:e eme t name="re e ve a a" type "PI:Tra sfe Resu tD ta " >

B.4 xsTransf erSendDataT

A complex typ that defines the service p rameter data f ormat that s al b a pl ed to

Tran fer defined arg ment sen Data

The XML s hema for a Tran ferSen DataT typ is:

Table B.1 – At ribute of Tra sferSe dDataT

OPERATION Th atrib te c re p n s to th Tra sfer meth d arg me t OPERATION

SLOT Th atrib te c re p n s to th Tra sfer meth d arg me t SLOT

INDEX Th atrib te c re p n s to th Tra sfer meth d arg me t INDEX

REQUE T Th atrib te c re p n s to th Tra sfer meth d arg me t REQUE T

B.5 Tra sf erResultDataT

A complex type that defines the service p rameter data f ormat that s al b a pl ed to the

Tran f er def i ed receivedData return value

The at ributes of a Tran ferRes ltDataT typ are des rib d in Ta le B.2

Table B.2 – At ribute of Tra sferRe ultDataT

REPLY Th atrib te c re p n s to th Tra sfer meth d arg me t REPLY

RE PONS _CODE Th atrib te c re p n s to th Tra sfer meth d arg me t RE PONS _CODE

B.6 OperationT

A simple typ that defines p s ible service o eration

The XML s hema for an Op rationT en meration typ is:

Bibl ogr aphy

IEC 618 4-3

3

, Fu ct ion bl oc s (FB) for pro es c ntrol a d Ele tro ic De ic Description

L n u g (EDDL) – Part 3: EDDL sy tax a d sema tics

ISO/IEC 1 5 8, I nformat ion tec n lo y – Op n Systems I nterc n e tio – Remot e P ro ed ure

REC-xml-2 0 1 2 , Exten ible Mark p L n uage (XML) 1.0 (Fifth Edition) – W3C

Recommen ation 2 Novemb r 2 0 , avai a le at ht p:/ www.w3.org/TR/xml/

_ _ _ _ _ _

—————————

3

To b p bls e

AVANT-PROPOS 3

INTRODUCTION 3

1 Domaine d'a pl cation 3

2 Réf éren es normatives 3

3 Termes, définition , a réviation et acron mes 4

5.2.1 Fic ier de prise en c arge de protocole 41

5.2.2 Définition de Commu icationProfi e 4

5.2.3 Ap arei de profi 4

5.2.4 Information relatives à la version de protocole 4

5.3 As ociation d'u Paq etage avec u a p rei 4

5.3.1 Ma pin d'dentif i ation d typ d'a p rei 4

5.3.2 Ma pin de révision de typ d'a parei 4

5.4 Ma pin d Modèle d'Information 4

5.4.1 Définition d typ de protocole 4

5.4.2 Ma pin de DeviceTyp 4

5.4.3 Définition d Fu ctionalGroup "Identification" 4

5.5 Eléments de to ologie 4

5.5.1 Définition de Con ectionPoint 4

5.5.2 Définition de la p rei de commu ication 5

5.5.3 Définition d f ournis eur de service de commu ication 51

B.3 x receiveData 6

B.4 x Tran f erSen DataT 6