Tài liệu Connector Products pdf

in significant reduction of impedance mismatch throughout the network and improved transmission reliability in digital applications.Features • Designed to exceed the rigorous demands of

75 Ohm BNC Connectors

Connector Products

7/02 • 322

Connector Products

75 Ohm BNC Connectors 1-4 BNC Adapters and Bulkheads 5 PCB Mount BNC Connectors 6 Recessed BNC Panels and Connectors 7-8 Modular BNC Bulkhead Panels 9-10 BNC Tools 11-14 Video ICON®Bulkhead Panels 15-20 Video ICON®F Connector Bulkhead Panels 21 Video ICON®Wall-Mount Panels 22-24

Specifications 26-32 Index 33-34 Table of Contents

in significant reduction of impedance mismatch throughout the network and improved transmission reliability in digital applications.

Features

• Designed to exceed the rigorous demands of today's telecom and broadcast environment including

SMPTE 259, 274, and 292M standards

• Outstanding electrical performance up to 3 GHz

• Gold-plated, locking center conductor

• True 75 Ohm characteristic impedance end-to-end

• Compatible with hex, square, and 12-point crimp tools and select competitive crimp tools and die sets

• Tarnish-resistant, nickel-plated body and bayonet

• Sizes for multiple cable types

• Meets or exceeds MIL-C39012requirements

• True 75 Ohm characteristic impedance through the entire connector

• Outstanding electrical performance to 3 GHz

• Tarnish-resistant, nickel-plated body and bayonet

• Compatible with select competitive crimp tools and die sets

• Sizes for multiple cable types

• Meets or exceeds all requirements in MIL-C-39012

Features

• Designed to exceed the rigorous demands of today's broadcast

environment, including SMPTE 259, 274, and 292M standards

• Gold-plated, locking center conductor

• 625" crimp sleeve for greater pulloff force

• 100 percent guided mating

• Compatible with telco 12-point crimp tools

• Strip lengths common between sizes and types (except for Belden

7731/CommScope 7530, RG11 Cable)

Bulkhead Jack Connectors

Straight BNC Plug Connectors

Right Angle BNC Plug Connectors

Features

• Right angle design alleviates stress associated with bending cable

• Provides increased density

• Improves overall cable management

• Bulk packaging available

• Center conductor pins and crimp sleeves are fully interchangeable

with ADC's straight plugs for same cable type

Features

• Easier, more reliable termination; gold-plated locking center

conductor ensures proper alignment during termination

• 100 percent guided mating

• Exclusive closed-entry contact prevents center conductor damage

w w w a d c c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 7 2 6 - 4 2 6 6

75 Ohm BNC Connectors

Catalog Connector Cable Outer Jacket Diameter Center Conductor Outside Diameter

Number Type Inch Range MM Range AWG Inch Range

Lower Upper Lower Upper (USA) Lower Upper BNC-1 Straight Plug 0.235 0.245 5.97 6.22 20 0.030 0.033

Right Angle Plug

Right Angle Plug

Right Angle Plug

Right Angle Plug

Right Angle Plug

Right Angle Plug

75 Ohm BNC Connectors

Cable Dielectric Outside Diameter Connector Crimp Areas

Inch Range MM Range Hex Flats Distance Center Pin

5.03

1.78

3.81 3.81 5.03

7.11 2.79 5.72

3.56 3.56 1.96 4.70 2.41 4.57 4.57

Inch

0.255 0.255 0.178 0.324 0.324 0.255 0.178 0.278 0.324 0.255 0.324 0.178 0.178 0.255 0.178 0.178 0.278

0.278 0.178 0.278

0.255 0.255 0.178 0.324 0.178 0.278 0.278 0.178

MM

6.48 6.48 4.52 8.23 8.23 6.48 4.52 7.06 8.23 6.48 8.23 4.52 4.52 6.48 4.52 4.52 7.06

7.06 4.52 7.06

6.48 6.48 4.52 8.23 4.52 7.06 7.06 4.52

Inch

.042 042 042 042 042 042 042 042 042 042 042 042 042 042 042 042 042

.068 042 042

.042 042 042 042 042 042 042 042

Catalog Number BNC-1 BNC-2 BNC-3 BNC-4 BNC-5 BNC-6 BNC-7 BNC-8 BNC-9 BNC-10 BNC-11 BNC-12 BNC-13 BNC-15 BNC-16 BNC-19 BNC-20

