GIÁO TRÌNH PRODUCT SPECIFICATION

INTRODUCTION The purpose of this document is to define final product specifications to be employed in the development of the design for the Refinery.. Data on the specifications of fina

PRODUCT

SPECIFICATION

A

FOSTER WHEELER ENERGY LTD PROCESS ENGINEERING

3550-8110-PD-0004 PAGE 2 OF 12 REV D3

1 INTRODUCTION

The purpose of this document is to define final product specifications to be employed in the development of the design for the Refinery

Data on the specifications of final products have been provided by Employer These are based on a combination of applicable international and national standards supplemented – where appropriate – by specific Employer sales specifications

Product specifications are included for the following products

• LPG

• Gasoline

• Kerosene

• Jet

• Diesel

• Fuel Oil

• Paraxylene

• Benzene

• Polypropylene

• Sulphur

PRODUCT

SPECIFICATION

A

FOSTER WHEELER ENERGY LTD PROCESS ENGINEERING

3550-8110-PD-0004 PAGE 3 OF 12 REV D3

2.1 LPG Specification

1 LPG

Density (@15deg C) kg/l ASTM D-1657 or

ASTM D-2598 0.5<

Vapor Pressure

ASTM D-1267 or ASTM D-2598 1,430>

Vapor Temperature

Composition of 100 ml

Copper Strip Corrosion - ASTM D-1838 1>

ASTM D-6667 100>

FEDD Design Base Specifications Unit Test Method

PRODUCT

SPECIFICATION

A

FOSTER WHEELER ENERGY LTD PROCESS ENGINEERING

3550-8110-PD-0004 PAGE 4 OF 12 REV D3

2.2 Gasoline Specification

Distillation IB deg C Report

Disillation E10 vol%

-Cu Corrosion (3hrs, @50 deg C)

TCVN 2694:2000 (ASTM D-130) 1>

Existent Gum mg/100ml TCVN 6593:2000

(ASTM D-381) 4>

Oxidation Stability minutes TCVN 6778:2000 (ASTM D-525) 480<

Sulfur wt ppm TCVN 6701:2000 (ASTM D- 2622) /ASTM D-5453 50>

RVP (@38deg C) kPa TCVN 7023:2002 (ASTM D- 4953) /ASTM D-5191 60> (summer)

75> (winter) Benzene vol% TCVN 6703:2000 (ASTM D- 3606) /ASTM D-5580 1.0>

Aromatics vol% TCVN 7330:2003 (ASTM D- 1319) /ASTM D-6839 40>

Olefins vol% TCVN 7330:2003 (ASTM D- 1320) /ASTM D-6839 30>

Oxygen wt% TCVN 7332:2003 (ASTM D- 4815) /ASTM D-6839 2.7>

Density (@15deg C) kg/l TCVN 6594:2000 (ASTM D- 1298) /ASTM D-4502 0.72~0.76

TCVN 2698:2002 (ASTM D-86)

Test Method TCVN 2703:2002 (ASTM 2699) ASTM

D-2700

PRODUCT

SPECIFICATION

A

FOSTER WHEELER ENERGY LTD PROCESS ENGINEERING

3550-8110-PD-0004 PAGE 5 OF 12 REV D3

2.3 Kerosene specification

Distillation IBP deg C 144<

TCVN 2708:2002 (ASTM D-1266) /TCVN 6701:2000 (ASTM D-2622) /ASTM D-4294 /ASTM

D-129

0.1>

Cu Strip Corrosion (3hrs, 100 deg C)

-TCVN 2694:2000 (ASTM D-130) 3>

Kinetic Viscosity

TCVN 3171:2003 (ASTM D-445) 1.0~1.9

Density (@15 deg C) kg/l TCVN 6594:2000 (ASTM D-1298) Report

TCVN 2698:2002 (ASTM D-86)

FEDD Design Base Specifications Unit Test Method

PRODUCT

SPECIFICATION

A

FOSTER WHEELER ENERGY LTD PROCESS ENGINEERING

3550-8110-PD-0004 PAGE 6 OF 12 REV D3

2.4 Jet A-1 Specification

Particulate Contamination mg/l ASTM D-5452 1>

TCVN 2708:2002 (ASTM D-1266-98) /ASTM D-2622

0.1>

Flash Point deg C TCVN 6608:2000 (ASTM D-3828) 38<

Density (@15 deg C) kg/l TCVN 6594:2000

Freezing Point deg C TCVN 7170:2002 (ASTM D-2386) -47>

Viscosity

TCVN 3171:2003

Cu Strip Corrosion (2hrs,

-TCVN 2694:2000

Ag Corrosion

-Thermal Stability

Existent Gum mg/100ml TCVN 6593:2000

Water Reation Interface - TCVN 7169:2002

Electorical Conductivity pS/m TCVN 6609:2000 (ASTM D-2624) 50~450

-FEDD Design Base

TCVN 2698:2002 (ASTM D-86)

Specifications Unit Test Method

PRODUCT

SPECIFICATION

A

FOSTER WHEELER ENERGY LTD PROCESS ENGINEERING

3550-8110-PD-0004 PAGE 7 OF 12 REV D3

2.5 Diesel Specification

Sulfur wt ppm TCVN 6701:2000 (ASTM D- 2622) /ASTM D-5453 50>/ 350>

-Flash Point deg C TCVN 6608:2000 (ASTM D- 3828) /ASTM D-93 55<

Kinetic Viscosity

TCVN 3172:2003 (ASTM

CCR (on 10%

TCVN 6324:1997 (ASTM D-189) /ASTM D-4530 0.2>

Ash wt% TCVN 2690:1995 (ASTM D- 482) 0.01>/ 0.01>

Cu Strip Corrosion

-TCVN 2694:2000 (ASTM

Density (@15 deg C) kg/l TCVN 6594:2000 (ASTM D- 1298) /ASTM D-4052 0.82~0.86

TCVN 2698:2002 (ASTM

D-86)

