NEOWEB® Cellular Confinement System Geocellswith NEOLOY® Design-life Polymeric Alloy SLOPE PROTECTION PRS - Neoweb - Slope - 75 - 100 - 150 - 200 Weld Spacing Distance mm Neoloy®-ba
Trang 1NEOWEB® Cellular Confinement System (Geocells)
with NEOLOY® Design-life Polymeric Alloy
SLOPE PROTECTION
PRS - Neoweb - Slope - 75
- 100
- 150
- 200 Weld
Spacing
Distance
(mm)
Neoloy®-based
Applications-Slope Protection
Cell Height (mm)
No of Strips / Section
Colors S-Sand C-Carbon Black G-Green GR-Grey
PROPERTIES DESCRIPTION DESCRIPTION DESCRIPTION
Cell Distance between Weld Seams 356 mm (±2.5%) 445 mm (±2.5%) 712 mm (±2.5%)
Cell Wall Heights 75, 100, 150, 200 mm 75, 100, 150, 200 mm 75, 100, 150, 200 mm
Cell Dimension (Expanded) 260 x 224 mm (±3%) 340 x 290 mm (±3%) 520 x 448 mm (±3%)
Section Size (Expanded) 2.7 x 7.4 m (±3%) 2.8 x 10.7 m (±3%) 2.7 x 14.8 m (±3%)
Section Area (Expanded) 20 m2 30 m2 40 m2
CELL & SECTION NOMINAL DIMENSIONS
Product Section Weight
(~kg) Pallet Gross Weight (kg) (pallet ~13 kg) Sections per Pallet Area per Pallet (m2) Quantity - m2 per 20’ Container (5)
(max 20 pallets)
Quantity - m2 per 40’ Container (5) (max 44 pallets) PRS-356-75-64P 17.2 460 26 520 10,400 22,800
PRS-356-100-64P 22.4 460 20 400 8,000 17,600
PRS-356-150-64P 34.4 426/495 12/14 240/280 5,600 12,440
PRS-356-200-64P 44.6 459 10 200 4,000 8,800
PRS-445-75-74P 19.2 513/552 26/28 780/840 16,800 36,840
PRS-445-100-74P 25.5 516 20 600 12,000 26,400
PRS-445-150-74P 38.5 475/552 12/14 360/420 8,400 18,360
PRS-445-200-74P 50.3 516 10 300 6,000 13,200
PRS-712-75-64P 17.2 460 26 1040 22,800 45,600
PRS-712-100-64P 22.4 460 20 800 17,600 35,200
PRS-712-150-64P 42.6 420/495 12/14 560 11,200 24,880
PRS-712-200-64P 44.6 459 10 400 8,000 17,600
SHIPPING DATA(4) (for standard size section with 64/74 strips per section)
(4) All data are given as indication only and not binding on PRS Pallet data varies due to container stacking limitations; Typical pallet
dimensions are ~106 x 108 cm (l x w) x 108-115 cm (ht)
(5) Additional sections are packed in bulk (not palletized) inside containers in order to maximize shipping capacity
* Note - Does not include Bostitch P50-10B Stapling Plier and Bostitch SB103020-1/2- 2M Galvanized Staples, 1/2 “(13 mm) 2100/box
DESCRIPTION ISSUED BY CERTIFICATE NUMBER
Quality Management System Certification - ISO9001:2008 IQC Group (RvA) 12763
CE Marking per EU Directive 89/106/EEC ITB, Building Research Institute, EU 1488-CPD-0099
Accreditation of New Materials and Techniques Indian Roads Congress IRC-24(12)2009(ACC-30)
GOST R – Mark of Conformity - Russian Standards Institute Federal Agency for Technical Regulation, Russia POCC IL AE83.HO7573
Certificate of 3D Cellular Confinement System Compliance Gazpromsert Certification Dept., Gazprom, Russia ГО00.IL.1101.Н00019
CERTIFICATIONS and ACCREDITATIONS
- 64(1) - P(2) - T
Stabilizing an unstable world! www.prs-med.com
Perforated
- 356
- 445
- 712
- S(3)
- C
- G
Optional Predrilled Holes
(1) No of Strips –default no of strips is 64 strips/section, except for PRS-445, which is 74 strips/section.
Customization – different no of strips (and heights) available upon special order
(2) Standard Perforations – holes up to 6-10% of cell wall area of variable dimensions and shapes
(3) Colors – Sand (beige) is recommended color
Trang 2Specifications - NEOWEB® with NEOLOY®
SLOPE PROTECTION
(based on dimensionally stable polymer nano-fibers (polyester or nylon) in a polyolefin matrix) Friction Angle Efficiency Angle of internal friction efficiency factor >0.80
SYSTEM PHYSICAL PROPERTIES
SHORT TERM
LONG TERM RESISTANCE TO PLASTIC
(Permanent) DEFORMATIONS (Creep Included)
• Allowed Strength for Design (50 years)
• Creep (Deformation) Reductoin Factor (50 years)
> 7.2
< 2.7
ASTM D-6992 (SIM) (3) MECHANICAL PROPERTIES - STIFFNESS AND STRENGTH
(1) Test sample cut from cell seam to seam measured at strain rate 20%/min, 23°C;
(2) Allowed strength to reach 10% creep strain max for 50 years at 23°C;
(3) Creep (deformation) reduction factor for 50 years at 23°C
ASTM E831 (4) DIMENSIONAL STABILITY
(4) CTE measurement range from -30°C to +30°C
Flexural Storage Modulus at sample temperature:
> 750
> 650
> 550
> 300
ASTM E2254 (DMA) PERFORMANCE AT ELEVATED TEMPERATURES
Oxidative induction Time (OIT)
(virgin material prior to any aging)
(OIT @ 200°C) OXIDATION RESISTANCE
Durability to UV Degradation
• Retention of tensile strength
• Retention of tensile elongation to yield
> 80
> 80
aging, accelerated method
@ 30,000 hrs; ISO 4892-3 PHOTOCHEMICAL RESISTANCE
Stabilizing an unstable world! www.prs-med.com