Issue1 - Draft 01/07/04 Form: E104 1of 2 SUBJECT TO CHANGE D ESCRIPTION : H IGHBAND 25 C ATEGORY 6 M ODULE PRODUCT DESCRIPTION AND APPLICATION The HIGHBAND 25 RANGE of modules provides
Trang 1Issue1 - Draft 01/07/04 Form: E104 1of 2
SUBJECT TO CHANGE
D ESCRIPTION : H IGHBAND 25 C ATEGORY 6 M ODULE
PRODUCT DESCRIPTION AND APPLICATION
The HIGHBAND 25 RANGE of modules provides a 24 pair high-density, high performance, cost competitive Category 6 data grade module, (the 25th pair is not used) and a high-density cost competitive 25 pair Category 3 voice grade module to accept UTP & STP copper cables It will supplement the existing HIGHBAND™ Range of modules The upper and lower shell are moulded in PBT The Category 6 shield is manufactured from tin plated mild steel The module is designed for mounting on a backmount frame
Modules are terminated with the standard KRONE termination tools 6089 2 003-00 or 6417 2 055-01
Module may also be terminated with a 110 tool
A range of accessories is available for mounting, patching, labelling, numbering and disconnecting
TECHNICAL SPECIFICATIONS
Environment for use: Indoors or in dry enclosure rated IP54 or greater Operating temperature range: -40°C to +80°C
Maximum relative humidity: ≤ 93% non-condensing
Wire range for solid & stranded copper conductors: 0.4-0.65 (26-22 AWG)*
* A maximum of 2 equal, solid conductors only, of up to 0.5 conductor diameter can be terminated per slot Only 1 conductor of stranded wires per slot can be terminated
If any conductors >0.5 have been terminated, reversal to smaller conductors in no longer possible
Wire insulation diameter range (PE, PVC): Typically 0.7-1.4
Number of wire reterminations: Up to 200
Wire insertion force (0.5 conductor diameter): 6N
Wire pull out force, radial (0.5 conductor diameter): 5N
Wire pull out force, axial (0.5 conductor diameter): 35N
Number of patching cycles, Modules: Up to 750
Transmission & reliability: CAT 6 module: Meet & exceed Category 6 std
(ISO 11801 & TIA/EIA 568-B.2-1) CAT 3 module: Meet & exceed Category 3 std
(ISO 11801 & TIA/EIA 568-B.2) Change of contact interface resistance after reliability testing < 5mΩ Typical
to ISO/IEC 11801 and TIA/EIA 568B per through connection
ie 2 insulation displacement and 1 disconnection contact joint:
Voltage/current rating at 25°C ambient: ≤ 150V AC at 2.5A max
Dielectric strength: ≥ 1.5kV AC
Surge voltage strength (1.2/50 µsec wave shape): ≥ 2.5kV
Surge current strength (8/20 µsec wave shape) Modules: ≥ 3kA
Insulation resistance: ≥ 50,000 MΩ at 500 VDC
DC Resistance (CAT3) ≤ 0.3Ω to ASTM D4566 @20°C±3
Flammability rating of plastic housing: UL 94 V0
Trang 2Issue1 - Draft 01/07/04 Form: E104 2of 2
SUBJECT TO CHANGE
G ENERAL D IMENSIONS
A CCESSORIES
PATCH CORD 4 PAIR – RJ45 6451 2 700-XX
PATCH CORD 4 PAIR – 4 PAIR 6451 2 701-XX
PATCH CORD 1 PAIR 6451 2 702-XX
LABEL HOLDER 6462 2 408-00
O THER R ELATED P RODUCTS
HIGHBAND 25 CATEGORY 3 MODULE 6468 2 300-00
BMF KIT 300 PAIR 6450 1 101-00
BMF KIT 900 PAIR 6450 1 102-00
CABLE MANAGEMENT KIT 300 PAIR 6450 1 103-00
CABLE MANAGEMENT KIT 900 PAIR 6450 1 104-00
BACK MOUNT FRAME 12 WAY T=83 6450 2 155-00
CABLE MANAGEMENT KIT 300 PAIR 6450 1 103-00
CABLE RING SINGLE 6450 1 156-01
CABLE RING DUAL 6450 1 156-02
CABLE TROUGH 6450 2 157-00
COVER SINGLE 6450 2 158-01
COVER DUAL 6450 2 158-02
Date Approved By: