OmniReach™ FTTX Solutions Fiber Distribution Hubs

Features and Benefits• Feeder input panel - Connectorized feeder input allows for plug-in of the connectorized splitter input directly to feeder input port connectors without disturbing

Trang 1

2nd Edition

Trang 2

Table of Contents

Introduction 3

Features and Benefits 4

The ADC Parking Lot 4

Centralized Splitting 5

Splitter Modules 6

Fiber Distribution Hubs – Stubbed Cable Configurations 7

Small Cabinets – Up to 288 distribution fibers ACE92V 8

ACE102V 9

ACE132V 10

Medium Cabinets – Up to 576 distribution fibers ACE142V 11

ACE152V 12

ACE204V 13

ACE214V 14

Large Cabinets – Up to 864 distribution fibers ACE304V 15

Fiber Distribution Hubs – Integrated Splice Configurations 16

Small Cabinets – Up to 360 distribution fibers ACE132S 17

ACE142S 18

Medium Cabinets – Up to 576 distribution fibers ACE204S 19

ACE214S 20

Large Cabinets – Up to 864 distribution fibers ACE304S 21

Pad Mounting 22

Ground Spacers/Risers 23

Fiberglass Ground Mounting – Hand Holes 24

Accessories 25

Complete Splitter Listing 27

Trang 3

ADC’s OmniReach FTTX Solutions are the industry’s first infrastructure solutions designed from theground up to meet the unique requirements of FTTX networks Designed for operational efficiencyand scalability, OmniReach solutions simplify FTTX network installation, maintenance and manage-ment from the central office/headend to the outside plant.

Servicing neighborhoods and housing developments from 32 to 864 homes, ADC’s Fiber DistributionHubs (FDHs) enable high optical line terminal (OLT) efficiency, and physical layer access to fibers with-

in the feeder and distribution network The FDHs incorporate four time-tested elements that havelong impacted reliability, flexibility and operational costs within the central office:

• Bend radius protection

• Intuitive cable routing

• Easy fiber/connector access

Trang 4

Features and Benefits

• Feeder input panel - Connectorized feeder input allows for plug-in of the connectorized splitter input

directly to feeder input port

connectors without disturbing adjacent circuits

of excess fiber while providing positive fiberbend radius control

access to connectors and prevents 90 degreebends on connector boots

distribution bulkhead panels

pro-trude only 48” from the ground, while pole mountversions protrude less than 16” from the pole

in the cabinet ensures accurate and consistentcable routing and speeds service turn-up or rou-tine maintenance

The ADC Parking Lot

All splitter connectors are preloaded into the parking lot

• Safe storage for all connectors prior to use

• NEW 8-pack has all connectors pre-loaded into the

correct position Simply plug in

• Dust cap remains in place until service is turned up

• Easy fiber identification

• Easy installer access to connectors and fibers

• Each splitter output pigtail is uniquely numbered

Trang 5

• Provides easy testing and troubleshooting access It is very difficult to use an optical time-domainreflectometer (OTDR) to test multiple splitters unless the network is built with each fiber character-ized to enable the OTDR to recognize each individual fiber run.

• Minimizes signal loss by eliminating extra splices and/or connectors from the distribution network.Each time an optical signal encounters a network component or connection, such as a splitter, itsuffers a certain degree of signal loss Therefore, when splitters are cascaded together, loss willoccur at each device The combined loss effect can reduce the distance a signal can travel, impos-ing distance limitations on fiber runs

• Reducing the number of components in the network decreases the number of opportunities for failure

AT

SPLICE POINT

SPLICE POINT DISTRIBUTION CABLE (~72 FIBERS)

DROP CABLE (TYP) ONT (TYP)

SPLICE POINT

FIBER FRAME SPLICEPOINT 1550

FDT 32

2 1 FEEDER

CABLE (1-N FIBERS)

3 4 2 1

FIBER FRAME

FIBER CROSS-CONNECT

WDM VAM MODULE

PACKET OLT

VIDEO OLT

CLASS

5 SWITCH RF CONTENT

SITE

INTERNET

1550

1310 1490

Splitter Chassis

1x32 Optical

Feeder OSP Cable from C/O

Splice Tray

Optional Splice Tray

Factory Connectors Splitter Module

Factory Terminated Connectors on FDT Distribution Cable

Distribution Cable

Splitter Connector Parking Lot

Factory Connectors Splitter Module

Schematic Diagram of PON Architecture - Central Office to Outside Plant

Inside the FDH

Trang 6

High Performance

1x32 16.90dB 16.50dB 2.00dB >55dB >60dB 0.3dB

Trang 7

Stubbed Cable Configurations

One of the options when deploying Omnireach FDH cabinets is to install the cabinet with stub cables,which can be ordered for both feeder and distribution When ordering cabinets provisioned with stubs,the splicing operation ensures optimal performance in the field When technicians are only required to

do sheath openings and perform fusion splicing—single strands or mass fusion—significant laborhours and dollars are saved over the scope of the project

Features

• Pole mount, pad mount or sleeve mount

• Pre-terminated with OSP cable, loose tube or ribbon, armored or dielectric

• Angled or flat polish connectors

• Uses ADC high-performance connectors

• Uses 8-pack parking lot

• 1x4, 1x8, 1x16 or 1x32 splitters can be preinstalled or ordered separately

Small

ACE92V 32”x 24”x 13” 32-144 all front ground, 4 top or

(81.27 x 60.96 x 33.02 cm) homes pole bottomACE102V 39”x 24”x 16” 32-216 all front ground, 8 top or

