Discmilling new catalogue 07 dao phay CNC

Discmilling cover 1 4 indd Seco Tools AB, SE 737 82 Fagersta, Sweden Tel +46 223 400 00 www secotools com COMPLETE EASY INNOVATIVE DISC MILLING CUTTERS AND INSERTS 02598546 ST20076115 GB SECO TOOLS AB.

Trang 1

COMPLETE EASY INNOVATIVE.

DISC MILLING CUTTERS AND INSERTS

ARGENTINA Seco Tools S.A Tel 54 11 4892-0060 Fax 54 11 4723-8600 AUSTRALIA Seco Tools Australia Pty Ltd Tel 1300 55 7326 Fax 1300 65 7326 AUSTRIA Seco Tools GmbH Tel (2253) 21040 Fax (2253) 21040-11 BELGIUM S.A Seco Tools Benelux N.V

Tel (02) 389 09 60 Fax (02) 389 09 89 BOSNIA See Solvenia BRAZIL Seco Tools Ind

Com Ltda Tel (0xx15) 2101-8631/34 Fax (0xx15) 2101-8605 BULGARIA See Sweden

CANADA Seco Tools Canada Inc Tel (905) 693 1780 Fax (905) 693 1788 CHINA Seco Tools (Shanghai) Co Ltd Tel + 86 - 21- 5426 5500 Fax + 86-21-64855685 COLOMBIA Rexo Tools Tel.(57 1)-6606030/31/32/33/35/37 Fax (57 1)-3110026 CROATIA See Slovenia

CZECH REPUBLIC Seco Tools CZ s.r.o Tel 549 249 241 / 549 216 399 Fax 549 245

740 DENMARK Seco Tools A/S Tel 43 44 76 00 Fax 43 44 50 30 ECUADOR See Sweden

FINLAND Seco Tools Oy Tel (09) 2511 72 00 Fax (09) 2511 72 01 FRANCE Seco Tools

France Tel 0825 826 379 Fax 02 48 67 27 05, Seco EPB Tel 03 88 71 38 89 Fax 03 88

70 98 98 GERMANY Seco Tools GmbH Tel (0211) 2401-0 Fax (0211) 2401275 GREECE Athens Mechanica Tel 2105231284-5 Fax 2105231286 HONGKONG Seco Tools (Shanghai) Co Ltd Tel 86- 21 - 5426 5500 Fax +86 - 21 - 64855685 HUNGARY Seco Tools KFT Tel (36-1) 267-6720 / 383-6568 Fax (36-1) 267- 6721 INDIA Seco Tools India (P) Ltd Tel 02137-667300 Fax 02137-667430 INDONESIA See Singapore ITALY Seco Tools Italia S.p.A Tel 031-978111 Fax 840-000938 JAPAN Seco Tools Japan K.K Tel 03-3239-

3071 Fax 03-3230-4955 MACEDONIA See Slovenia MALAYSIA Seco Tools Malaysia Sdn Bhd Tel 03-90591833 Fax 03-90594833 MEXICO Seco Tools de Mexico Tel./Fax 210-543-2200.NETHERLANDS Seco Tools Benlux N.V Tel 0183-636600 Fax 0183- 6606

NEW ZEALAND Seco Tools New Zealand Ltd Tel 09-415 8441 Fax 09-415 8442

NORWAY Seco Tools A/S Tel 67927300 Fax 67927302 PHILIPPINES See Singapore

POLAND Seco Tools (Poland) Sp z.o.o Tel (0-22) 637 53 86/85 Fax (0-22) 637 53 84

PORTUGAL Seco Tools Portugal, Lda Tel 256 371 650 Fax 256 371659 ROMANIA Seco Tools Romania S.R.L Tel 40 268 414 723 Fax 40 268 476 772 RUSSIA Seco AB Moscow Representative Office Tel +7(495)-680-1322 Fax +7(495)-680 6241 SERBIA AND MONTENEGRO See Slovenia SINGAPORE Seco Tools (S.E.A.) Pte Ltd Tel (65)

68 41 28 02 Fax (65) 68 41 28 01 SLOVAKIA Seco Tools SK s.r.o Tel 421 33 55 13 537,

421 33 53 41 911 Fax 421 33 55 13 538 SLOVENIA Seco Tools SI d.o.o Tel 003 86 2

450 23 40 Fax 00386 2 450 23 41 SOUTH AFRICA Seco Tools S.A (Pty) Ltd Tel (011)

36 22 660 Fax 011 362-1893 SOUTH KOREA Seco Tools Korea Ltd Tel 041 622 -9785

to 9 Fax 041 622-9784 SPAIN Seco Tools España S.A Tel 934 745 533 Fax 934 745 550

SWEDEN Seco Tools AB Tel 223 400 00 Fax 223 718 60 Telex 7510 SWITZERLAND Seco Tools AG Tel.0041-32 332 78 78 Fax 0041-32 332 78 79 TAIWAN Seco Tools Taiwan Tel 02-26577918 Fax 02-26579461 THAILAND Seco Tools Thailand Tel 02-7467 801 Fax 02-7467 802 TURKEY Seco Kestak A.S Tel (212) 613 40 43 / 613 40 44 Fax (212) 613 40

42 UKRAINE Seco Tools Ukraine Tel (056) 790 05 44 Fax (056) 790 05 43 UNITED KINGDOM Seco Tools (U.K.) Ltd Tel (01789) 764341 Fax (01789) 761170 USA Seco

Tools Inc Tel 586-497 5000 Fax 586-497 5627/5629.

