KRONE 10Gb/s Graded Index Multimode Fiber850 nm Laser-Optimised 50 µm Multimode Fiber for 10Gb/s Application over 300m KRONE 10 Gb/s multimode fibers are produced by the proprietary Pla
Trang 1KRONE 10Gb/s Graded Index Multimode Fiber
850 nm Laser-Optimised 50 µm Multimode Fiber for 10Gb/s Application over 300m
KRONE 10 Gb/s multimode fibers are produced by the proprietary
Plasma-activated Chemical Vapour Deposition process (PCVD), acknowledged worldwide
as offering the best core profile accuracy in multimode Fiber.
850nm/1300nm
3.0 / 1.0 3.0 / 1.0 3.0 / 1.0 3.0 / 1.0 3.0 / 1.0
1310nm/1550nm
0.4 / 0.3
850nm/1300nm
200* / 500* 200* / 500* 500* / 500* 500* / 500* 2000* / 500*
1310nm/1550nm
N / A
Core
62.5 / 125 Multimode 62.5 / 125 Enhanced MM
50 / 125 Multimode
50 / 125 Enhanced MM
50 / 125 Ultra MM
62.5 / 125 Multimode
Single- Mode
850nm/1300nm
3.5 / 1.5 3.5 / 1.5 3.5 / 1.5 3.5 / 1.5 3.5 / 1.5
1310nm/1550nm
1.0 / 1.0
Guaranteed Min Bandwidth (MHz-km)
Typical Attenuation (dB/km)
Max Attenuation (dB/km)
* Bandwidth specified by overfilled launch (OFL)
** Bandwidth specified by laser-based launch Specifications:
* 10 Gigabit Ethernet distance guarantees at 1300nm are achieved via four 3.125 Gbps channels
* multiplexed with WWDM technology (10GBASE-LX4)
Guaranteed Ethernet Transmission Performance:
850nm/1300nm
300m / 550m 500m / 1km 550m / 550m 750m / 2km 900m / 550m
1310nm/1550nm
5km / N/A
850nm/1300nm
35m / 300m*
65m / 300m*
86m /300m*
110m / 300m*
300m / 300m*
1310nm/1550nm
10km / 40km
Core
62.5 / 125 Multimode 62.5 / 125 Enhanced MM
50 / 125 Multimode
50 / 125 Enhanced MM
50 / 125 Ultra MM
62.5 / 125 Multimode
Single- Mode
850nm/1300nm
300m / 2km 300m / 2km 300m / 2km 300m / 2km 300m / 2km
1310nm/1550nm
2km / N/A
Gigabit Ethernet
1 Gbps
Gigabit Ethernet
1 Gbps
Fast Ethernet
100 Mbps
Features
Applications
Local Area Networks
(LAN) backbones
e.g.(10GBASE-SX)
Storage Area Networks
(SAN)
Central Office Connections
Each fiber tested to
specifications after cabling
All Multimode fiber types
exceed Gigabit Ethernet
industry standard
(IEEE 802.3z)
Utra 50 µm fiber is
laser-optimized for
300 meter 10 Gbps applications
(IEEE 802.3ae)
Trang 2Features of KRONE multimode Fibers.
As OM-3 type MMF, KRONE fully supports 850 nm (SX) serial 10 Gb/s applications over 300 metres An effective modal bandwidth of
2000 MHz.km at 850 nm under laser launch is ensured by means of 850 nm DMD specification
The overfilled launch (OFL) bandwidth of the KRONE multimode Fiber at 850 nm is ≥ 1500 MHz.km; at 1300 nm the OFL bandwidth is ≥ 500 MHz.km This OFL bandwidth performance gives strong support to legacy applications KRONE multimode Fiber offers a smooth,
low-cost migration path for premises backbone cabling from 10 Mb/s up to 10 Gb/s over 300 m
KRONE multimode Fibers offer another cost-saving advantage by eliminating the need to use expensive mode-conditioning patch cords
for 1300 nm laser based systems such as 1000BASE-LX
KRONE multimode Fibers are equipped with an excellent microbending sensitivity reducing coating, which results in easy cabling and installation
Thanks to the special bandwidth performance of the KRONE multimode Fiber, a broad range of legacy and new 10 Gb/s applications can be
supported Together with other multimode Fiber products produced by KRONE (e.g the 1 Gb/s HiCap class), this range of multimode products
offers end users the best possible optimisation of their networks in the most flexible way For an overview of all KRONE's multimode products and the applications supported, reference is made to our Application Note Five
The KRONE multimode Fiber fulfils the requirements of TIA/EIA-492AAAC, ISO/IEC 11801 OM-3 type and type A1a.2 of IEC 60793-2-10 (in
preparation)
Application in other LAN systems.
