Totem installing IHO

Migrating to IHO Certificate for S-63 1.1 in Totem ECDIS This guide is based on the Totem ECDIS Version 2.0... To install S-63 1.1 Data the latest IHO certificate will need to be instal

Migrating to IHO Certificate for S-63 1.1 in Totem ECDIS

This guide is based on the Totem ECDIS Version 2.0

To install S-63 1.1 Data the latest IHO certificate will need to be installed in your ECDIS The

IHO.CRT is located on any AVCS S-63 1.1 Media To install it please insert the S-63 1.1

Media into your ECDIS and follow the steps below:

1 Open ECDIS menu "Charts and Navigation" and choose "S63 Manager utility (figure 1)

Figure 1

2 In S63 Manager click on "Install SA (IHO) Certificate" button (figure 2)

Figure 2

3 Browse to the inserted CD/DVD directory that contains the file-"IHO.CRT",

(supplied by AVCS) choose it and click "Open" (figure 3) Then Continue with charts

Installation/updates as usual

1 1BMigrating from P R IMAR C R T to IHO.C R T

Figure 3.

The IHO.CRT has now been installed and S-63 1.1 data can be loaded into the ECDIS

2 3BR everting to P R IMAR C R T

If for any reason the migration to S-63 1.1 fails then the PRIMAR.CRT file will need to be

re-installed To do this insert any AVCS S-63 1.0 Media into your ECDIS and follow the same

process as described above except this time selecting the PRIMAR.CRT

Your system will now be in the same state as before attempting the upgrade and you can

continue to use AVCS S-63 1.0 data However, you should inform your Admiralty Chart

Agent of the problems that you have encountered

UKHO 2013 All Rights Reserved

The copyright in this document, which contains information of a proprietary nature, is vested in UKHO

The content of this document may not be used for purposes other than that for which it has been supplied

and may not be reproduced, either wholly or in part, in any way whatsoever