BNC-25 BNC-26 BNC-27

BNC-RA-1 BNC-RA-2 BNC-RA-3 BNC-RA-4 BNC-RA-7 BNC-RA-8 BNC-BHJ-8 BNC-BHJ-13

Die Cable Type Catalog

Number MM

1.07 WD-1, WD-2, WD-3, WD-5 734, 9259, 1505A, 9100, VPM2000 1.07 WD-1, WD-2, WD-3, WD-5 RG59, 9209, 8279, 8241, VJ59U

1.07 WD-1, WD-2, WD-3, WD-5 734, 9259, 1505A, 9100, VPM2000 1.07 WD-1, WD-2, WD-3, WD-5 RG59, 9209, 8279

1189A

2.29

In addition to the 042" square pin crimp, all connectors listed are compatible with a 12-point method of crimping or 042" hex crimp All ADC BNC connector plugs use the same crimp dimensions

and crimp tools for the same cable type

Bulk packaging in quantities of 100 is available (package includes 100 connector bodies, 100 center pins, and 100 crimp sleeves bagged separately) For bulk packaging add "B" to the end of the catalog number Example: BNC-13B.

.094"

BNC straight adapter

BNC right angle adapter

Bulkhead feedthrough, for 505"/.585" cutout

Bulkhead feedthrough, for 440"/.505" cutout

Bulkhead feedthrough with panel isolation washers

Bulkhead male to female

Catalog Number

BNC-STRT-ADPBNC-RA-ADPBHFT1BHFT-I2BHFT-I1BHFT-MF

Right Angle Adapter

Features

• Improved performance – true 75 Ohm character impedance

• Outstanding electrical performance to 3 GHz

• Bulkhead feedthrough available with or without panel isolation

• Meets the performance requirements of MIL-A-55339 for radio

frequency coaxial adapters

• Gold-plated, closed-entry contact center conductor to prevent

damage during test or mating plug termination

RECOMMENDED PANEL CUTOUT WITH INSULATING WASHER (MAX THICKNESS 250)

7/16-28 UNEF-2A

9/16 HEX

BHFT-I2

Catalog Number

BNC-PC-V1BNC-PC-RTRABNC-PC-STRTBNC-PC-RRABNC-PC-RRA-1

Mounting TemplateHole Cutout

Mounting Template

Mounting TemplateHole Cutout

(6.4) MAX 0.134 "

(3.4)

M2.6 X 45-6H

PCB-PATTERN (TOP VIEW)

7/16-28 UNEF-2A

(1.6) (2)

7/16-28 UNEF-2A

PCB-PATTERN

16-position empty, 1 RU, black - for BHFT-R-X BHFT-PNL-16-BK

16-position empty, 1 RU, gray - for BHFT-R-X BHFT-PNL-16-G

BNC Recessed, 75 Ohm feedthrough BHFT-R-X*

Recessed RCA connector RCA-R-X*

Recessed S-video connector SV-R-X*

* Replace X in catalog number with desired color (G=green, R=red, B=black, BL=blue, W=white, Y=yellow)

RECESSED BNC-BNC (16)

#4 PILOT (2)

PANEL MOUNTING

SV-R-XRCA-R-X

REF 1.050

REF

1.430

REF 1.050

REF 211 REF

.835 REF

REF 2.426 REF 2.848

REF 211 REF

.835 REF

Empty panel, 2 RU - For triax/BNC 3.47" x 19", black TRP-2-BK

Empty panel, 2 RU - For triax/BNC 3.47" x 19", gray TRP-2-G

Blank mounting plate, black TRP-2 TRP-2BLANK-BK

Blank mounting plate, gray TRP-2 TRP-2BLANK-G

Module with (2) 75 Ohm BNC feedthrough, black TRP-2BNCFT-2-BK

Module with (2) 75 Ohm BNC feedthrough, gray TRP-2BNCFT-2-G

Module with (1) 75 Ohm BNC feedthrough, black TRP-2BNCFT-BK

Module with (1) 75 Ohm BNC feedthrough, gray TRP-2BNCFT-G

Mounting plate, 2 RU - For BHFT-R-X-BLACK TRP-2RBNC-BLANK-BK

Mounting plate, 2 RU - For BHFT-R-X-GRAY TRP-2RBNC-BLANK-G

Crimp tool with ergonomic handle for

ADC die sets

Crimp tool with long ergonomic handle

for ADC die sets

BNC insertion tool with 12" handle

BNC insertion tool with 24" handle

Catalog Number

WT-2WT-3BT2000BT2000-24

WD-1-SER* 042"/1.07 mm 068"/1.73 mm 0.255"/6.48 mm 0.324"/8.23 mmWD-2-SER* 042"/1.07 mm 068"/1.73 mm 0.178"/4.52 mm 0.255"/6.48 mm

