Tài liệu CREATE A TOTAL ASSEMBLY DRAWING WITH BOM AS A NOTE docx

Herli Surjanhata CREATE A TOTAL ASSEMBLY DRAWING WITH BOM AS A NOTE Select the Create new object icon.. From Insert pull-down menu, select Dimension -> New References Or click.. To ad

ME-430 INTRODUCTION TO COMPUTER AIDED DESIGN CREATING ASSEMBLY DRAWING OF CHAIN LINK

Pro/ENGINEER Wildfire 2.0

Dr Herli Surjanhata

CREATE A TOTAL ASSEMBLY DRAWING WITH BOM AS A NOTE

Select the Create new object icon Choose Drawing from the New dialog box Enter the name roller_chain Click OK button

Accept ROLLER_CHAIN.ASM as default model, and click Browse button to pick

b.frm format

Click OK button

Create FRONT, TOP, RIGHT-SIDE, and ISOMETRIC views of the roller chain assembly as shown below

Under Model view names, select FRONT from the list Click Apply

Select Scale, then choose

Select View Display Set the Display style to

No Hidden Click OK

Be sure to unlock the view movement

Add the projection views for TOP and RIGHT SIDE views as shown in the next page Also create ISOMETRIC view with scale 2.5 at the upper right corner of the drawing

Double click the TOP view, select View Display

Set the Display style to No Hidden

From Insert pull-down menu, select

Dimension -> New References

Or click Pick the upper left corner and upper right corner points Middle-click the location above the front view Select

Horizontal for the type of displayed dimension

Add two more dimensions as shown below

To add a Bill of Materials (BOM) to the drawing, create a BOM file in Assembly mode

by choosing

From the Pro/ENGINEER Info down menu, select Bill of

pull-Materials

Click the OK button

Bom Report: ROLLER_CHAIN information window appears in the graphics area

Click the Sash control bar to return back to drawing mode

To Add a BOM to a Drawing as a Note

Click or choose pull-down menu

Insert -> Note.Click here!

Click File under Note Types menu

Click Make Note Select a location for the note (BOM) to appear e.g upper left corner of drawing area

In the file browser, change the Type to All Files (*) and pick

roller_chain.bom

Click the Open button

The BOM appears on the drawing

Note: When adding a BOM to a drawing as a note, justify the note using Default or Left If you use Center or Right, the system might format the BOM incorrectly on the drawing

To change the font type and text height of the note, select pull-down menu,

Format -> Text Style Pick Box to choose the entire text

OK

Click the Apply and OK

button

If necessary, move the views by unlocking it first – click to unlock the view

Add the necessaryNotein the title block.

To move the text note, click the text, and move it to desired location

Save the drawing

10

CREATE A DRAWING FOR ROLLER LINK WITH BOM

The Sheets command in the DRAWING menu can be used to create multiple sheets drawings To Add a new drawing sheet to the end of the drawing,

From Insert pull down menu, select

Sheet The second sheet is added

Right-click the drawing area, and select

Create a general view of the roller_link assembly Click ,

When prompted with the message for the CENTER POINT for the drawing view Pick

an appropriate location near the middle of inside drawing

Select View States

Check Explode components in view

Select View Display Set the Display style

to No Hidden Click OK

Click Repaint the Screen icon

Create a TABLE for drawing BOM

From Table pull down menu, select

Hit Enter on a blank line to finish the column definition

Now enter the row heights,

Hit Enter on a blank line to finish the row definition

Merge the columns in the first row to create a title block for the table Select

From Table pull down menu, select

Merge Cells

Rows & Cols

Pick the first and last column entries in the first row of the table

Click OK

Double click the FIRST

(header) row cell

The Note Properties dialog box opens

Enter ROLLER LINK BOM

Click Text Style tab

Change the Font to for example Blueprint MT

Change the justification of the text as follows

Click OK

Create the column headings in the SECOND row Select,

Double click the FIRST cell of the second row

The Note Properties dialog box opens Enter the text INDEX

Click Text Style tab

Make sure you hit Enter twice to finish entering text in particular cell The table should appear as shown below

Create the Repeat Region Repeat Regions automatically add text and expand downward as the model changes

Select a cell in the third row you want

to designate as a repeat region

From the TABLE pull down menu, select

Select -> Row

The row is highlighted

With the row still selected, click Add Repeat Region from the right mouse button shortcut menu The row is designated as a repeat region

Double click the first cell in the

THIRD row, and Report Symbol

dialog box opens

Select rpt… in the Report Symbol dialog box, then pick

index

Double click the second cell in the THIRD row … etc

Enter the following sequences from the REPORT SYMBOL dialog box into each

Create the BOM

From the TABLE pull down menu, select

Repeat Region

In the TBL REGIONS menu, select

Update Tables

Note: Select Switch Syms if only report symbols are shown

The table contains duplicated entities, to combine these in the TBL REGIONS

To modify the width of the column and row – if necessary,

Pick one of cells inside the table Right-click to activate the right mouse button short cut menu, and select Height and Width

Change the values as needed

From TABLE pull down menu, select,

BOM Balloon –> Set Region -> With Qty

Click the region in the BOM Table

Add notes in the title block,

Click or from Insert pull-down menu, select

Note -> … -> Make Note

Pick the location in the title block where you want to place the note

Enter NOTE: New Jersey Institute of Technology <Enter>

Enter NOTE: <Enter>

Continue to create the note as required

Done/Return to end the note creation

Note: Use left-mouse button to select the text, and move the note to proper location

CREATE A DRAWING FOR PIN LINK WITH BOM

Repeat the same procedure as shown above to add the next sheet, and create the assembly drawing of pin link as shown below

CREATE A DRAWING FOR PIN LINK PLATE

Create a detailed drawing of pin_link_plate as shown below