Trang 2

Notes

Trang 3

YOU KNOW WHAT YOU WANT

SO DO WE

You’ve got enough to do without slamming through a mass of confusing

catalog pages, trying to fi gure out if a supplier has the product you’re

after Don’t you really just want to know that you ordered a reliable tool

that’s right for the job, and that your people won’t wonder what you were

thinking about when you placed the order?

Seco gives you confi dence:

Our lineup of disc milling cutter bodies, inserts, and toolholding

options is the most complete in the industry- we have what you need.

Ordering from Seco is simple- you’ll fi nd exactly what you’re looking

for quickly, so you can focus on something else.

Seco is a true innovator- our disc milling products feature technology

designed to maximize production and ease of use in any disc milling

application.

“Our customers tell us they want a comprehensive range of accurate, free

cutting, durable and energy-effi cient disc milling and slotting solutions,”

says Bertrand Riviere, R&D Project Leader for Seco Disc Mills.

Does this sound like you?

•

Trang 4

Choosing the correct cutter body and inserts should be straightforward and quick, and should leave you feeling confi dent you’ve made the right choice

Seco’s new Disc Mill Guide makes fi nding the right cutter body and serts for any disc milling application so easy, you’ll wonder why no one else does it this way! We just think that making it easier to fi nd the right cutter

in-or insert fin-or your machines makes it easier fin-or you to choose Seco.

TOOL SELECTION THE WAY IT SHOULD BE.

Trang 5

Ø 6/8/10 SNHQ

LNK 06/08 335.19/SNHQ LNK 05/06 335.19/SNHQ

0,40 0,80

1,60 2,002,40 3,104,00

0,20 0,40

0,80 1,20

1,60 2,002,40 3,104,00 5,006,00

0,40 0,80

1,60 2,002,40 3,104,0

3,0 3,5 4,05,0 6,0

3,0 4,05,0

DISC MILLING CUTTERS - FIXED POCKET DESIGN

Full side and face - Fixed pocket design - Selection

Width

ap (mm)

Diameters (mm) Application

Full side and face for radius profile - Fixed pocket design - Selection

Insert tech.

See page Radii available (mm)

ap 14 – 17–20 mm

Trang 6

0,4 0,81,6 2,43,1 4,0

CH-R0,8

1,2 3,03,1 6,0

0,4 0,8 1,6 2,4 3,0 3,1 4,0 4,8

Full side and face - Adjustable design - Selection

Full side and face for radius profile - Adjustable design - Selection

Trang 8

The cornerstone of our approach to disc milling is to offer the widest range of inserts, cutter bodies, and attachment types in the industry Seco

is your single source tooling supplier for slotting, backfacing, circular interpolation, circlip grooving, dual-radius slotting, and trochoidal T-slotting.

The full standard range of disc milling cutters (available in diameters from

24 - 315 mm) consists of 5 families:

• 335.10 for slots from 2,25 – 4,1 mm

• 335.15 for circlip grooves from 1,6 – 5,15 mm

• 335.18 for slots from 8 – 20 mm (LNK inserts)

• 335.19 for slots from 4 – 14 mm (SNHQ inserts)

• 335.29 for full radius operations (using Ø6, 8, or 10 mm round inserts) For facing, square shoulder milling, or larger slots (8 – 31 mm), Seco recommends the 335.18 disc mill, available in both fi xed and adjustable pocket confi gurations.

WE HAVE THAT

Trang 9

With the industry’s most complete family of carbide grades, geometries

and radii, Seco provides a huge number of discmill combinations,

reduc-ing or even eliminatreduc-ing the cost of custom toolreduc-ing Of course, we’ll be

happy to customize for your unusual applications.

Our indexable carbide inserts provide longer tool life and superior

cut-ting data The positive rake results in a ‘softer’ cutcut-ting action- less vibration

and reduced cutting forces result in a more accurate cut, less energy used

to make it, and more parts machined in less time!

The challenges you face are constantly evolving In order to keep our

SOLUTIONS FOR EVERY APPLICATION

Trang 11

Seco now offers two new insert lines- SNHQ and LNK.

Both the SNHQ and LNK inserts feature:

Light cutting action generates low-vibration productivity and maximum

tool life

Up to four effective edges per insert for lower tooling cost

Available wiper fl ats, when a high-quality surface fi nish is essential

A positive cutting rake for reduced power consumption

For some widths, both SNHQ and LNK inserts are available, for optimum

production.

LNK05, 06, AND 08 INSERTS:

Very tough inserts designed for weaker machines or unstable machining conditions these cutters have fewer teeth engaged in the cutting process

Surface fi nish below Ra<2 µ Widths from 8 – 15 mm for adjustable pocket confi guration

Widths from 8 – 20 mm for fi xed pocket sion

ver-Radii 0,4 - 4,0 mm with up to four cutting edges

SNHQ INSERTS:

A higher metal removal rate can be achieved under stable machining conditions, due to more teeth in engagement

The new inserts are excellent for light cutting applications, due to positive insert geometries Right- or Left-handed

Four-edged inserts are available with corner radii from 0,2 – 2,0 mm

Two-edged inserts are available with corner radii from 2,0 – 6,0 mm

The SNHQ is a direct replacement for the old 335.19 inserts, but the SNHQ inserts provide additional features like wiper fl ats and more

Trang 12

With EPB tooling systems you will fi nd the most recent spindle tooling products and application techniques to successfully equip your machine tools.

There are 5 different product families:

SHRINKFIT DEVICES.

Holders have been developed especially for disc milling cutters (A-type confi guration) and are available in both Grafl ex and Seco Capto™ These holders provide far better reach than conventional holders since they are equipped with slim front end adjustable sliding shaft arbor For more complete information regarding Seco’s EPB discmillsholders please see:

• Seco EPB tooling catalogue part Grafl ex holders

• Seco Capto cataloge part tooling

• Leafl et with the new Monoblock HSK, BT and DIN discmillsholders

Or ask your local Seco Tools representative.

