Tài liệu Manual Classroom Setup Guide ppt

Install and configure Windows 2000 Server To speed up this installation, run SMARTDrive 5.0 or higher smartdrv.exe, a utility that ships with Microsoft MS-DOS® version 6.22, prior to ru

Manual Classroom Setup

Guide

Course Number: 1910A

Part Number: X05-91046

Released: 10/2000

Information in this document is subject to change without notice The names of companies, products, people, characters, and/or data mentioned herein are fictitious and are in no way intended

to represent any real individual, company, product, or event, unless otherwise noted Complying with all applicable copyright laws is the responsibility of the user No part of this document may

be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express written permission of Microsoft Corporation If, however, your only means of access is electronic, permission to print one copy is hereby granted

Microsoft may have patents, patent applications, trademarks, copyrights, or other intellectual property rights covering subject matter in this document Except as expressly provided in any written license agreement from Microsoft, the furnishing of this document does not give you any license to these patents, trademarks, copyrights, or other intellectual property

 2000 Microsoft Corporation All rights reserved

Microsoft, Active Directory, ActiveX, BackOffice, BizTalk, FrontPage, Microsoft Press, MSDN, MS-DOS, PowerPoint, Visio, Visual Basic, Visual C++, Visual FoxPro, Visual InterDev, Visual J++, Visual SourceSafe, Visual Studio, Win32, Windows, and Windows NT are either registered trademarks or trademarks of Microsoft Corporation in the U.S.A and/or other countries/regions Other product and company names mentioned herein may be the trademarks of their respective owners

Program Managers: Rhy Mednick, Susie Parrent

Instructional Designer: Susie Parrent

Subject Matter Experts: David Chesnut, Sam Gill (TechnoWiz), Michel Pahud

Media Management: David Mahlmann

Editing Manager: Lynette Skinner

Editor: Mick Alberts, Jennifer Linn

Production Manager: Miracle Davis

Print Coordinators: Linda Lu Cannon (Write Stuff), Marlene Lambert (Online Training

Solutions, Inc.)

Build Coordinator: Eric Wagoner

Graphic Artist: Scott Serna

Test Lead: Eric Myers

Manufacturing Manager: John Williams

Group Product Manager: Juan Fernando Rivera

Lead Product Manager, System Services and Infrastructure: Edward Dudenhoefer

Manufacturing Manager: Rick Terek

Operations Coordinator: John Williams

Manufacturing Support: Laura King; Kathy Hershey

Lead Product Manager, Release Management: Bo Galford

Group Manager, Courseware Infrastructure: David Bramble

General Manager: Robert Stewart

Course Number: 1910A

Part Number: X05-91046

Released: 10/2000

Contents

Classroom Requirements 1

Instructor Computer Hardware 1

Student Computer Hardware 1

Required Software 2

Classroom Configuration 3

Setup Instructions 3

Before You Begin 3

Computer Setup 3

Installation Procedures 4

THISPAGE INTENTIONALLY LEFT BLANK

Classroom Requirements

This course requires a classroom with a minimum of one computer for the instructor and one for each student Before class begins, install and configure all computers by using the following information and instructions

Instructor Computer Hardware

The following hardware is the minimum required for the instructor computer:

! Pentium II 300

! PCI 2.1 bus

! 256 megabytes (MB) of RAM

! 4-gigabyte (GB) hard disk

! 256-kilobyte (KB) L2 cache

! DVD or 12X CD-ROM drive

! Network adapter

! 4-MB video adapter

! Super VGA (SVGA) monitor (17 inch)

! Microsoft® Mouse or compatible pointing device

! Sound card with speakers

! Internet access

! Projection display device that supports SVGA 800x600, 256 colors

Student Computer Hardware

The following hardware is the minimum required for each student computer:

! Pentium 166

! 256 MB of RAM

! 4-GB hard disk

! 256-KB L2 cache

! DVD or 12X CD-ROM drive

! Network adapter

! 4-MB video adapter

! SVGA monitor (15 inch minimum; 17 inch recommended)

! Microsoft Mouse or compatible pointing device

! Sound card with headphones or speakers recommended

! Internet access

2 Manual Classroom Setup Guide

Required Software

Except where noted as instructor computer only, the following software is required for all classroom computers Follow the sequence of installing software and completing configuration tasks

! Microsoft Windows® 2000 Server

• Active Directory™ Services

• Message Queuing

! Microsoft Windows 2000 Service Pack 1

! Microsoft Visual Studio® 6.0, Enterprise Edition

• Microsoft Visual C++® 6.0

• Microsoft Visual Basic® 6.0

! Microsoft MSDN® Library

• Full Text Search Index

• Visual C++ Documentation

• Visual Basic Documentation

• Visual Studio Shared Documentation

! Visual Studio Service Pack 4

! Microsoft SQL Server™ 7.0, Standard Edition

! SQL Server 7.0 Service Pack 2

! Microsoft Visio®, Professional Edition

! Microsoft Word 2000 Service Release 1 (SR-1)