FEDD Design Base

PRODUCT

SPECIFICATION

A

FOSTER WHEELER ENERGY LTD PROCESS ENGINEERING

3550-8110-PD-0004 PAGE 8 OF 12 REV D3

2.6 Fuel Oil Specification

Density (@15deg C) kg/l TCVN 6594:2000 (ASTM D-1298) 0.991>

Kinetic Viscosity

TCVN 3171:2003 (ASTM D-445) 380>

TCVN 6701:2000 (ASTM D-2622) /ASTM D-129 /ASTM D-4294 /TCVN2708:2002 (ASTM D-1266-98)

1.0>

Pour Point deg C TCVN 3753:1995 (ASTM D-97) 24>

Ash wt% TCVN 2690:1995 (ASTM D-482) 0.15>

TCVN 6324:2000 (ASTM D-189) /ASTM D-4530

16>

TCVN 6608:2000 (ASTM D-3828) /ASTM D-93

66<

Water vol% TCVN 2692:1995 (ASTM D-95) 1.0>

Heat Combustion cal/g /ASTM D-4809 ASTM D-240 9,800<

FEDD Design Base Specifications Unit Test Method

PRODUCT

SPECIFICATION

A

FOSTER WHEELER ENERGY LTD PROCESS ENGINEERING

3550-8110-PD-0004 PAGE 9 OF 12 REV D3

2.7 Paraxylene Specification

Property Unit Specification Test method

Appearance

Clear liquid free of sediment

Visual Inspection

Purity wt% 99.7 MIN ASTM D-3798 Metaxylene wt% 0.2 MAX ASTM D-3798 Orthoxylene wt% 0.1 MAX ASTM D-3798 Non-Aromatics wt% 0.05 MAX ASTM D-3798 Total Sulphur Content ppmw 0.5 MAX 853/3120/4045 ASTM D-Distillation

range@760mmHg(abs) deg C 2.0 MAX ASTM D-850 SG(15.6°C/15.6°C) 0.864 – 0.867 ASTM D-3505/4052

Bromine Index mg/100g 20 MAX ASTM D-1492/5776 Chloride ppmw 1 MAX ASTM D-2384/5808

Colour (Pt-Co) Scale 10 MAX ASTM D-1209

PRODUCT

SPECIFICATION

A

FOSTER WHEELER ENERGY LTD PROCESS ENGINEERING

3550-8110-PD-0004 PAGE 10 OF 12 REV D3

2.8 Benzene Specification

Property Unit Specification Test method

Appearance

Clear liquid free of sediment

Visual Inspection

Purity wt% 99.96 MIN ASTM D-4492 Non-aromatics wt% 0.04 MAX ASTM D-4492 Total Sulphur ppmw 0.2 MAX 1685/4045/5623/3961 ASTM

D-Sulphur compounds H Free of

2 S/SO 2 ASTM D-853/5623 Distillation

range@760mmHg(abs) deg C 1.0 MAX ASTM D-850 SG(15.6°C/15.6°C) 0.882-0.886 ASTM D-4052 Solidification Point deg C 5.39 MIN ASTM D-852

Thiophene ppmw 0.2 MAX ASTM D-1685

E-1064/1744/1364/890

detected ASTM D-847

Chloride ppmw 0.2 MAX ASTM D-5808 Copper Corrosion Pass 1a or 1b ASTM D-849 Colour (Pt-Co) Scale 20 MAX ASTM D-1209 Toluene ppmv 150 MAX 4492/2360/5713 ASTM

D-Bromine Index mg/100g 20 MAX ASTM

D-1492/1491/5776 Total basic nitrogen (as

UOP 313-89/Mobil Method M-1662

PRODUCT

SPECIFICATION

A

FOSTER WHEELER ENERGY LTD PROCESS ENGINEERING

3550-8110-PD-0004 PAGE 11 OF 12 REV D3

2.9 Sulphur

Property Unit Specification Test

Method

Moisture (as liquid water)

Preferred Max Accepted

<2.0

(1)

Size Range

Mean Size Size Distribution Bigger than 6.3 mm Between 5.6 and 2.8 mm Smaller than 2 mm Smaller than 1 mm Smaller than 0.3 mm

Mm

wt%

wt%

wt%

wt%

wt%

2 and 4

<5 Over 75 Not defined

<2

<0.5

(1)

Friability Performance (% fine)

Standard stress level 1 friability test (10 inches tumber S5-77 test) fines Standard Stress level 11 friability test (28

inches tumber S5-77 test) fines

%

%

Less than 1.0 Less than 2%

(1)

Bulk Density

Loose, min Packed, min

Kg/m 3

Kg/m 3

1040

1200

(1)

Fines

Fines generated after direct shear test under Static loading at 24 psi

Fines generated after direct shear test under Dynamic loading at 24 psi

%

%

Not to exceed 0.2 Not to exceed 0.75

(1)

(1) To be agreed with Licensor/Vendor

PRODUCT

SPECIFICATION

A

FOSTER WHEELER ENERGY LTD PROCESS ENGINEERING

3550-8110-PD-0004 PAGE 12 OF 12 REV D3

2.10 Polypropylene

The Polypropylene product qualities are included in the MCI Process Design Package:

NSRP-PP PDP: VOLUME l, Section 4: Product Quality

This section gives a list of "Typical Physical Properties" for each grade produced (Total 33 grades)