AL FORM dismantling tool manual EN

DISMANTLING TOOLSMANUALS Kumkang Kind’s AL-formworks system... Part 1: PIN & WEDGE DISMANTLING PROCESS... 6/17/24 Page 4Strike the Wedge With the assembling tool... Part 2: WALL PANEL DI

DISMANTLING TOOLS

MANUALS

Kumkang Kind’s AL-formworks system

Part 1: PIN & WEDGE DISMANTLING PROCESS

6/17/24 Page 3

Strike the Wedge directly

6/17/24 Page 4

Strike the Wedge With the assembling tool

Part 2: WALL PANEL DISMANTLING PROCESS

Notes: to protect the extended wall panel

we must dismantle the panel from the top.

6/17/24 Page 6

Dismantling tool

6/17/24 Page 7

Up

Notes: the extended form area is very weak and easy to

be broken under too much strength So this area should

be gently treated.

1

Supporting point

6/17/24 Page 8

6/17/24 Page 9

Optional & not reccommended!

Only used when the previous work cannot help.

If neccesary, do it slowly & gently

6/17/24 Page 10

Down

BEFORE AFTER

Supporting point 1

Supporting point

6/17/24 Page 11

6/17/24 Page 12

6/17/24 Page 13

Pull out

6/17/24 Page 14

Swing to protect the panel footing

Part 3: SLAB PANEL DISMANTLING PROCESS

15

6/17/24 Page 16

After removing the pin & long pin dismantle the Beam

Down

6/17/24 Page 17

Beam dismantled

6/17/24 Page 18

Dismantle the slab panel

Dismantling tool

6/17/24 Page 19

Dismantle the slab panel

Thank you for your attention!