Midspan Power-over-Ethernet Controller ADC’s TrueNet®Midspan Power-over-Ethernet PoE Controller provides a flexible way to power IP telephony and other applications over a local area net
Trang 1Midspan Power-over-Ethernet Controller
ADC’s TrueNet®Midspan Power-over-Ethernet
(PoE) Controller provides a flexible way to
power IP telephony and other applications over
a local area network The IEEE
802.3af-compliant power source ensures reliability of
service for any number of Ethernet devices
such as VoIP telephones, wireless access points
and security cameras ADC’s Midspan PoE
Controller eliminates the need for installation
of local power at the device, saving time and
money.
ADC’s patent-pending design also offers a
modular SNMP slot and dual power supply slot
that allow for easy future upgrades For
example, a non-SNMP enabled chassis can
easily be upgraded by inserting the SNMP card
at a later date, deferring up-front costs.
Additionally, a single power supply chassis can
be upgraded to dual redundancy at a future
date should the circuits become critical These
upgrades can be performed without ever
interrupting the data or power.
Features:
• Dual compatibility with IEEE 802.3af and earlier devices
• Detects device presence and transmits appropriate power, achieving dual compliance
to IEEE 802.af and Cisco’s legacy in-line powering standards
• Delivers up to 15.4 watts of power on all ports; redundant power available
• Modular SNMP and power supplies
• Up to five panels can be daisy-chained and controlled via one CPU card and a single IP address
Application and Benefits:
• Utilizes existing infrastructure
- Standard cables and RJ45 connectors
• Offers less expensive, faster, simpler way to set
up remote network devices
- Wi-Fi access points
- IP security cameras
- VoIP phones
• Provides easier remote access and management
- Monitor the entire network and operation of individual devices
- Remotely turn off or reboot network devices
• Ensures greater safety
- 48V, 15.4W, 400mA
- 1500Vrms port isolation
w w w a d c c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1
Trang 2ADC Telecommunications, Inc., P.O Box 1101, Minneapolis, Minnesota USA 55440-1101 Specifications published here are current as of the date of publication of this document Because we are continuously improving our products, ADC reserves the right to change specifications without prior notice At any time, you may verify product specifications by contacting our headquarters office in Minneapolis ADC Telecommunications, Inc views its patent portfolio as an important corporate asset and vigorously enforces its patents Products or features contained herein may be covered by one or more U.S or foreign patents An Equal Opportunity Employer
101599AE 10/05 Revision © 2004, 2005 ADC Telecommunications, Inc All Rights Reserved
Web Site: www.adc.com
From North America, Call Toll Free: 1-800-366-3891 • Outside of North America: +1-952-938-8080 Fax: +1-952-917-3237 • For a listing of ADC’s global sales office locations, please refer to our web site
Specifications
MECHANICAL
ELECTRICAL
device detected, but not powered Power LED—Green = Power OK, Red = Fan Failure or Overtemp
ENVIRONMENTAL AND SAFETY
O r d e r i n g I n f o r m a t i o n
Dual Compliance (802.3af and Legacy Cisco)
24-port midspan controller 802.3af and Cisco compliant PWR-24ACS 16-port midspan controller 802.3af and Cisco compliant PWR-16ACS 8-port midspan controller 802.3af and Cisco compliant PWR-08ACS 24-port midspan controller 802.3af and Cisco compliant, with N+1 redundant power PWR-24AC2S 16-port midspan controller 802.3af and Cisco compliant, with N+1 redundant power PWR-16AC2S 8-port midspan controller 802.3af and Cisco compliant, with N+1 redundant power PWR-08AC2S
Accessories
SNMP module (Mounts in all chassis) PWR-M
Redundant power supply (Mounts in all chassis) PWR-PS
Note: All chassis accept our modular SNMP module and redundant power supplies