Category 5ePatch Cords Shielded/Unshielded KRONE Far East 70 Bendemeer Road #06-02 Hiap Huat House Singapore 339940 Tel : 65-6538 8628 Fax : 65-6538 8636 Email : kfe.mktg@krone.com http
Trang 1Category 5e
Patch Cords Shielded/Unshielded
KRONE Far East
70 Bendemeer Road
#06-02 Hiap Huat House Singapore 339940 Tel : 65-6538 8628 Fax : 65-6538 8636 Email : kfe.mktg@krone.com http://www.kroneasia.com
KRONE
Product Features:
• Exceeds TIA/EIA Category 5e
requirements
• Rugged strain relief maintains proper
bend radius to ensure peak performance
Application:
• Transmission performance exceeds
TIA/EIA 568B Category 5e or ISO/IEC
11801 Class D standard requirements
Possible Services:
• Ethernet 10 BaseT
• Fast Ethernet 100 BaseT
• Gigabit Ethernet 1000 BaseT
• ATM 155 Mbit/s
• Cable sharing (same or different
services)
• CDDI/TPDDI (FDDI on copper)
• Token 4/16 Mbit/s
• Analogue Telephony, ISDN
Trang 2• Description
This KRONE Category 5e Patch Cords are based on the KRONE Cat.5e plug The Cat.5e RJ45 Patch Cords exceed the requirements of Category 5e according to TIA/EIA 568 B Category 5e or ISO/IEC 11801:2002 Class D due to the integrated cable management of the plug
This Cat.5e RJ45 Patch Cords have a rugged Cat.5e boot to maintain the minimal bending radius The Cat.5e RJ45 Patch Cords are offered in different lengths
Typical measurements of a KRONE Cat.5e RJ45 Patch Cord (length 2m)
Ordering Information
6451 6 114-xx/yy Cat.5e RJ45 Patch Cord FTP, PVC 10 pieces
xx : 10 = 1.0m; 20 = 2.0m; 30 = 3.0m; 40 = 5.0m
yy : 08 = yellow boots; 05 = red boots; 06 = blue boots;
07 = green boots; 04 = black boots