Features: Complete NEBS compliant system Racks • High-density solution for best use of available space • Extensive labelling for accurate record keeping and easy circuit identificatio
Trang 1w w w a d c c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1
In today’s complex and competitive communications environment, carriers must develop a network that can deliver high bandwidth data, voice and video services while maintaining standards of flexibility, reliability and scalability ADC’s infrastructure products establish a cohesive, easy-to-operate environment in which to add, retire and upgrade equipment/technologies as required by the carrier’s business model and growth plans.
The new ADC Carrier Data Products (CDP) solutions provide a location for the management
of both copper and fiber Ethernet cables and ensure optimal performance and adherence to traditional central office standards of operational excellence Designed to maximize available office space while maintaining manageability, the products provide a centralized point for cross-connecting, testing and patching of Ethernet circuits, promote efficient daily operations and reduce downtime during upgrades.
Features:
Complete NEBS compliant system
Racks
• High-density solution for best use of available space
• Extensive labelling for accurate record keeping and easy circuit identification
• Designed to ensure optimal performance and adherence to central office standards
• 23-inch mounting
• Standard CO putty white
Category 5e and Category 6 patch panels with angled adapter design
• Install easily for faster service turn-up
• Available with wide variety of adapter types to support widest range of equipment
• RJ45 to RJ45
• RJ45 to LSA-PLUS® punchdown connection technology (wire can be terminated with either
a KRONE® or 110 tool)
• RJ45 to RJ21
Carrier Glide System
• Reduces cable tension
• Manages copper and fiber Ethernet cables from switches and patch panels
• Wide cable openings allow for 25-pair cable and cable bundles
Trang 2Drop-In Bays
ADC’s Carrier Data Product (CDP) start-up, expansion, and empty drop-in bays all include 7'x 23" racks and feature cable management troughs with carrier glide The easy single-part ordering system for both the bay and glide system eliminates the need for placing multiple orders and simplifies the ordering process In addition, ADC’s CDP drop-in bays are preconfigured, which saves valuable installation time.
Loaded start-up bay
Includes:
• 7' x 23" rack
• Upper and lower cable management troughs
• (30) Category 6 RJ45 to RJ45 Ethernet patch panels
• (2) Glide unequal flange adapter brackets
• (1) 8" Glide system and (1) 10" Glide system with spools
• (2) end guards
ADC-BC6NNRR-30G
Empty start-up bay
Includes:
• 7' x 23" rack
• Upper and lower cable management troughs
• (2) Glide unequal flange adapter brackets
• (1) 8" Glide system and (1) 10" Glide system with spools
• (2) end guards
ADC-BESNNNN-00G
Empty expansion bay
Includes:
• 7' x 23" rack
• Upper and lower cable management troughs
• (2) Glide unequal flange adapter brackets
• (1) 10" Glide system with spools
ADC-BEENNNN-00G
O r d e r i n g I n f o r m a t i o n
Trang 3Patch Panels
Front View
Rear View Cat 6 Angled Patch Panel (ADCPP246R23AP)
Front View
Rear View Cat 5e Flat Patch Panel (ADCPP245800PTEL)
Category 6 panel
24-port
48-port
ADCPP486R23AP
Category 5e panel
24-port
24-port
24-port, non-angled design
48-port
RJ45 RJ45 RJ45 RJ45
RJ45 Punchdown RJ21 RJ45
ADCPP245E23AP ADCPP24AC5ET23AP ADCPP245800PTEL ADCPP485E23AP
T1 panel
28-port
28-port
28-port
28-port
RJ48X RJ48C RJ48X RJ48X
Wire-wrap Wire-wrap 64-pin Wire-wrap and 64-pin, with front monitor jack
MPP-GDXBA1 MPP-GDXBA2 MPP-DX2BA0 MPP-N28BA1
T1 wall mount panel, 14-port RJ45 Side Connector (no rear
connector): Wire-wrap
MPP-CXZXF4
O r d e r i n g I n f o r m a t i o n
Features
• NEBS compliant
• Angled design for best cable management
• 23-inch mounting
• Putty white
• Additional labels for easy circuit identification
• Universal wiring label for easy termination
of either 568A/B
Trang 4Cable Management
Carrier Glide System
Carrier Glide System with front and rear cable management fingers,
and front cable management spools No rear cable management spools
(ordered separately); putty white
Carrier Glide System with front only cable management fingers and front
cable management spools No rear cable management spools (ordered
separately); putty white
6" width
cable management spools No rear cable management spools
ADCCMSF-06P
Unequal flange (UEF) adapter brackets, putty white
One REQUIRED for each set of Carrier Glide System ordered when
mounting on UEF rack Not required for channel racks
ADCCMIVBUFASP
Glide stabilizers
Recommended only when not supported by end guard
O r d e r i n g I n f o r m a t i o n
Features
• Integrated front, rear, horizontal and vertical cable management
• Patented rib cage design eliminates horizontal support trays and bars
• Built-in bend radius protection ensures network integrity
• Designed for quick and easy moves, adds and changes
• Used for single rack or as inter-rack unit
Trang 5Cable Management
21129-A
NETWORK RACK
NETWORK RACK PWUEF-7ERN
GLIDE SUPPORT BRACKET (ADCCMVESB06-P shown) ADCCMVESBO8-P (USED WITH 8” GLIDE) ADCCMBESB10-P (USED WITH 10” GLLIDE)
UNEQUAL FLANGE ADAPTER PLATE ADCCMVIBUFASP
REAR GUARD BOX RAC-OXO439
BASE FILLER PANEL ADCBFNW-08P (8” GLIDE) ADCBFNW-10P (10” GLIDE)
GLIDE RIB CAGE ADCCMS-08P (8” GLIDE)
ADCCMS-10P (10” GLIDE)
Carrier Glide System
Trang 6Cable Management
Carrier Glide System – Additional Hardware
Glide Base Filler Panels
Glide base filler panels are used to extend the 8- and 10-inch Glide Cable Management System (GCMS) with both front and rear cable management, filling the space between two rack frames It helps prevent damage to cables by giving the base of the bay lineup a clean and even surface.