! Market Purchasing (the sample application distributed with the course)

! Microsoft PowerPoint® 97 and courseware fonts (instructor computer only)

Classroom Configuration

The classroom is configured in a multiple domain model in which each computer is promoted to domain controller Use computer names, domain names, and network basic input/output system (NetBIOS) names from the table

If a Dynamic Host Configuration Protocol (DHCP) server is available, use it to assign Internet Protocol (IP) addresses Otherwise, use the IP addresses provided

Instructor 131.107.2.200 Domain.com

StudentXX 131.107.2.2XX DomainXX.com

All computers are assigned the Subnet Mask of 255.255.255.0

Configure each computer as a domain controller

Replace XX with a unique number for each student computer, starting

with 01 for the first student computer

Setup Instructions

Use the following procedures to prepare each computer for class

Before You Begin

You will need to do the following:

! Read through all setup procedures

! Make sure that you have the Trainer Materials compact disc that is provided with the course materials

Estimated time to set up the classroom: 7 hours

Computer Setup

Use the following instructions to set up the classroom computers

! Set up the hardware

1 Set up the hardware according to the manufacturer’s instructions (Refer to the hardware requirements.)

2 Configure the hard disk as follows:

• Drive C: 4 GB formatted as FAT32 (The drive will be converted to NTFS as part of the Windows 2000 Server installation.)

Note

4 Manual Classroom Setup Guide

Installation Procedures

! Install and configure Windows 2000 Server

To speed up this installation, run SMARTDrive 5.0 or higher (smartdrv.exe), a utility that ships with Microsoft MS-DOS® version 6.22, prior

to running the Windows 2000 Server setup program

1 From a DOS prompt, type CD drive letter:\i386\winnt.exe and press

ENTER

2 When the Welcome to Setup screen is displayed, press Enter to set up

Windows 2000

3 Follow the prompts to install Windows 2000 Server Use the parameters provided in the following table Respond to all other installation prompts with defaults or with information appropriate for your computer or location

When this information is required Use

Partition Install to the primary DOS partition.

File system Use NTFS

Allow Windows 2000 installer to convert

the drive to NTFS from FAT

Regional settings Use a setting appropriate to your locale Personalize your software Enter your name and your organization’s

name

Licensing modes Per server Five concurrent connections Computer name “Instructor” for the instructor computer

“StudentXX” for the student computers.

Administrator password Leave blank

Windows 2000 components Add Message Queuing

Add Domain Name Service (DNS), which is found in Networking Services

Date and time settings Use the correct date and time

Networking settings Click Custom Settings, and then click

Internet Protocol (TCP/IP)

Click Properties

IP address See the table above, in “Classroom

Configuration.”

Subnet mask 255.255.255.0 Preferred DNS server Set this to the IP address for this computer Workgroup and computer domain Click OK Click Next

The default selection is No, this computer

is not on a network, or is in a network without a domain, using WORKGROUP

Click Next

Completing Windows 2000 setup wizard

Click Finish

Tip

! Install Windows 2000 Service Pack 1

• Run the service pack setup executable file Proceed with the installation of the service pack Use default settings at every dialog box

! Configure display settings

1 Right-click the desktop, click Properties, and then click the Settings tab

2 Use the slider to configure the screen area to at least 800 by 600 pixels

! Configure Active Directory

1 In the Configure Your Server window, click Active Directory

2 Scroll to the bottom of the window and click Start the Active Directory Wizard Use this table to complete the Active Directory wizard

Welcome to the Active Directory

Installation Wizard

Domain Controller Type Domain controller for a new domain Click Next

Create Tree or Child Domain Create a new domain tree Click Next

Create or Join Forest Create a new forest of domain trees Click Next

New Domain Name Enter a full DNS name of

Domain.com for the instructor

computer or DomainXX.com for the

student computers

Click Next

NetBIOS Domain Name Domain NetBIOS Name:

DOMAINXX

Click Next

Database and Log Locations C:\WINNT\NTDS Click Next

Shared System Volume C:\WINNT\SYSVOL Click Next

Active Directory Installation Wizard (Message) The wizard cannot

contact the DNS server that handles

“domain.com” to determine if it supports dynamic update

Click OK

Configure DNS Yes, install and configure DNS on

this computer (recommended)

