CA 0I Analog Modules - SM 332 analog output Analog Modules - SM 332 analog output tước : es =a : a wt = = h — Overview e Analog outputs e For the connection of analog actuators
Trang 1CA 0I Analog Modules - SM 332 analog output
Analog Modules - SM 332 analog output
tước : es
=a :
a
wt
=
= h
—
Overview
e Analog outputs
e For the connection of analog actuators
Application
Analog output modules can be used to output analog signals from the PLC to the process They are suitable for connecting analog actuators
Function
The analog output modules convert digital signals from the PLC into analog signals for the process
The modules feature the following:
e Resolution from 12 to 15 bit
e Various voltage and current ranges:
The ranges are set independently for each channel using parameterization software
e Interrupt capability:
The module transmits diagnostic alarm messages to the controllers CPU in the event of errors
e Diagnostics:
The module sends detailed diagnostic information to the CPU
Technical specifications
6ES7 332-5HB01-0ABO _ 6ES7 332-5HD01-0ABO _ 6ES7 332-5HF00-0ABO 6ES7 332-7ND02-0AB0 Voltages and currents
Load voltage L+
- Rated value (DC) 24V _24V _24V 24V
Current consumption
@ from load voltage L+ (no load), 135 mA 240 mA 340 mA 290 mA
max
Trang 2CA 01
max
@ Power dissipation, typical
Connection system
@® Requisite front connector
Analog outputs
@ Number of analog outputs
@ Length of cable shielded, max
@® Voltage output, short-circuit
protection
@® Voltage output, short-circuit
current, max
@ Current output, open-circuit
voltage, max
Output ranges, voltage
- Oto10V
- 1to5V
- -10to+10V
Output ranges, current
- Oto20mA
- -20to+20mA
- 4to20mA
Burden resistance (in the nominal
output range)
- at voltage outputs, min
- at voltage outputs,
capacitive load, max
- at current outputs, max
- atcurrent outputs, inductive
load, max
Analog value formation
Integration and conversion
time/triggering per channel
- with over-range (bits incl
sign), max
- Conversion time (per
channel)
Settling time
- for resistive load
for capacitive load
- for inductive load
Error/accuracies
Operational limit in the entire
temperature range
- Relative to the output range,
voltage
- Relative to the output range,
current
Basic error limit (operational limit at
25 °C)
- relative to the output range,
voltage
- relative to the output range,
current
Status information/ interrupts/
diagnostics
@ Applying substitute values
Interrupts
- Diagnostic interrupt
Diagnostics
- Diagnostic information can
be read out
Insulation
@ Insulation tested with
Potentials/ electrical isolation
Analog output functions
- between the channels and
the backplane bus
Dimensions and weight
@ Weight, approx
@® Width
@ Height
@ Depth
3W
20-pin
200m Yes
25 mA
18V
Yes Yes Yes Yes Yes Yes
1kQ
1 UF
500 0
10 mH
12 Bit; +/- 10 V, +/- 20mA, 4 to 20
mA, 1 to 5 V: 11 bits + sign, 0 to 10 V,
0 to 20 mA: 12 bits 0.8 ms
0.2 ms 3.3 ms 0.5 ms; 0.5 ms(1mH); 3.3ms(10mH)
+/- 0,5 % +/- 0,6 %
+/- 0,4 % +/- 0,5 %
Yes; parameterizable Yes; parameterizable Yes
500 V DC
Yes
220g
40 mm
125 mm
120 mm
3W
20-pin
200 m Yes
25 mA
18V
Yes Yes Yes Yes Yes Yes
1kQ
1 UF
500 O
10 mH
12 Bit; +/- 10 V, +/- 20mA, 4 to 20
mA, 1to 5V: 11 bits + sign, 0 to 10
V, 0 to 20 mA: 12 bits 0.8 ms
0.2 ms 3.3 ms _ 0.5 ms; 0.5ms (1mH); 3.3ms (10mH) 0.5 ms; 0.5ms (1mH); 3.3ms (10mH)
+/- 0,5 % +/- 0,6 %
+/- 0,4 % +/- 0,5 %
Yes; parameterizable Yes; parameterizable Yes
500 V DC
Yes
220g
40 mm
125 mm
120 mm
Analog Modules - SM 332 analog output
6W
40-pin
200 m Yes
25 mA
18V
Yes Yes Yes Yes Yes Yes
1kQ
1 UF
500 O
10 mH
12 Bit; +/- 10 V, +/- 20mA, 4 to 20
mA, 1to 5V: 11 bits + sign, 0 to 10
V, 0 to 20 mA: 12 bits 0.8 ms
0.2 ms 3.3 ms
+/- 0,5 % +/- 0,6 %
+/- 0,4 % +/- 0,5 %
Yes; parameterizable Yes; parameterizable Yes
500 V DC
Yes
272g
40 mm
125 mm
120 mm
3W
20-pin 4; clock synchronous operation
200 m Yes
40 mA 18V
Yes Yes Yes Yes Yes Yes
1kQ
1 UF
500 0
1 mH
16 Bit
200 us; in clocked mode 640us
0.2 ms 3.3 ms 0.5 ms
+/- 0,12 % +/- 0,18 %
+/- 0,02 % +/- 0,02 %
Yes; parameterizable Yes
1500 V DC
Yes
220g
40mm
125 mm
120 mm
Trang 3CA 0I Analog Modules - SM 332 analog output