End Guard
The end guard is a protection mechanism that provides stabilization as well as signifies the end of a lineup The end guard may be mounted to any unequal flange (UEF) or network style bay is shipped with an upper and lower bracket.
Ordering information follows on next page.
ADCBFNW-XXP End guard as installed next to Glide System
Trang 7Cable Management
Base fillers (see drawing on page 5)
End guards
Rear guard box extension Add to rack when 15" footprint is required RAC-0X0439
Cable troughs, putty white
O r d e r i n g I n f o r m a t i o n
Trang 8Category 6 Patch Cords
Patch Cords for Category 6 Patch Panels
These impedance matched patch cords exceed all performance requirements for Category 6 The plug
is designed with integrated strain relievers that prevent the cable from moving at the termination point when the cable is flexed, safeguarding circuit integrity and guaranteeing maximum performance The strain relievers also ensure that proper bend radii are maintained throughout the network.
RJ45 plug to RJ45 plug, T568B Quantity: 1 Blue 6645-2-781-XX
O r d e r i n g I n f o r m a t i o n
*Replace XX with:
04 = 4'
07 = 7'
10 = 10'
15 = 15'
25 = 25'
50 = 50'
Contact ADC for additional cable colors
Category 6 patch cord
Features
• Exceeds TIA/EIA Category 6 requirements
• Copper conductors in the cable pairs are stranded for superior flexibility and compacted to a near-round shape for optimum signal strength
• Durable design to be in operation beyond 20-year product warranty
• Impedance matched patch cord for maximum throughput
• Flexible strain relief boot maintains proper bend radius to ensure peak performance
• Up to 32 percent smaller outer diameter than other patch cords
• UL 1863 listed and Category 6 performance verified
Trang 9Category 5e Patch Cords
Patch Cords for Category 5e Patch Panels
These patch cords implement ADC’s AirES® technology The use of air increases signal strength and improves transmission speed, while reducing crosstalk As a result this allows the conductor and insulation diameter to be dramatically reduced improving flexability, reducing weight and maximizing tight tray, conduit and duct space.
Category 5e patch cord
Features
• Impedance matched patch cord for maximum throughput
• Patented AirES technology
• Exceeds TIA/EIA Category 5e requirements
• Up to 28% smaller outer diameter than other patch cords
• Enhanced flexibility, which notably improves handling and circuit tracing
• Improved electrical transmission
• Strain relief boot maintains proper bend radius to maintain reliability and ensure peak performance
• UL 1863 listed and Category 5e performance verified
Ordering information follows on the next page.
Trang 10Category 5e Patch Cords
RJ45 plug to RJ45 plug, T568B, wired straight through
Quantity: 1
RJ45 plug to RJ45 plug, T568A, wired straight through
Quantity: 1
RJ45 plug to RJ45 plug, crossover wired
Quantity: 1
O r d e r i n g I n f o r m a t i o n
*Replace XX with: 04 = 4' 10 = 10' 25 = 25'
07 = 7' 15 = 15' 50 = 50'
Trang 12Web Site: www.adc.com
From North America, Call Toll Free: 1-800-366-3891 • Outside of North America: +1-952-938-8080 Fax: +1-952-917-3237 • For a listing of ADC’s global sales office locations, please refer to our web site
ADC Telecommunications, Inc., P.O Box 1101, Minneapolis, Minnesota USA 55440-1101 Specifications published here are current as of the date of publication of this document Because we are continuously improving our products, ADC reserves the right to change specifications without prior notice At any time, you may verify product specifications by contacting our headquarters office in Minneapolis ADC Telecommunications, Inc views its patent portfolio as an important corporate asset and vigorously enforces its patents Products orfeatures contained herein may be covered by one or more U.S or foreign patents An Equal Opportunity Employer