The line contains flexible solutions for wall, cabinet and rack mounting.. FMT-1RU Rack Mount FMT-2RU Rack Mount FPL Rack Mount Recommended applications 1.75"H – all front access 19"/2
Trang 1Fiber Optic Panel (FOP)
ADC’s family of Fiber Optic Panel (FOP) products are
used in situations when fiber counts are less than 400
The line contains flexible solutions for wall, cabinet and
rack mounting In the case of rack mounting solutions,
splicing is generally done on frame All products stress
four key elements of fiber cable management: bend
radius protection, cable routing paths, cable and
connector access and physical protection The FOP
family includes: FMT, FPL, FL2000, FL1000 rack mount,
and the FL1000 Wall Box.
Termination & Splice Drawer
Termination & Splice Drawer
FPL Termination Panel w/ Adapters or Pigtails 12 to 144, 288* 12, 24, 48, 144, 2x144*
Termination & Splice Panel w/ Adapters or Pigtails 12 to 144, 288* 12, 24, 48, 144, 2x144* Termination Panel w/ Multifiber Cable 12 to 144, 288* 12, 24, 48, 144, 2x144*
*Using LC small form factor connectors
Cable Lengths (in meters)
8, 16, 23, 31, 39, 46, 54, 61, 77, 92
Note: Non-standard cable lengths also available
Cable Lengths (in feet)
25, 50, 75, 100, 125, 150, 175, 200, 250, 300
Connector Types
SC Angled Polish SC Duplex
SC Ultra Polish Duplex LC
FC Ultra Polish
LC Ultra Polish
LC Angled Polish
Note: Non-standard connector types also available
FPL
Cable Types
IFC Stranded Riser IFC Stranded 62.5/125 µm IFC Ribbon Riser IFC Stranded 50/125 µm OSP Ribbon Armor
OSP Stranded Dielectric FMT 1RU
Trang 2FMT-1RU Rack Mount FMT-2RU Rack Mount FPL Rack Mount Recommended
applications
1.75"H – all front access 19"/23"
all purpose panel; highest density
in 1RU chassis
3.5"H – all front access 19"/23"
all purpose panel; highest density
in 2RU chassis
IDF; small wire closet; high-density termination/splice panel solution; 288-fiber termination/splice in 8.75"H
or 48-fiber termination/splice in 1.75" H (LC connectors)
Number of fibers,
future growth
potential
Flexibility/
ability to grow
Growth should be well planned and limited
Growth should be well planned and limited
Growth should be well planned and limited
Accommodates
on-frame splicing
Accommodates
off-frame splicing
Yes IFC + assembly available Yes IFC + assembly available Yes IFC cable + assembly available
Customer premises
application
Wall mount Yes A wall mount kit is available Yes A wall mount kit is available No
Cabinet mount Yes Panel has option for 40 mm
recess mount
Yes Panel has option for 40 mm recess mount
Not recommended
Mix equipment w/
fiber product?
Use as dedicated
600 mm mounting ETSI compatible mounting option
available
ETSI compatible mounting option available
N/A
Optimum jumper
storage location
Can be configured with storage Can be configured with storage IMP or separate storage panel required
Vertical cable guide VCG available as separate item VCG available as separate item Includes VCG on both sides
Trang 3FMT - 1RU
Termination and Splice Drawer with Adapters or Pigtails
12-Termination/Splice (right splice entry)
24-Termination/Splice (right splice entry)
Catalog Number FMT - 0 0 - A P
Drawer Configuration
TL Term splice with splice tray
(left splice entry)
TR Term splice with splice tray
(right splice entry)
TU Universal entry
(rear entry only)
Lock Type
Number of Ports
12 24
Pigtail or Adapter Type
Chip Style (mini splice tray) Connector and Adapter Type
The termination and splice tray terminates and splices fibers in an all-front-access design This tray
mounts in 19-inch, or 23-inch racks Sliding radius limiters provide cable management for incoming and outgoing fibers Panels loaded with pigtails come with color-coded 900 µm pigtails.
0 N/A
2 Heat shrink
3 Mechanical
0 No lock
1 Lock, key type 1
2 Lock, key type 2
Cable Entry
D Front Entry
J Rear Entry
Multimode
9 SC
Singlemode
2 FC ultra polish
7 SC ultra polish
J SC angled polish
A Adapters only
K Multimode pigtails (62.5/125 µm)
U Singlemode Maxi-Strip pigtails
R Singlemode ribbon pigtails
The information below represents one of ADC’s leading Fiber Optic Panel products, the
FMT 1RU Termination and Splice Drawer This information is representative of ADC’s
easier-to-understand ordering approach See the Fiber Optic Panel catalog for information
on this and other related products.
1 All 483 mm (19)" or 584 mm (23") mounting brackets are reversible and can mount in EIA and WECO racks
Trang 4Web Site: www.adc.com
From North America, Call Toll Free: 1-800-366-3891 • Outside of North America: +1-952-938-8080 Fax: +1-952-917-3237 • For a listing of ADC’s global sales office locations, please refer to our Web site
ADC Telecommunications, Inc., P.O Box 1101, Minneapolis, Minnesota USA 55440-1101 Specifications published here are current as of the date of publication of this document Because we are continuously improving our products, ADC reserves the right to change specifications without prior notice At any time, you may
Fiber Raceway
Solu tions
(FiberGuide®)
Splice Vault
Cable Entrance
Solutions
(FEC)
High-Density
FDF Lineup
Solutions
(NGF, NG3)
Level 3
FL1000 Wall Box Plenum FiberGuide®
Level 2
FL2000 Wall Mount Panel Plenum FiberGuide
Level 1
OMX 600® Fiber Distribution Frame Plenum FiberGuide
VAMs
Customer Premises
FL1000 Wallbox
FiberGuide Express Exit™
Traditional
FDF Lineup
Solutions
(8" FCM, LSX)
Intermediate FDF Solutions
(8" FCM)
FL2000 Panel
FiberGuide®
Flex Tubing
RiserGuide Vertical
FiberGuide
FPL Panel
FMT Panel
Fiber Optic Transport Lineup Fiber Optic Panel Solutions
(FOP)
Fiber Cable Assembly
& Connector Solutions
(FCC)
Value-Added Module (VAM) Solutions
(Monitors, Splitters, WDM, CWDM)
Central Office
24"
12"
12"
12"
6"
6" 6"
6"
6"
6"