tạo hiệu ứng nền

Start working by creating a new document (Ctrl+N) in Adobe Photoshop CS3 with the size 1280px by 1024px (RGB color mode) at a resolution of 72 pixels/inch. Use the Paint Bucket Tool (G) to fill with black color the new background layer.

Final Image Preview

Start working by creating a new document (Ctrl+N) in Adobe Photoshop CS3 with the size 1280px by 1024px (RGB color mode) at a resolution of 72 pixels/inch Use the Paint

Bucket Tool (G) to fill with black color the new background layer.

Take now the Rectangle Tool (U) and draw a rectangle on the whole canvas Click on Add

a layer style icon from bottom part of the Layers panel and select Gradient Overlay.

Click in the color bar to open the Gradient Editor and set the color stops as shown Click

OK to close the Gradient Editor dialog box.

We’ve got the next background:

Duplicate this layer and change the Opacity to 0% for copy.

Go to Layer Style and change the Gradient Overlay settings as shown.

Click in the color bar to open the Gradient Editor and set the color stops as shown Click

OK to close the Gradient Editor dialog box.

We’ve got the next result:

Now take the Ellipse Tool (U) and draw the next ellipse, set Opacity to 0% for this layer.

Click on Add a layer style icon from bottom part of the Layers panel and select Gradient

Overlay.

Click in the color bar to open the Gradient Editor and set the color stops as shown Click

OK to close the Gradient Editor dialog box.

It’s the result you must get on this stage:

Select now the Pen Tool (P) and try to represent the contours of a fir tree, like on the next

picture:

Select the Custom Shape Tool (U) in the Tools bar, in the Options bar click the Shape to open the selection menu Find 5 Point Star at the bottom of the menu, and then double-

click a shape thumbnail to select it

Fill the whole fir tree’s inside space with selected shape, changing also their sizes using

Free Transform (Ctrl+T) command.

One star should be situated on the fir tree’s top, click on Add a layer style icon from bottom part of the Layers panel and select Outer Glow.

This is the result you should get now:

Next we’ll select three types of snowflakes from Custom Shape Tool (U) like those from

below:

Draw and place the snowflakes in an arbitrary way on our canvas, we may change their

Opacity value on the Layers panel: Fill: 10%, 20%, 40%.

Choose again the Custom Shape Tool (U) in the Tools bar, in the Options bar click the

Shape to open the selection menu Find Registration Target 2 at the bottom of the menu,

and then double-click a shape thumbnail to select it

Draw and place this shape under the layer containing the top star, the same way situated

below: Fill - 0% on this layer:

Click on Add a layer style icon from bottom part of the Layers panel and select Gradient

Overlay.

Click in the color bar to open the Gradient Editor and set the color stops as shown Click

OK to close the Gradient Editor dialog box.

We’ve got the next result:

Choose the Pen Tool (P), set the drawing mode on Shape Layers in Options bar and

draw the next shape as shown on the fir tree, choosing the next colors:

We’ve got the next result:

The final result!

Final Image Preview

Inspired from Hexillus by Miniman.

Create a new document (Ctrl+N) in Adobe Photoshop with the size 1920px by 1200px (RGB color mode) at a resolution of 72 pixels/inch Use the Paint Bucket Tool (G) to fill with #010E1F color the new background layer.

To create a fiber background we’ll download Spiderman Pattern from brusheezy.com

Copy the pattern file and paste it into, C:/Adobe/Photoshop/Presets/Patterns.

Create a new layer and fill it with black color, click to Add a layer style icon from

bottom part of the Layers panel and select Pattern Overlay Go to Pattern Picker, and additional Spiderman Pattern can be added by loading them from the Picker’s submenu.

We’ve got the next effect:

Click on the same layer on the bottom part of the Layers panel on Add layer mask icon and choose a Soft Round brush of black color from Brush Tool (B)( set the Opacity to

10% in Options bar)

Use Soft Round brush to paint in the mask to hide a little the document’s edges:

Create a new layer and select again the Soft Round brush

Use the Soft Round brush to paint the central part of the document with the #003173 color

On the next new layer we’ll apply again Soft Round brush to paint more the same part of the picture with the next color - #0F6FBC

Next pass on Adobe Illustrator program and choose here the Ellipse Tool (L) to draw two

ellipses of black color

Using the Direct Selection Tool (A), select both ellipses and apply here the next option:

Object>Blend>Blend Options

We’ve got the next result:

Select the ellipses and press CTRL+C(Copy) Pass on Adobe Photoshop program after that and press CTRL+V (Paste As - Pixels).