BNC Insertion ToolBT2000

Die Set Dimensions

Features

• Durable ergonomic handle provides greater comfort

• Fully adjustable for preloading to maintain die set alignment

• Exceptional life, rated for 100,000 crimp cycles

• Available in two handle sizes

• Highest mechanical advantage in the industry, reduces fatigue

during crimping

BNC Die Sets

BNC Crimping Tool

* SER units feature a unique serial number that imprints on

the crimp sleeve This is useful for tracking tooling or

installation quality

Long BNC-5 WD-1 042"/1.07 mm 0.324"/8.23 mm

Ergonomic Handle BNC-6 WD-1, WD-2, WD-3, WD-5 042"/1.07 mm 0.255"/6.48 mm

BNC-7 WD-2 042"/1.07 mm 0.178"/4.52 mmBNC-8 WD-4 042"/1.07 mm 0.278"/7.06 mmBNC-9 WD-1 042"/1.07 mm 0.324"/8.23 mmBNC-10 WD-1, WD-2, WD-3, WD-5 042"/1.07 mm 0.255"/6.48 mmBNC-11 WD-1 042"/1.07 mm 0.324"/8.23 mmBNC-12 WD-2 042"/1.07 mm 0.178"/4.52 mmBNC-13 WD-2 042"/1.07 mm 0.178"/4.52 mmBNC-15 WD-1, WD-2, WD-3, WD-5 042"/1.07 mm 0.255"/6.48 mmBNC-16 WD-2 042"/1.07 mm 0.178"/4.52 mmBNC-17 WD-1 042"/1.07 mm 0.324"/8.23 mmBNC-19 WD-2 042"/1.07 mm 0.178"/4.52 mmBNC-20 WD-4 042"/1.07 mm 0.278"/7.06 mmBNC-22 WD-2 042"/1.07 mm 0.178"/4.52 mmBNC-25 WD-6 042"/1.07 mm 0.384"/9.76 mmBNC-26 WD-3, WD-4 042"/1.07 mm 0.197"/5.00 mmBNC-27 WD-4 042"/1.07 mm 0.278"/7.06 mmBNC-28 WD-2 042"/1.07 mm 0.178"/4.52 mmBNC-29 WD-1 042"/1.07 mm 0.324"/8.23 mmBNC-RA-1 WD-1, WD-2, WD-3, WD-5 042"/1.07 mm 0.255"/6.48 mmBNC-RA-2 WD-1, WD-2, WD-3, WD-5 042"/1.07 mm 0.255"/6.48 mmBNC-RA-3 WD-2 042"/1.07 mm 0.178"/4.52 mmBNC-RA-4 WD-1 042"/1.07 mm 0.324"/8.23 mmBNC-RA-7 WD-3, WD-4 042"/1.07 mm 0.197"/5.00 mm

BNC-RA-8 WD-4 042"/1.07 mm 0.278"/7.06 mmBNC-BHJ-8 WD-4 042"/1.07 mm 0.278"/7.06 mmBNC-BHJ-13 WD-2 042"/1.07 mm 0.178"/4.52 mm