(99.06 x 60.96 x 40.64 cm) homes* pole bottomACE132V 45”x 24”x 16” 32-288 all front ground 10 bottom

(114.3 x 60.96 x 40.64 cm) homes

Medium

ACE142V 45”x 24”x 18” 32-360 front and ground 12 bottom

(121.92 x 60.96 x 40.64 cm) homes backACE152V 48”x 30”x 16” 32-432 all front ground, 14 top or

(121.92 x 76.20 x 40.64 cm) homes pole bottomACE204V 51”x 30”x 22” 32-576 front and ground 18 bottom

(129.54 x 76.20 x 55.88 cm) homes backACE214V 48”x 42”x 24” 32-576 front and ground 18 bottom

Trang 8

Stubbed Cable Configurations – Small Cabinets

ACE92V

Features

• All front access

• Available with pre-terminated OSP cable

• Pole-mounted option available

• Supports up to 144 distribution fibers

• Supports up to 2 pre-loaded splitter modules

• Includes 4 splitter slots

Number of 72-port panels loaded (1 to 2)

Splitter type loaded*

Number of splitters loaded (1 to 2)

If more than 2 splitters are required,

order separately

Feeder/distribution cable type

G Single armor loose tube

J Dielectric loose tube

T Dielectric ribbon

L Armored ribbon

Input panel/cable size

0 None

1 12 fiber input panel

Feeder cable splice type

2 Heat shrink splicing

M Mechanical splicing

C Connectorized input

* Other splitter types available Contact your ADC representative for more information or see page 27

of this catalog For additional information, consult the ADC OmniReach Optical Splitter ModuleBrochure (#1276346)

Trang 9

ACE102V

Features

• Supports up to 216 distribution fibers*

Splitter type loaded**

order separately

T Dielectric ribbon

L Armored ribbon

0 None

2 24-fiber input panel

* In pole-mounted applications, the ACE102V can accommodate 288 distribution fibers

**Other splitter types available Contact your ADC representative for more information or see page 27

Mounting Options

A 25-foot stub

B 100-foot stub

Trang 10

ACE132V

Features

Feeder/distribution cable length

A 25-foot stub

B 100-foot stub

order separately

T Dielectric ribbon

L Armored ribbon

0 None

Trang 11

Stubbed Cable Configurations – Medium Cabinets

ACE142V

Features

• Front and back access

A 25-foot stub

B 100-foot stub

order separately

T Dielectric ribbon

L Armored ribbon

0 None

Rear View (doors removed for clarity)

Trang 12

ACE152V

Features

• Parking lot accommodates up to 4 splitter modules

order separately

T Dielectric ribbon

L Armored ribbon

0 None

Mounting Options

A 25-foot stub

B 100-foot stub

Trang 13

ACE204V

Features

- Cable and splitters in back of cabinet

- All service turn-up on front

order separately

T Dielectric ribbon

L Armored ribbon

0 None

Trang 14

ACE214V

Features

- Cable and splitters in back of cabinet

- All service turn-up on front

A 25-foot stub

B 100-foot stub

order separately

T Dielectric ribbon

L Armored ribbon

0 None

of this catalog For additional information, consult the ADC OmniReach Optical Splitter Module

Trang 15

Stubbed Cable Configurations – Large Cabinets

ACE304V

Features

- Cable and splitter input in back of cabinet

order separately

T Dielectric ribbon

L Armored ribbon

0 None

Aerial View

Trang 16

Integrated Splice Configurations

Another option when deploying Omnireach FDHs is to install the cabinet and perform the splicingwithin the cabinet The integrated splice configuration allows for all work to be done within the FDH.This approach allows the feeder and distribution cables, as well as the splitter and distribution inter-connect, to be above ground and easily accessible

Features

• Pad mount or sleeve mount

• Lockable in-cabinet splicing for feeder and distribution cables

• Angled or flat polish connectors

• Uses ADC high-performance connectors

• Parking lot available with terminators

• 1x4, 1x8, 1x16, or 1x32 splitters can be preinstalled or ordered separately

• Distribution and feeder cables can be spliced inside cabinet, eliminating the need for additionalsplice closures

Small

ACE132S 45”x 24”x 16” 32-216 all front ground 8 bottom

(114.3 x 60.96 x 40.64 cm) homesACE142S 45”x 24”x 18” 32-360 front and ground 12 bottom

(121.92 x 60.96 x 40.64 cm) homes back

Medium

ACE204S 51”x 30”x 22” 32-576 front and ground 18 bottom

(129.54 x 76.2 x 55.88 cm) homes backACE214S 48”x 42”x 24” 32-576 front and ground 18 bottom

(121.92 x 106.68 x 60.96 cm) homes back

Large

ACE304S 48”x 52”x 24” 32-864 front and ground 28 bottom

(121.92 x 132.08 x 60.96 cm) homes back

Trang 17

Integrated Splice Configurations – Small Cabinets

ACE132S

Features

• Available with ribbon or stranded pigtails

• Distribution and feeder cables can be spliced

inside cabinet, eliminating the need for additionalsplice closures

Feeder/distribution pigtail

3 Pigtail option

order separately

Feeder/distribution pigtail type

R 12 fiber ribbon

U 12 fiber bundles - stranded

Feeder/distribution cable splice type

2 Heat shrink fusion

M Mechanical/mass fusion

Splitter input type

C Connectorized input 12-fiber

D Connectorized input 24-fiber

3

Tiêu đề	OmniReach™ FTTX Solutions Fiber Distribution Hubs
Thể loại	Product catalog
Năm xuất bản	2005

Định dạng
Số trang	28
Dung lượng	1,55 MB