Tài liệu IPX Troubleshooting 3 doc

It has been found that workstations connected to the Singapore router cannot communicate with users connected to the Capetown router and vice versa.. Step 1 Define the problem you are e

Lab 10.3.5.2: IPX Troubleshooting 3

Fa0/0 ABC1.0.1.0

Fa0/0 ABC3.0.3.0 Fa0/0 ABC4.0.4.0

S0/0 ABC2.0.2.0

S0/0 ABC2.0.2.2 S0/0 ABC2.0.2.1

Frame Relay

Atlas 550 ABC2

1/1

1/2 2/1

DLCI 16

DLCI 18 PVC

DLCI 16

PVC

DLCI 17

SanJose3

Objective

Utilize a systematic approach to troubleshooting an IPX network

Scenario

You have been asked to check out the SanJose3, Capetown, and Singapore routers It has been found that workstations connected to the Singapore router cannot communicate with users connected to the Capetown router and vice versa The frame relay core is running IPX EIGRP and IPX RIP is running on the LAN It is your job to troubleshoot and solve the problem

Lab Tasks

Build the network according to the diagram above and load the appropriate

‘broken’ configuration files to each router Save the configurations and reload each router Clock rates have been applied to all serial interfaces

Confirm connectivity by performing ipx pings between routers

Step 1

Define the problem you are experiencing

Step 2

Gather relevant facts about the situation at hand Upon examining the router, what factual information can you obtain from the router?

Step 3

Examine the facts you have just listed Based on your observations, list some potential causes of the problem

Step 4

Formulate an action plan to solve this problem

Step 5

Implement your action plan and attempt to fix the problem Log all your

changes

Step 6

What were the results of your implementation? Did it fix the problem? List your results and observations below

Step 7

If your solution did not fix the problem, repeat the process If your solution did fix the problem, document your fix below