WE PROVIDE MORE

Trang 13

Combimaster™ is Seco’s two-piece milling cutter system, offering

maxi-mum fl exibility in a wide variety of applications, including disc milling

We offer holding systems for the whole Combimaster range of shank

types, lengths and interchangeable cutter heads.

Leading with technological innovation is part of what makes Seco

the total Disc Milling partner!

AND EVEN MORE

Trang 14

Material: GG25 Seco Material group 13Workpiece:

Competitor Seco

Cutter 335.19-100-07.27-5Inserts SNHQ120435ER/EL-M07 F40M

This meant that machining time was reduced from 7,36 minutes to 3,08 minutes

Earlier 50 pieces could be machined before indexing to fresh edges, this was increased to 80 pieces for SNHQ

INCREASED FEED SPEED GAVE PRODUCTIVITY BOOST WITH 116%

At a customer producing power generators a standard tool

Cutter R335.18-125-1215.32-5N with Inserts LNKT080540PPTL/PPTR-M06 F40M was applied on a part of a turbine house

Material was Gs17 CrMoV5.11 W.Nr.: 1.7706 Seco Material group 5.

For the customer this meant going from custom tooling from a competitor to standard products from Seco.

We can all understand the convenience this customer experienced,

shorter delivery times, reduced tool cost and not to mention easier

logistic handling.

This was made possible thanks to Seco’s big and wide standard

range of disc milling products

Application to be machined FROM CUSTOM TOOLING TO STANDARD

MBDA France, a world leader in the development and manufacture of missiles and missile systems can increase its productivity by using a disc mill 335.19- 100-06.27-5 equipped with SNHQ

120302 ER4 – E05 for the right hand and SNHQ 120302 EL4 – E05 for the left hand, since the inserts producing

fl at bottom profi les.

Recent tests have shown that the new SNHQ inserts avoid an extra operation to complete the fi n-

ished profi le

Application to be machined IMPROVED QUALITY WITHOUT EXTRA COST

CASE STORIES

Trang 16

18 – 19

20 – 22 24

25 – 26

27 – 28

29 – 31 32 33

34 – 38

39 – 40

41 – 44

45 – 48

49 – 51 50 52– 66

67 – 80

Index

Page

Disc milling cutter selection

Disc milling cutters introduction

335.15 cutters

335.10 cutters

335.10 spare parts

335.19 cutters

335.19 spare parts

LNK inserts No of cutting edges

335.18 cutters full side & face

335.18/335.19 cutters full radius profiling

335.18 cutters half side right hand

335.18 cutters half side and face left hand

335.18 spare parts, technical information, custom design

Technical information, disc mill 335.18

Cutting data

Inserts

Contents

Trang 17

Disc milling cutters

A full range of disc mills for all kind of disc milling operations

These disc mills, available in diameters from 24–320 mm, offer a wide choice of grades/insert

geometries allowing you to machine most material types Insert radii up to 8 mm are available.

The complete standard range of disc milling cutters consists of 5 families:

For circlip grooves 1,6 - 5,15 mm: Seco disc mill type 335.15

For width 2,25 - 4,1 mm: Seco disc mill type 335.10

For width 4 - 14 mm: Seco disc mill type 335.19 (SNHQ-inserts)

For width 8 - 20 mm: Seco disc mill type 335.18 (LNK.-inserts)

for 20 - 31 mm (335.18, AP 16, AC 15- inserts)

Seco disc mill type 335.29 with round inserts Ø 6, 8, and 10 mm

Seco can provide ’custom’ tools designed to suit your specific requirements.

Note: Maximum RPM that for safety reasons never shall be exceeded, are shown on each product page.

For fixed pocket disc milling cutter

SystemFor stub arbor

mount

Cutter width 4 = zc value

Disc milling cutters Cutter diameter Dimension of arbor bore

SystemFor stub arbor

mount

Minimum cutter width (adjustable cassettes)

Dimension of arbor bore

For adjustable disc milling cutter

Insert radius if round inserts used

Trang 18

Ø 6/8/10 SNHQ

LNK 06/08 335.19/SNHQ LNK 05/06 335.19/SNHQ

0,40 0,80

1,60 2,002,40 3,104,00

0,20 0,40

0,80 1,20

1,60 2,002,40 3,104,00 5,006,00

0,40 0,80

1,60 2,002,40 3,104,0

3,0 3,5 4,05,0 6,0

3,0 4,05,0

Full side and face - Fixed pocket design - Selection

Width

ap (mm)

Diameters (mm) Application

Full side and face for radius profile - Fixed pocket design - Selection

ap 14–17–20 mm

Trang 19

0,4 0,81,6 2,43,1 4,0

CH-R0,8

1,2 3,03,1 6,0

0,4 0,8 1,6 2,4 3,0 3,1 4,0 4,8

Full side and face - Adjustable design - Selection

Full side and face for radius profile - Adjustable design - Selection

Trang 20

Cylindrical: 24 & 34 mm B type: 63 mm

Basic choice for grooving, sawing and full side and face

Can also be uded for halfside and face From dia 63–315 mm

1 cutting edge per insert

ap = 2,25-4,1 mm Insert designation 150.10-

Trang 21

335.19 and 335.29 Disc milling cutters

Edge form:

Chamfer Corner radii 0,2–6 mm Full radius 3–6 mm

Edge form:

Full radius 3–8 mm Product pages: 39–40, 44, 48

335.19 cutter with SNHQ inserts

For full side and face use left and righthand inserts.

For half side and face use only left or righthand inserts.