62.5/125MM
62.5/125 Enhanced MM
50/125 MM
50/125 Enhanced MM
50/125 Ultra MM
Single Mode
Ordering Information:
062 62E 050 50E 50U 010
* Suffixes are used as the last three characters of typical cable part numbers
* Example: 6012INHCBC62E, 6006PTHBKO010, 7006LZHIOC50U
xxx (2-72) Fiber Outside Plant Cable, Non-Armored, Single
xxx (2-72) Fiber Outside Plant Cable, Non-Armored, Dual Jacket
xxx (2-72) Fiber Outside Plant Cable, Armored
xxx (2-24) Fiber Indoor/Outdoor LSZH Cable, Non-Armored, Riser (OFNR)
xxx (2-24) Fiber Indoor/Outdoor LSZH Cable, Non-Armored Breakout, Riser (OFNR)
xxx (2-24) Fiber Indoor/Outdoor LSZH Cable, Armored Breakout, Riser (OFCR)
Part Number
NxxxLTSDUCyyy NxxxLTDDUCyyy NxxxLTDARMyyy 7xxxLZHIOCyyy 7xxxLZHIOByyy 7xxxLZHBKAyyy
xxx (4-72) Fiber Distribution Cable, Riser (OFNR)
xxx (4-72) Fiber Distribution Cable, Plenum (OFNP)
xxx (4-24) Fiber 2.4mm Breakout Cable, Riser (OFNR)
xxx (4-24) Fiber 2.4mm Breakout Cable, Plenum (OFNP)
2-Fiber Distribution Cable, Riser (OFNR)
2-Fiber Distribution Cable, Plenum (OFNP)
Part Number
6xxxINHCBCyyy 6xxxPTHCBCyyy 6xxxINHBKOyyy 6xxxPTHBKOyyy 6002INHFDDyyy 6002PTSFDDyyy
KRONE Asia Offices - For your Local Contact
KRONE China
Tel: +86 21 5442 3680
Fax: +86 21 5442 2711
E-mail: webmaster@krone.com.cn
KRONE Hong Kong
Tel: +852 2865 4888
Fax: +852 2861 1444
E-mail: marketing@krone.com.hk
KRONE Indonesia
Tel: +62 21 520 0231
Fax: +62 21 522 1312
E-mail: agus.kumala@krone.co.id
KRONE Korea
Tel: +82 2 565 4844 Fax: +82 2 555 5779
E-mail: marketing@krone.com.hk
KRONE Philippines
Tel: +632 848 9901 Fax: +632 848 9904
E-mail: larry.cunanan@krone.com
KRONE Singapore & Malaysia
Tel: +65 6 538 8628 Fax: +65 6 538 8636
E-mail: kfe.mktg@krone.com
KRONE Taiwan
Tel: +886 2 2579 5895 Fax: +886 2 2577 4157
E-mail: marketing@krone.com.hk
KRONE Thailand
Tel: +662 637 8301 Fax: +662 637 8306
E-mail: prakit.homnan@krone.com
KRONE Vietnam
Tel: +84 4 934 3968 Ext:145-6 Fax: +84 4 934 3956
E-mail: da.ngo@krone.com
Outdoor and Indoor / Outdoor Cable:
Description
Indoor Cable:
Description
KHK/NOV 2002
http://www.kroneasia.com