Tài liệu NP Series Programmable Terminal pptx

OMRON provides all of these and goes further to reduce the TCO, including operating efficiency, by enabling connection of various control devices, easy design work, and the smoothest pos

NP Series Programmable Terminal

* Ordering

information

* Specifications

* Configurations

* Dimensions,

and etc

can be found in our PDF

brochure

Easy Setup with the Cost-effective, Compact HMI

What do you need in a HMI? Display visibility, information capacity, cost effective? OMRON provides all of these and goes further to reduce the TCO, including operating efficiency,

by enabling connection of various control devices, easy design work, and the smoothest possible

connections

NP Series Lineup

Operation Features

Transfer Screens at High Speed via USB Port

The USB interface lets you take full advantage of the computer software environment Transfer screens created on the computer

to the NP Series at high speeds

USB Memory Stick for Program Upload/Download

Screen data can be transferred with a USB memory stick,

eliminating the need to carry a computer to the site

Easier On-site Operation

Models with two different function key layouts are available to meet the needs of your application design The NP Series HMI case

is also available in two different colors: black or silver

Use the Same Equipment Worldwide with Multi-Language Support

The NP Series, screens, and Support Software are supported in English, Chinese, many European languages, and Japanese Also, the NP Series HMI meets international standards so it can be

exported or imported across country borders easily

Hardware Features

Compact Design Reduces the Mounting Work

At 130.1 × 104.8mm (NP3: W × H), this NP Series HMI is small enough to be mounted in the same space as a handful of switches, and it requires only one mounting hole in the control panel You get less work and a less crowded operating section

Install in Most Environments

The front of the panel has IP65 water resistance, allowing the NP Series HMI to be used in environments where mist or splashing cooling water is present

Compact, Yet Plenty of Information

The same data shown on NP5 can also be reflected clearly on an NP3, without compromising the display clarity This proves to show the advanced display capabilities of both NP series HMI

Connection Features

Reduce Connection Design and Onsite Work

For Easy Maintenance without a PC

The NP Series HMI provides an OMRON CP1L/CP1H PLC

Programming Console function, which allows users to check their PLC program and monitor/trigger inputs/outputs

For Easy Development without Programming

NP Series HMI is able to connect to OMRON EJ1 Temperature

Controllers The NP Series can be operated immediately using the sample screens included with the NP-Designer (Support Software)

Reduced Wiring Work

The NP Series HMI is equipped with both a RS-232 port and a

configurable RS-422A/485 port so you can connect to a PLC or Temperature Controller with a single cable You get reduced wiring work and easier maintenance

Multi-vendor is Now Available

Including OMRON and Mitsubishi, support is provided for PLCs from major global manufacturers The NP Series HMI can be used with your current PLC without redesigning the system It doesn’t matter if you use a different PLC manufacturer for each project

Multivendor List:

Manufacturer Series 232C RS- 422A RS- 485

RS-Omron

Host Link

○ ○ C/CPM/CQM PLC

Host Link

○ ○ CS/CJ/CP1/CV/CVM PLC

NT link (1: N) * ○ ○

NT link (1: 1) ○ ○

LG (LS)

Master-K120S/200S ○ Glofa GM6 CNET ○ ○ Master-K CNET ○ ○

Matsushita

Electric Works,

Mitsubishi Electric

Corporation

FX series computer link ○ ○

A series computer link ○

A1SH/A3N/A2ASH CPU port

Q series CPU port ○

Q series computer link ○ ○

Modbus

984 RTU/ASCII (Master) ○ RTU/ASCII Hex Address

RTU/ASCII nW and RTU

RTU/ASCII (Slave) ○

Modicon

TSX Micro (Uni-Telway)

NEZA (Uni-Telway) * ○ ○

Siemens

S7-300 (there to be PC

S7-300 (there is no PC

NULL NULL driver Communication parameter is not

set

* Please refer to NP Host Connection Manual for details

Software Features

NP-Designer

NP Designer is a new software dedicated for NP series models It

has all the advanced features and user friendly interfaces to assist users in programming their ideal screens From basic

lamps/switches to advanced graphic controls, the NP Designer will compliment user’s needs to further illustrate their views of actual conditions at sites

Software Simulation for Easy Troubleshooting

NP Designer is equipped with a TEST Mode which is like a

simulation to enable users the advantage of testing their program without actually connecting to PLC/Host, it also serves as an

excellent troubleshooting tool

Application Examples

Example of Applications that Provides Added Value to Equipment

Example 1:

Example 2:

Example 3:

Example 4:

See Related Products:

Programmable Controller

CP1L

Complete with a standard-feature USB port, for applications with as few as 10 points, to 60 points