Select for this layer CTRL+I (Inverse)

Set the Blending mode to Soft Light for this layer and click Add a layer style icon from bottom part of the Layers panel to select Drop Shadow:

We’ve got the next result:

Click on the same layer on the bottom part of the Layers panel on Add layer mask icon and choose the Soft Round brush (Opacity 20%) of black color

Use Soft Round brush to paint in the mask to hide the ellipses edges.

Create a new layer and select the Airbrush Soft Round brush of white color

Use Airbrush Soft Round brush to draw several small circles by changing the Opacity,

Hardness value and the brush’s size

Click on Add a layer style icon from bottom part of the Layers panel to select Outer

Glow

Add Inner Glow

We’ve got the next result:

Create the next new layer and select the Soft Round brush

Draw a spot of the color #FF00FF (set the Opacity to 10% in Options bar)

Use the same Soft Round brush for a new layer to paint the shown part below with the color #4AC1E4

Create a new layer and select the Airbrush Soft Round brush and white color (Opacity 30%)

Use the Airbrush Soft Round brush to represent a spot on the central part of the canvas.

Next choose the Pen Tool (P), set the drawing mode on Shape Layers in Options bar and

draw many shapes as shown

Set Fill to 0% for this layer and click Add a layer style icon from bottom part of the

Layers panel to select Gradient Overlay:

Click in the color bar to open the Gradient Editor and set the color stops as shown Click

OK to close the Gradient Editor dialog box.

We’ve got the next gradient on the shape:

Draw another shape

Set Fill to 0% and go to Layer Style >Gradient Overlay

Open the Gradient Editor and set the color stops as shown Click OK to close the

Gradient Editor dialog box.

We’ve got the next effect:

Draw another shape:

Set Fill to 0% and click Add a layer style icon from bottom part of the Layers panel to select Gradient Overlay:

Open the Gradient Editor and set the color stops as shown Click OK to close the

Gradient Editor dialog box.

We’ve got the next result:

Represent another shape using Pen Tool (P)

Set Fill to 0% and go to Layer Style>Gradient Overlay

Open the Gradient Editor and set the color stops as shown.

We’ve got the next result:

Draw another shape:

Set Fill to 0% and click Add a layer style icon from bottom part of the Layers panel to select Gradient Overlay:

Click in the color bar to open the Gradient Editor and set the color stops as shown Click

OK to close the Gradient Editor dialog box.

We’ve got the next gradient on the shape:

Represent another shape:

Set Fill to 0% in Layers panel, add Layer Style>Gradient Overlay

Open the Gradient Editor and set the color stops as shown Click OK to close the

Gradient Editor dialog box.

We’ve got the next result:

Represent another shape on the right part

Set Fill to 0% for this layer and click Add a layer style icon from bottom part of the

Layers panel to select Gradient Overlay:

Click in the color bar to open the Gradient Editor and set the color stops as shown Click

OK to close the Gradient Editor dialog box.

We’ve got the next effect:

Final Image Preview

Let’s create a new file (File>New) of 1920×1200px/72 dpi Using the Paint Bucket Tool

(G), give the new background layer black color.

On a new layer (Create new layer) we’ll apply a standard brush to represent a spot on the central part of the picture The brush’s color is #007EC7

Select the next option for the layer containing the spot: Fitler>Distort>ZigZag

The layer’s parameters:

Fill 54%

Next we’ll choose the Rectangle Tool (U) to represent three white lines which must be turned over with Free Transform option.

Those three layers with the white lines must be combined in a group (press Ctrl button to

mark out the lines’ layers and hold on the left mouse’s button while moving the marked

layers on Create a new group selection).

Mark out the group now and then press CTRL+E On the rasterized layer we’ll apply the next option: Fitler>Distort>Wave

On the same layer we need to apply also Filter>Blur>Gaussian blur

Set the next parameters for the layer by clicking on the same layer on the layers’ panel:

Blending mode-Overlay

Fill 44%

Blending Options>Drop Shadow

Blending Options>Outer Glow

Make a copy of the recently made layer and choose Free Transform option to turn over

the copy the same way demonstrated on the picture

Now we need to represent a new layer (Create new layer), applying here a standard brush

to paint the new layer in two colors (on the top part we’ll choose the green color, on the

bottom – the blue one) (Opacity 10%).

•