B type: Ø 63–80 mmFixed pocket

B type Ø 82–320 mm Adjustable

A type Ø 102–320 mmAdjustableCylindrical Ø 50/63/80 mm

Trang 22

335.18 Disc milling cutters

335.18 LNK – Fixed pocket design

Adjustable cassette version

Basic choice for full side and face side and face and grooving

half-From dia 80–315 mm 1or 4 cutting edges per insert depending

Edge form:

Corner radii 0,4–6,0 mm

A type: Ø 100–315 mmAdjustable B type: Ø 80–315 mm mmAdjustable

Fixed pocket version

Basic choice for full side and face and grooving

B type: Ø 63–160 mmFixed pocketCombimaster: Ø 50 mm Cylindrical: Ø 32–80 mm

Trang 23

Disc milling cutter

335.18: Seco adjustable disc milling cutter family

LNK insert

Width 08–15 mm Round insert

Ø 08, 10, 12, 16 mm 335.18 insert

Width 14–30,5 mm AC 1506 insert

Width 20–29,2 mm AP 1604 insert

Width 22–31 mm 335.18-LNK adjustable design

Trang 24

Dc R335.15 -20024.3-03-1

-25034.3-03-2

R335.15 -063-03.22-5

-0636-05.22-5

24346363

1255

0,50,50,50,5

R335.15-13 R335.15-13 R335.15-13 R335.15-18

28200236001730017300

l 1

––4040

lc

5056––

R335.15-20024-25034

R335.15

-063-C03509-T15PC03509-T15P

l 2

130130––

lp

8074––

l 3

8074––

T15P-3T15P-3

–220.17-692

Please check availability in current price and stock-list.

*Torque value 3,0 Nm Dynamomentic keys, see Machining Navigator.

Disc milling cutter

For circlip grooves milling cutter R335.15

Part No.

Dimensions in mm

Tool angles: o = 0°

f = 0°

For insert selection and cutting data

recommendations, see page 52.

For complete insert programme, see page 71.

Type of mounting

Trang 25

Dc R335.10 -25063.3-02-5

-063-02.22-5 R335.10 -32080.3-02-6 -080-02.22-6 335.10 -080-02.22-6 335.10 -100-02.27-7 R335.10 -100-02.27-7 335.10 -125-02.32-9 R335.10 -125-02.32-9 335.10 -160-02.40-12 R335.10 -160-02.40-12 R335.10 -25063.3-03-5 -063-03.22-5 R335.10 -32080.3-03-6 -080-03.22-6 335.10 -080-03.22-6 335.10 -100-03.27-7 R335.10 -100-03.27-7 335.10 -125-03.32-9 R335.10 -125-03.32-9 335.10 -160-03.40-12 R335.10 -160-03.40-12 335.10 -200-03.40-14 -250-03.40-18 -315-03.40-24

-2,25N/2,5N -2,25N/2,5N -2,25N/2,5N -2,25N/2.5N -2,25N/2,5N -2,25N/2,5N -2,25N/2,5N -2,25N/2,5N -2,25N/2,5N -2,25N/2,5N -2,25N/2,5N -3N -3N -3N -3N -3N -3N -3N -3N -3N -3N -3N -3N -3N -3N

48 –

58 –

48 –

58 –

80 – – –

For insert selection and cutting datarecommendations, see page 53.

For spare parts, see pges 27–28.

Drawings for Type A and Type B 3 see next page.

Type

Type B 2 for stub Arbor

Width 2,25–4,1 mm, full side

Type B 1 for Cylindrical/Weldon shank

Insert 150.10- Type B 1

Trang 26

Dc R335.10 -25063.3-04-5

-063-04.22-5 R335.10 -32080.3-04-6 -080-04.22-6 335.10 -080-04.22-6 335.10 -100-04.27-7 R335.10 -100-04.27-7 335.10 -125-04.32-9 R335.10 -125-04.32-9 335.10 -160-04.40-12 R335.10 -160-04.40-12 335.10 -200-04.40-14 -250-04.40-18 -315-04.40-24

-4N -4N -4N -4N -4N -4N -4N -4N -4N -4N -4N -4N -4N -4N

48 –

58 –

80 – – –

For spare parts, see pges 27–28

Drawings for Type B 1 and Type B 2 see opposite page.

Type

Width 2,25–4,1 mm, full side

*Cutter dia 80 and 100 mm with spacer collars DIN2084/B Cutter dia >100 mm refers to Seco drive rings, see page 27

Please check availability in current price and stock-list.

Insert 150.10- Type B 1

Trang 27

l 2

106150

lp

2530

dm m

335.10-080 335.10-100 335.10-125 335.10-160-315

––611

dm m

335.10-2232 335.10-2240

D 5m

32402222

l 2

5050

lp

36–

Dc 335.10-14532

335.10-16340

dm m

324055

80

d hc

4563

d

611

Bkw

10,410,4

c

6,36,3

s

1012

dm m

335.10-2748 335.10-3258 335.10-4080

D 5m

485880

273240

l 2

506363

Bkw

12,414,416,4

c

789

––4563

22273240

Disc milling cutters 335.10 – Spare parts

Holder for type B 1

Key to be ordered separately

Drive ring to be ordered separately

Insert removal key

Trang 28

335.10-25.3 335.10-32.3 335.10-25.3 335.10-32.3 335.10-25.3 335.10-32.3

335.10-2232 335.10-2240 335.10-2232 335.10-2240 335.10-2232 335.10-2240

335.10-2748 335.10-2748 335.10-2748 335.10-3258 335.10-3258 335.10-3258 335.10-4080 335.10-4080 335.10-4080

Disc milling cutter 335.10- spare parts

Assembly alternatives/Standard parts for type B 1

Assembly alternatives/Standard parts for type B 3

Part No.