Click Next

Permissions Permissions compatible with

pre-Windows 2000 servers

Click Next

Directory Service Restore Mode

Administrator Password

Password fields are blank Click Next

Summary Click Next

Completing the Active Directory

Installation Wizard

Click Finish

Active Directory Installation Wizard Click Restart Now

3 When the computer restarts, log on as Administrator

6 Manual Classroom Setup Guide

! Install Message Queuing

1 In the Configure Your Server dialog box, click Finish Setup

2 In Control Panel, open the Add/Remove Programs icon

3 In the Add/Remove Programs dialog box, click Add/Remove Windows Components

4 Click Message Queuing Services, and then click Next and use all default

settings

5 Close the Add/Remove Programs dialog box

! Install SQL Server 7.0 Standard Edition

1 Run the SQL Server 7.0 setup executable

2 In the opening dialog box, select Install SQL Server 7.0 Components

3 In the Install SQL Server 7.0 Components dialog box, select the Database Server - Standard Edition install option

4 In the Select Install Method dialog box, accept the default Local Install option, and then click Next

5 In the Welcome dialog box, click Next

6 In the Software License Agreement dialog box, click Yes if you accept the

terms of the license agreement

7 In the User Information dialog box, verify that the information is correct, and then click Next

8 In the Setup dialog box, enter a valid CD key and then click OK In the Setup product ID confirmation message box, click OK again

9 In the Setup Type dialog box, click Next for a typical installation to the

default installation locations

10 In the Services Accounts dialog box, accept the default settings, leave the password blank, and then click Next

11 In the Start Copying Files dialog box, click Next

12 In the Licensing dialog box, if you accept the license agreement, click Per seat, and then click Continue

13 In the Per Seat Licensing dialog box, click I agree that if you agree to the licensing agreement, and then click OK

14 In the Setup Complete dialog box, click Finish

15 Exit the SQL Server 7.0 setup application

! Apply SQL Server 7.0 Service Pack 2

• Run the service pack setup executable file Proceed with the installation of the service pack Use default settings in every dialog box

! Install Microsoft Visual Studio 6.0, Enterprise Edition

Setup summary: Install Visual C++ 6.0, Microsoft Visual Basic 6.0, Visual Modeler, and MSDNLibrary

1 Run setup.exe to begin the installation process

2 In the Visual Studio Enterprise Edition dialog box, click Next

3 In the End User License Agreement dialog box, click I accept the agreement if you accept the licensing terms, and then click Next

4 In the Product Number and User ID dialog box, enter a valid product ID number, and then click Next

5 In the Visual Studio Enterprise Edition setup options dialog box, click Next

6 In the Choose Common Install Folder dialog box, accept the default and click Next

7 In the Visual Studio 6.0 Enterprise Setup welcome dialog box, click Continue

8 In the Product Identification Confirmation message box, click OK

9 In the Visual Studio 6.0 Enterprise - Custom dialog box, do the following:

a Deselect Microsoft Visual FoxPro® 6.0, Microsoft Visual InterDev® 6.0, and Microsoft Visual SourceSafe™ 6.0, so that they will not be installed

b Click Continue The other components required to run the course

(Visual Basic 6.0, Visual C++ 6.0, and Enterprise Tools) are installed by default

10 In the Setup Environment Variables dialog box, click OK

11 In the Windows NT Debug Symbols message box, click OK

12 In the Visual Studio 6.0 Enterprise - Restart Windows dialog box, click Restart Windows

13 In the Install MSDN dialog box, click Next

14 In the Path dialog box, enter the path to the setup program for MSDN Library, and then click OK

15 In the MSDN Library setup dialog box, click Continue, and then click

OK in the Product ID box

16 In the License Agreement dialog box, click I Agree if you agree to the

licensing terms

17 In the MSDN Library installation choices dialog box, click Custom

18 In the MSDN Library options dialog box, select the following to be installed and then click Continue

a Full Text Search Index

b Visual Basic Documentation

c Visual C++ Documentation

d Visual Studio Shared Documentation

8 Manual Classroom Setup Guide

19 In the MSDN Desktop Shortcut dialog box, click Yes

20 In the MSDN Installation Success message box, click OK

21 In the Other Client Tools dialog box, click Next

22 In the Server Setups dialog box, click Next

23 Register Visual Studio at this time, if appropriate

! Apply Visual Studio 6.0 Service Pack 4

• Run the setup executable file for the service pack Follow the default options for installing the service pack

! Install Visio 2000 Professional Edition

1 Run the setup executable file, and then click Install Visio 2000 Professional Edition

2 In the Microsoft Windows System Updater dialog box, click Update

3 In the End User License Agreement dialog box, click Accept if you agree

to the terms

4 When prompted to restart your computer, click OK

5 After initialization, in the Welcome to the Visio Installation Manager window, click Next

6 In the End-User License Agreement dialog box, click I Accept and then click Next if you agree to the terms

7 In the Setup Type dialog box, click Next Typical Install is the default

option

8 In the Setup Preview dialog box click Next

9 Register Visio in a manner appropriate to your situation

10 Click to clear the Run Microsoft Visio Now check box, and then click Finish

! Install Microsoft Word 2000 (Service Release 1 (SR-1) version of the product)

• Run the setup executable file Proceed with the installation using default settings

If you already have Microsoft Word 2000 installed, you can download and install the Microsoft Office SR-1 update from the following Internet location: http://www.microsoft.com/office/details/SR1.htm

Note