ADC’s ruggedized high-density cables providefactory standard guaranteed performance specifications.. They are 100% optically tested and are offered with a variety of optical performance
Trang 1ADC’s ruggedized high-density cables provide
factory standard guaranteed performance
specifications They are 100% optically tested
and are offered with a variety of optical
performance levels
Features:
• 245/900 or 500/900 µm polyester buffer
• Flame retardant polyurethane jacket
• Extremely rugged
• Superior abrasion resistance
• Excellent performance at extreme
temperature
• Compatible with all industry standard
connectors
Applications:
• Military and tactical applications where cables are abused
• Outdoor use where quick retrieval and rough handling are necessary
• Electronic News Gathering environments [ENG]
• Security applications
Trang 2Ruggedized High-Density Cables
Environmental Characteristics:
Storage Temperature -55˚ to 85 ˚C (-67˚ to 185 ˚F)
Operating Temperature -40˚ to 85 ˚C (-40˚ to 185 ˚F)
Installation Temperature -40˚ to 85 ˚C (-40˚ to 185 ˚F)
Specifications
Mechanical Characteristics:
Low Temperature Bend Test EIA-FOTP-37A C (F) Passed @ -40 (-40)
Flame Retardant Polyurethane Outer Jacket
900 µm Polyester Tight Buffer
Dielectric Central Strength Member
Aramid Yarn Strength Member
245 or 500 µm Acrylate Coated Fiber
Simplex Cable
Trang 3Ruggedized High-Density Cables
Construction Characteristics:
Strand Count Single Jacket mm (in) Dual Jacket mm (in)
Optical Performance:
Multimode
Fiber
Maximum Attenuation
@ 850/1300 nm
Typical Attenuation
@ 850/1300 nm
Minimum Bandwidth
@ 850/1300 nm
Core Diameter (µm)
Clad Diameter (µm)
Coat Diameter (µm)
Numerical Aperture
Singlemode
Fiber
@ 1310/1550 nm @ 1310/1550 nm
Mode Field Diameter (µm)
@ 1310 nm @ 1550 nm
Trang 4SPEC SHEET
*Replace XXXor YYY with Fiber Type below:
XXX = Fiber Type
050 = 50/125/500 µm Multimode
100 = 100/140/500 µm Multimode
200 = 200/230/500 µm Multimode
YYY = Fiber Type
010 = Singlemode
062 = 62.5/125/245 µm Multimode