Spare parts

Cutter body Part No Holder Part No.

Cutter body Part No.

Holder Part No.

Trang 29

R335.19 -2550.0-4.2 -1650.RE-04.2 -3263.0-4.4 -1663.RE-04.4 -063.04.16-4 -063.04.22-3 335.19 -063.04.22-4 R335.19 -3280.0-4.5 -080.04.22-4 -080.04.22-5 335.19 -080.04.22-4 -080.04.22-5 R335.19 -100.04.27-6 335.19 -100.04.27-6 R335.19 -125.04.32-7 335.19 -125.04.40-7 R335.19 -160.04.40-9 335.19 -160.04.40-9

R335.19 -2550.0-5.2 -1650.RE-05.2 -3263.0-5.4 -1663.RE-05.4 -063.05.16-4 -063.05.22-3 335.19 -063.05.22-4 R335.19 -3280.0-5.5 -080.05.22-4 -080.05.22-5 335.19 -080.05.22-4 -080.05.22-5 R335.19 -100.05.27-6 335.19 -100.05.27-6 R335.19 -125.05.32-7

13,814,013,813,813,810,514,022,020,022,318,020,024,226,029,6

505063636363638080808080100100125125160160

505063636363638080808080100100125

dmm

25–32–1622223222222222272732404040

25–32–1622223222222222272732

E/l 2

150–170–––8170––1212–12–12–12

150–170–––8170––1212–12–

D 5 m

–30–30334033–4040

32 32

48

41 58

55 70

65

–

28 –3033

40 32–

40

32 33

48

41 58

l 3 /l c

11/11011,3–/14811–––148–11––––––––

10/11010,3–/16010––––/160–––––––

M

–M16–M16––––––––––––––

–M16

M16–––––––––––

448886810810810121214141818

448886810810810121214

Zc*

224443454545667799

224443454545667

0,60,20,30,30,30,50,51,20,60,60,20,20,70,21,00,51,20,7

0,60,21,30,30,30,50,51,20,60,60,20,20,70,31,0

191001910017100171001710017100171001520015200152001520015200135001350012200122001070010700

168001680014900149001490014900149001320013200132001320013200118001180010700

1102…R4(2)1102…R4(2)1102…R4(4)1102…R4(4)1102…R4(2)1102…R4(3)1102…R4(4)1102…R4(5)1102…R4(4)1102…R4(5)1102…R4(4)1102…R4(5)1102…R4(6)1102…R4(6)1102…R4(7)1102…R4(7)1102…R4(9)1102…R4(9)

1103…R4(2)1103…R4(2)1103…R4(4)1103…R4(4)1103…R4(2)1103…R4(3)1103…R4(4)1103…R4(5)1103…R4(4)1103…R4(5)1103…R4(4)1103…R4(5)1103…R4(6)1103…R4(6)1103…R4(7)

1102…L4(2)1102…L4(2)1102…L4(4)1102…L4(4)1102…L4(2)1102…L4(3)1102…L4(4)1102…R4(5)1102…L4(4)1102…R4(5)1102…L4(4)1102…R4(5)1102…L4(6)1102…L4(6)1102…L4(7)1102…L4(7)1102…L4(9)1102…L4(9)

1103…L4(2)1103…L4(2)1103…L4(4)1103…L4(4)1103…L4(2)1103…L4(3)1103…L4(4)1103…L4(5)1103…L4(4)1103…L4(5)1103…L4(4)1103…L4(5)1103…L4(6)1103…L4(6)1103…L4(7)

l 1 /l p

9435110353550–1105050––50–50–50–

9435110353550–1105050––50–50

Inserts Left hand SNHQ Cyl

For insert selection and cutting data recommendations, see page 54–55.

For complete insert programme, see page 75–77, 80.

Trang 30

R335.19 -1650.RE-06.2 R335.19 -2550.0-6.2 -3263.0-6.3 -1663.RE-06.3 -063.06.16-3 -063.06.22-3 335.19 -063.06.22-3 R335.19 -3280.0-6.4 -080.06.22-4 335.19 -080.06.22-4 R335.19 -100.06.27-5 335.19 -100.06.27-5 R335.19 -125.06.32-6 -125.06.40-6 335.19 -125.06.40-6 R335.19 -160.06.40-8 335.19 -160.06.40-8 -200.06.50-9 -250.06.50-12

R335.19 -063.07.16-3 -063.07.22-3 -080.07.22-4 335.19 -080.07.22-4 R335.19 -100.07.27-5 335.19 -100.07.27-5 R335.19 -125.07.32-6 -125.07.40-6 335.19 -125.07.40-6 R335.19 -160.07.40-8 335.19 -160.07.40-8 -200.07.50-9 -250.07.50-12

R335.19 -100.10.27-5 335.19 -100.10.27-5 R335.19 -125.10.32-6 -125.10.40-6 335.19 -125.10.40-6 R335.19 -160.10.40-8 335.19 -160.10.40-8 -200.10.50-9 -250.10.50-12

63638080100100125125125160160200250

100100125125125160160200250

dmm

–2532–162222322222272732404040405050

16222222272732404040405050

272732404040405050

E/l 2

–150170–––12170–12–12––12–121212

–––12–12––12–121212

–12––12–121212

D 5 m

28––30334040–4032484158705570656969

33404032484158705570656969

484158785570656969

l 3 /l c

9,39/110–/1609––––/160–––––––––––

–––––––––––––

–––––––––

M

M16––M16–––––––––––––––

–––––––––––––

–––––––––

4466666888101012121216161824

6688101012121216161824

101012121216161824

Zc*

22333334445566688912

33445566688912

5566688912

0,20,61,20,30,30,50,41,20,60,20,70,31,01,50,52,00,81,63,3

0,50,50,60,20,80,41,21,50,52,00,81,73,3

0,80,41,21,50,62,11,11,73,3

12300123001090010900109001090010900970097009700870087007700770077006800680063005600