Station Dimensions

O r d e r i n g I n f o r m a t i o n

Hand Crimp Tool

BNC Plug Strip LengthFor BNC-25

Includes stripper cassette,

memory and tool

BNC Type

BNC-3, BNC-7,BNC-12, BNC-13BNC-1, BNC-2,BNC-6, BNC-10 BNC-4, BNC-5,BNC-8, BNC-9, BNC-11,BNC-17

Replacement cutting blades for

the manual Stripper Tool

Memory for Manual

Stripper Tool

Determines how deep each blade

on the stripper cassette will cut

into cable Can be adjusted for

most cable types

Empty Tool Handle

Requires memory and

stripper cassette

Automatic Cable Stripper

Includes Nicad battery pack,

stripper body, AC/DC charger, ABS

plastic carrying case,

BNC-H3BNC-H5

BNC Type

All, except BNC-25

BNC-4, BNC-5,BNC-8, BNC-9,BNC-11BNC-1, BNC-2,BNC-6, BNC-10BNC-3, BNC-7,BNC-12, BNC-13All, except BNC-25

All, except BNC-25

BNC-4BNC-1, BNC-2,BNC-6, BNC-8,BNC-9, BNC-10,BNC-11BNC-6BNC-3, BNC-7,BNC-12, BNC-13

O r d e r i n g I n f o r m a t i o n

Individual Tools

Cable Stripper Tool Kit

• Cable termination tray (LCA-000009)

• Insertion/withdrawal tool for BNC connector

Hex nut for 505" bulkhead connectors

Locking washer for 505" bulkhead connectors

Insulating shoulder washer for 505" bulkhead connectors

Hex nut for 440" bulkhead connectors

Locking washer for 440" bulkhead connectors

Insulating shoulder washer for 440" bulkhead connectors

2.5 mm x 5 mm Phillips pan head screw for BNC-PC-RRA

Catalog Number

TPC-1BTPC-1CHDW-101611BNC-HN440BNC-LW440BNC-IW440SA1089-00

O r d e r i n g I n f o r m a t i o n

Accessories

ADC offers a wide variety of bulkhead panels

featuring our exclusive impedance matched true

75 Ohm bulkhead connector.

Features:

• Rack-mount versions in 19" (48.26 cm) or23" (58.42 cm) 1 RU or 2 RU heights

• Models from 12 to 48 circuits with orwithout cable trays

• Wall-mount systems from 8 to 96 circuits

VI-12-W 12-Circuit 2 RU BNC Bulkhead Panel

VI-16-PTY 16-Circuit 2 RU BNC Bulkhead Panel

VI-116-DES-W 16-Circuit 1 RU BNC Bulkhead Panel

CARDS AND WINDOWS

NOT ATTACHED BY ADC

1 13 2 14 3 15 4 16 5 17 6 18 7 19 8 20 9 21 10 22 11 23 12 24

CARDS AND WINDOWS

CABLE TIE CUTOUT

REAR VIEW ROTATED

SEE DETAIL "A"

BNC TO BNC BULKHEAD (24)

DETAIL "A"

SCALE 3.000 TYP (24) PLACES

BNC TO BNC INSULATOR (REF)

INSULATOR (REF) NUT (REF)

LOCK WASHER (REF)

NUT (REF) LOCK WASHER (REF) INSULATOR (REF)

PANEL (REF)

19" (48.26 cm) Panels

.25" X 44" SLOT (TYP) HORIZONTAL DESIGNATION STRIPS FOR

CARDS AND WINDOWS

SEE DETAIL "A"

.25" X 44" SLOT (4) DESIGNATION STRIP

CABLE TIE CUTOUT

REAR VIEW ROTATED

SEE DETAIL "A"

BNC TO BNC BULKHEAD (12)

DETAIL "A"

SCALE 3.000 TYP (12) PLACES

BNC TO BNC INSULATOR (REF)

INSULATOR (REF) NUT (REF)

LOCK WASHER (REF)

CABLE TIE CUTOUT

19" (48.26 cm) Panels with Cable Tray

7/02

23" (584.2 mm) Panels with Cable Tray

VI-28-BBG

BNC-BLK-36-TR-1U-B

.750" 3.63"

.156 " DIA

FEEDTHRU CONNECTORS (24)

MARKINGS APPEAR ON BOTH SIDES OF PANEL

MARKINGS APPEAR ON BOTH SIDES OF PANEL

1.08 "

5.08 "