9400940084008400750075006700670067005900590052004700

660066006000600060005200520047004200

1203…R.(2)1203…R.(2)1203…R.(3)1203…R.(3)1203…R.(3)1203…R.(3)1203…R.(3)1203…R.(4)1203…R.(4)1203…R.(4)1203…R.(5)1203…R.(5)1203…R.(6)1203…R.(6)1203…R.(6)1203…R.(8)1203…R.(8)1203…R.(9)1203…R.(12)

1204…R./-12045…R.(3)1204…R./-12045…R.(3)1204…R./-12045…R.(4)1204…R./-12045…R.(4)1204…R./-12045…R.(5)1204…R./-12045…R.(5)1204…R./-12045…R.(6)1204…R./-12045…R.(6)1204…R./-12045…R.(6)1204…R./-12045…R.(8)1204…R./-12045…R.(8)1204…R./-12045…R.(9)1204…R./-12045…R.(12)

1205…R.(5)1205…R.(5)1205…R.(6)1205…R.(6)1205…R.(6)1205…R.(8)1205…R.(8)1205…R.(9)1205…R.(12)

1203…L.(2) 1203…L.(2)1203…L.(3)1203…L.(3)1203…L.(3)1203…L.(3)1203…L.(3)1203…L.(4)1203…L.(4)1203…L.(4)1203…L.(5)1203…L.(5)1203…L.(6)1203…L.(6)1203…L.(6)1203…L.(8)1203…L.(8)1203…L.(9)1203…L.(12)

1204 L/-12045.L.(3)1204…L./-12045…L.(3)1204…L./-12045…L.(4)1204…L./-12045…L.(4)1204…L./-12045…L.(5)1204…L./-12045…L.(5)1204…L./-12045…L.(6)1204…L./-12045…L.(6)1204…L./-12045…L.(6)1204…L./-12045…L.(8)1204…L./-12045…L.(8)1204…L./-12045…L.(9)1204…L./-12045…L.(12)

1205…L.(5)1205…L.(5)1205…L.(6)1205…L.(6)1205…L.(6)1205…R.(8)1205…R.(8)1205…L.(9)1205…L.(12)

l 1 /l p

3594110353550–11050–50–5050–50–––

3550/50,550/50,5–50/50,5–5050/50,5–50/50,5–––

50–5050–50–––

Inserts Left hand SNHQ ( ) = No Of inserts

*Effective number of teeth

For shanks and dimensions, see Combimaster chapter in MN part 2

(Type Cyl)

** For ap = 7 mm use insert SNHQ 1204 , l1 =50,5 mm.For ap = 8 mm use insert SNHQ 12045 , l1 = 50 mm

Trang 31

R335.19 -100.12.27-5 335.19 -100.12.27-5 R335.19 -125.12.32-6 -125.12.40-6 335.19 -125.12.40-6 R335.19 -160.12.40-8 335.19 -160.12.40-8 335.19 -200.12.50-9 335.19 -250.12.50-11

335.19 -160.14.40-5 335.19 -200.14.50-6

160200

dmm

272732404040405050

4050

E/l 2

–12––12–121212

1414

D 5 m

484158705570656969

6569

l 3 /l c

–––––––––

––

M

–––––––––

––

101012121216161822

1518

Zc*

5566688911

56

0,90,41,31,60,72,11,32,13,3

1,62,5

600060005300530053004700470042003700

63004700

1207…R.(5)1207…R.(5)1207…R.(6)1207…R.(6)1207…R.(6)1207…R.(8)1207…R.(8)1207…R.(9)1207…R.(11)

1207…L.(5)1207…L.(5)1207…L.(6)1207…L.(6)1207…L.(6)1207…L.(8)1207…L.(8)1207…L.(9)1207…L.(11)

l 1 /l p

50–5050–50–––

––

XXXX

XXXXXX

Part No.

Type

Inserts Right hand SNHQ

Inserts Left hand SNHQ ( ) = No Of inserts

*Effective number of teeth

Please check availability in current price and stock-list

Trang 32

2,02,03,53,53,53,53,5

R335.19 -063 -063 -080 -100 -125 -125 -160

16222227324040

8,410,410,412,414,416,416,4

5,66,36,37899

18202022323030

16222227324040

Disc milling cutters 335.19 – Spare parts

Nm

For cutter Ø

Arbor screw

Arbor screw for type B

Please check availability in current price- and stock-list.

For cutter

Dimensions of mounting

Trang 33

R

XXXX

X

XXXXXXX

XXXX

XX

XXX

XX

X

XXX

XX

––

00,03

Radius possibilities/Number of cutting edges

Width and profile generated with LNK 06/08 radii R1.6/R2.0 and R2.4

H (mm) Radii 2 and 2,4 Radius 1,6

ap (mm)

X = First choice in fixed pocket = First choice for long overhang machining

Trang 34

R335.18 -1632.0-08.1N -2040.0-08.2N -2550.0-08.3N -1650.RE-08.3N -3263.0-08.3N -063.08.22-3N -080.08.22-4N 335.18 -080.08.27-4N -100.08.27-5N R335.18 -100.08.27-5N -100.0810.27-4N**

335.18 -100.0810.27-4N**

R335.18 -125.08.32-6N 335.18 -125.08.40-6N R335.18 -125.0810.32-5N**

-100.10.27-5N 335.19 -100.10.27-5N R335.19 -100.1012.27-4N***

335.18 -100.1012.27-4N***

R335.18 -125.10.32-6N 335.18 -125.10.40-6N R335.18 -125.1012.32-5N***

32 40

16202025–32223222272727272727324032404040405050

E

–––––––1515––15–15–15–1515–15

–––––––––15––15–15–15–15–15–1515

l 2

140140150–170––––––––––––––––

140140140150–––170––––––––––––––––

lp

929094110––––––––––––––––

92909094–110–110––––––––––––––––

l 3

232229,512–28,928,9––––––––––––––

21202027,510–27–27–––––––––––––––

24666688101088121210101212161618

24466668886101088121210101212161618

Zc*

123333445544665566889

122333344435544665566889

0,30,40,60,21,10,40,40,20,40,80,80,40,90,71,00,61,71,11,83,02,8

0,30,40,40,60,21,20,41,30,50,20,60,80,40,80,41,00,71,00,61,71,13,01,82,8

17300154001380013800123001230010900109009700970094009400840084008400840075007500670067006000

17300154001490013400134001190011900105001050010500105009400940094009400840084008400840075007500670067006000

LNK.05 LNK.05 LNK.05 LNK.05 LNK.05 LNK.05 LNK.05 LNK.05 LNK.05 LNK.05 LNK.05 LNK.05 LNK.05 LNK.05 LNK.05 LNK.05 LNK.05 LNK.05 LNK.05 LNK.05 LNK.05

LNK.05 LNK.05 LNK.06 LNK.06 LNK.06 LNK.06 LNK.06 LNK.06 LNK.06 LNK.06 LNK.06 LNK.06 LNK.06 LNK.06 LNK.06 LNK.06 LNK.06 LNK.06 LNK.06 LNK.06 LNK.06 LNK.06 LNK.06 LNK.06

l 1

–––35–5050––5050–50–50–50––50–

––––35–50–50–5050–50–50–50–50–50––

ar 1

8,010,012,522,015,511,520,0––––––––––––––

8,010,010,012,511,015,511,524,020,0–––––––––––––––

lc

108108110162–––––

––––––––

108108108110–160–160––––––––––––––––

M

–––M16––––––––––––––––

––––M16–––––––––––––––––––

D 5 m

–––28–40404141484841585558557055699069

––––28–40–40414848414841585558557055906969

Type B for stub arbor- Fixed pockets (Type B FP)

Width 8–12 – Full side

* Effective number of teeth

** The cutter is set to the minimum cutter width 8 mm +/-0,02 mm

A cutter may be ordered with the cutting width set to any value within its range,

see page 50 for more information

Trang 35

R335.18 -1650.RE-12.3N -2550.0-12.3N R335.18 -3263.0-12.3N -063.12.22-3N R335.18 -3280.0-12.4N -080.12.22-4N 335.18 -080.12.27-4N R335.18 -080.1215.27-3N**

R335.18 -100.12.27-5N 335.18 -100.12.27-5N R335.18 -100.1215.27-4N**

335.18 -100.1215.27-4N**

R335.18 -125.12.32-6N 335.18 -125.12.40-6N R335.18 -125.1215.32-5N**

200 200

250

6380100125125160

dmm

–2532223222272727272727324032404040405050

222227324040

E

––––––15––15–15–15–15–15–1515

––––1515

l 2

–150170–170––––––––––––––––

––––––

lp

–94110–110––––––––––––––––

––––––

l 3

825,5–25–25–––––––––––––––

2323––––

66668886101088121210101212161618

6810121214

Zc*

333344435544665566889

345667

0,20,61,20,41,30,50,30,70,90,40,90,51,00,71,10,71,91,83,32,13,6

0,50,60,91,10,81,5

13400134001190011900105001050010500105009400940094009400840084008400840075007500670067006000

11900105009400840084007500

LNK.06 LNK.06 LNK.06 LNK.06 LNK.06 LNK.06 LNK.06 LNK.08 LNK.06 LNK.06 LNK.08 LNK.08 LNK.06 LNK.06 LNK.08 LNK.08 LNK.08 LNK.08 LNK.08 LNK.08 LNK.08

LNK.08 LNK.08 LNK.08 LNK.08 LNK.08 LNK.08

l 1

35––50–50–5050–50–50–50–50–50––

50505050––

ar 1

11,012,515,511,524,020,0–––––––––––––––

11,520,0––––

lc

–110158–158––––––––––––––––

––––––

M

M16––––––––––––––––––––

––––––

D 5 m

28––40–40414848414841585558557055906969

404048585555

Type B for stub arbor- Fixed pockets (Type B FP)

Width 12–15 – Full side

Type A for milling arbor- Adjustable (type A adj)

Type B for stub arbor- Adjustable (Type B adj)

Type A for milling arbor - Fixed pockets (Type A FP)

Trang 36

R335.18 -080.17.22-3N R335.18 -100.17.27-3N R335.18 -125.17.32-4N 335.18 -125.17.40-4N R335.18 -160.17.40-5N 335.18 -160.17.40-5N

R335.18 -080.20.22-4N R335.18 -100.20.27-5N R335.18 -125.20.32-6N 335.18 -125.20.40-6N 335.18 -160.20.40-7N R335.18 -160.20.40-7N

80100125125160160

dmm

222732404040

E

–––20–20

–––2020–

l 2

––––––

lp

––––––

l 3

20–––––

17–––––

9912121515

121518182121

Zc*

334455

456677

0,61,11,41,01,92,0

0,61,11,51,22,32,6

1050094008400840075007500

l 1

505050–50–

505050––50

ar 1

20–––––

lc

––––––

M

––––––

D 5 m

404858557055

404858555570

Width 17-20 - Full side

Type A for milling arbor - Fixed pockets (Type A FP)