.156 " DIA

CABLE TIE BUTTONS

Video ICON VIW-424/408 Wall-Mount Panel Dimensions

VIW-408VIW-424

Video ICON® Wall-Mount Panels

1 RU 1x16 with designation strips, white 16 VI-116-DES-W

2 RU 2x8 with designation strips, putty 16 VI-16-PTY

2 RU 2x10 with designation strips, putty 20 VI-20-PTY

2 RU 2x12, putty 24 VI-24-PTY

2 RU 2x12 with vertical and horizontal rings, black 24 VI-24-VHR-BK

2 RU 2x12 hinged left with rings, white 24 VI-24S

2 RU 2x16 with designation strips, black 32 VI-32-BK

2 RU 2x16 with designation strips, putty 32 VI-32-PTY

2 RU 2x16 with upper and lower designation strips, white 32 VI-32-W

2 RU 2x16 with lower and middle designation strips, white 32 VI-32-DES-W

2 RU 3x16 with designation strips, black 48 VI-48-BK

2 RU 3x16 with designation strips, putty 48 VI-48-PTY

2 RU 3x16 with designation strips, white 48 VI-48-W

2 RU 2x24 with designation strips, black 48 VI-48-19-TT-DES-BK

2 RU 2x24 with designation strips, gray 48 VI-48-19-TT-DES-G

75 Ohm 23" Rack Mount BNC Bulkhead Panels

2 RU 2x18 with designation strips, putty 36 VI-36-DES-PTY

1 RU 2x24, putty 48 VI-148-23-PTY

2 RU 2x24 with upper designation strips, putty 48 BNC-BLK-48-CL

2 RU 2x24 with upper and lower designation strips, black 48 VI-48-23-DES-BK

2 RU 2x24 with upper and middle designation strips, black 48 VI-48-23-TT-DES-BK

2 RU 2x24 with designation strips, gray 48 VI-48-23-TT-DES-G

2 RU 2x24 with designation strips, white 48 VI-48-23-TT-DES-W

75 Ohm 19" Rack Mount BNC Bulkhead Panels with Cable Tray

2 RU 2x6 with cable tray, white 12 VI-12-TR-W

2 RU 2X12 with cable tray, white 24 VI-24-TR-W

1 RU 2x16 with cable tray, black 32 VI-132-TR-BK

1 RU 2x16 with cable tray, white 32 VI-132-TR-W

2 RU 2x16 with cable tray, putty 32 BNC-BLK-32-TR75

75 Ohm 23" Rack Mount BNC Bulkhead Panels with Cable Tray

2 RU 2x14 with cable tray, putty 28 VI-28-BBG

2 RU 2x18 with cable tray, black 36 BNC-BLK-36-TR-1U-B

2 RU 2x18 with cable tray, putty 36 BNC-BLK-36-TR-1U-P

2 RU 2x24 with cable tray, black 48 BNC-BLK-48-TR-2U-B

2 RU 2x24 with cable tray, putty 48 BNC-BLK-48-TR-2U-P

75 Ohm Wall-Mount BNC Bulkhead Panels

1x8 wall mount bulkhead panel 8 VIW-8

3x8 wall mount bulkhead panel 24 VIW-24

24 circuit bulkhead panel 32 VIW-408

64 circuit bulkhead panel 64 VIW-64

72 circuit bulkhead panel 72 VIW-72

96 circuit bulkhead panel 96 VIW-424

96 circuit bulkhead panel 96 VIW-96

75 Ohm F81 Connector Rack Mount Bulkhead Panels

2 RU 1x6 BNC, 1x6 F81 with tray, white 12 VI-12-BNC-F-W

1 RU 19" 1x16 F81 panel with designation strip, putty 16 VI-16F-19-PTY

2 RU 19" 3x16 F81 panel with designation strip, putty 48 VI-48F-19-PTY

2 RU 23" 2x24 panel with designation strip, putty 48 VI-48F-23-PTY

Number of Circuits

O r d e r i n g I n f o r m a t i o n

Catalog Number

200 megohms minimum change

500 cycles minimum

6 lbs minimum

100 lbs minimumDependent on cable size

500 cycles minimumTorque 2.5 in/lb maximum; longitudinal force 3 lbs maximumMIL-C-39012 except 75 Ohm

-40°C to 65°C operating; -55°C to 85°C, non-operating0% to 95%; MIL-STD-202 Method 106

MIL-STD-202 Method 101, Test Condition B

UL 94-VO rated (center conductor insulator)MIL-STD-202 Method 201

MIL-STD-202 Method 215

Tarnish-resistant electroless nickel plating

50 millionths inch gold plating MIL-G-45204 Type 1, Grade C,Class 1; requires 042" crimp station die

Cable Pulloff Force:

Cable Bend and Twist:

-10

-30

-40 -45

.675"

.035"

.0303/.040"

.278"