Please check availability in our current price and stock-list

Trang 37

R335.18 -080.1416.27-3N**

-100.1416.27-4N**

-125.1418.40-4N 335.18 -125.1418.40-4N R335.18 -160.1418.40-6N 335.18 -160.1418.40-6N R335.18 -200.1418.40-7N 335.18 -200.1418.50-7N R335.18 -250.1418.60-9N 335.18 -250.1418.50-9N R335.18 -315.1418.60-12N 335.18 -315.1418.50-12N

R335.18 -080-1820.27-3N**

-100.1820.27-4N**

-160.1924.40-5N 335.18 -160.1924.40-5N R335.18 -200.1924.40-6N 335.18 -200.1924.50-6N R335.18 -250.1924.60-8N 335.18 -250.1924.50-8N R335.18 -315.1924.60-10N 335.18 -315.1924.50-10N

R335.18 -160.1924.40-5N-15H 335-18 -160.1924.40-5N-15H R335.18 -200.1924.40-6N-15H 335.18 -200.1924.50-6N-15H R335.18 -250.1924.60-8N-15H 335-18 -250.1924.50-8N-15H R335.18 -315.1924.60-10N-15H 335.18 -315.1924.50-10N-15H

R335.18- 160.1924.40-5N-16C 335.18 -160.1924.40-5N-16C R335.18 -200.1924.40-6N-16C 335.18 -200.1924.50-6N-16C R335.18 -250.1924.60-8N-16C 335.18 -250.1924.50-8N-16C R335.18 -315.1924.60-10N-16C 335.18 -315.1924.50-10N-16C

132444505260588590110

43505360578590110

80100125125160160200200250250315315

80100160160200200250250315315

162162202202252252317317

160160200200250250315315

dmm

272740404040405060506050

27274040405060506050

4040405060506050

E/l 2

–––18–18–18–18–18

–––24–24–24–24

–24–24–24–24

D 5 m

48487056705690711307113071

4848705690711307113071

705690711307113071

68881212141418182424

681010121216162020

1010121216162020

Zc*

34446677991212

345566881010

5566881010

0,71,11,71,02,71,54,12,07,53,09,54,0

0,82,03,02,04,52,58,03,510,04,5

3,05,04,52,58,03,510,04,5

3,02,04,52,58,03,510,04,5

980088007800780069006900610061005500550049004900

8400760052005200470047004200420037003700

52005200470047004200420037003700

335,18-1005335,18-1005335,18-1005335,18-1005335,18-1005335,18-1005335,18-1005335,18-1005335,18-1005335,18-1005335,18-1005335,18-1005

335,18-1305335,18-1305335,18-1305335,18-1305335,18-1305335,18-1305335,18-1305335,18-1305335,18-1305335,18-1305

AC 1506R/LAC 1506R/LAC 1506R/LAC 1506R/LAC 1506R/LAC 1506R/LAC 1506R/LAC 1506R/L

AP 1604R/LAP 1604R/LAP 1604R/LAP 1604R/LAP 1604R/LAP 1604R/LAP 1604R/LAP 1604R/L

l 1 /l p

505050–50–50–50–50–

555550–50–50–50–

51,5–51,5–51,5–51,5–

For insert selection and cutting datarecommendations, see page 62–63, 65.

Trang 38

R335.18 -200.2530.60-6N 335.18 -200.2530.50-6N R335.18 -250.2530.60-8N 335.18 -250.2530.50-8N R335.18 -315.2530.60-10N 335.18 -315.2530.60-10N

R335.18 -200.2530.60-6N-15H 335.18 -200.2530.50-6N-15H R335.18 -250.2530.60-8N-15H 335.18 -250.2530.50-8N-15H R335.18 -315.2530.60-10N-15H 335.18 -315.2530.60-10N-15H

R335.18 -200.2530.60-6N-16C 335.18 -200.2530.50-6N-16C R335.18 -250.2530.60-8N-16C 335.18 -250.2530.50-8N-16C R335.18 -315.2530.60-10N-16C 335.18 -315.2530.60-10N-16C

3360588590110

200200250250315315

202202252252317317

200200250250315315

dmm

605060506060

E/l 2

–30–30–30

D 5 m

130711307113085

121216162020

Zc*

66881010

4,53,08,54,011,05,0

400040003600360032003200

335,18-1606335,18-1606335,18-1606335,18-1606335,18-1606335,18-1606

AC 1506R/LAC 1506R/LAC 1506R/LAC 1506R/LAC 1506R/LAC 1506R/L

AP 1604R/LAP 1604R/LAP 1604R/LAP 1604R/LAP 1604R/LAP 1604R/L

l 1 /l p

50–50–50–

The cutter is set to the minimum cutter width 24,3/24,5/25 mm +/-0,02 mm

Type B for stub arbor (Type B adj)

Type A for milling arbor (Type A adj)

A cutter may be ordered with the cutting width set to any value within its range,

see page 50 for more information

For insert selection and cutting datarecommendations, see page 62–63, 65.

Trang 39

R335.29 -1240.RE-06.6N-R3 -1650.RE-06.8N-R3

R335.29 -1650.RE-08.6N-R4 -063-08.22.8N-R4 335.18 -100.0810.27-8N-R4 R335.18 -100.0810.27-8N-R4 335.18 -125.0810.40-10N-R4 R335.18 -125.0810.32-10N-R4 335.18 -160.0810.40-12N-R4 R335.18 -160.0810.40-12N-R4 335.18 -200.0810.50-16N-R4 R335.18 -200.0810.40-16N-R4 335.18 -250.0810.50-18N-R4

R335.29 -063-10.22.6N-R5 -080-10.27.8N-R5 R335.18 -080.1012.27-3N-R5 -100.1012.27-4N-R5 335.18 -100.1012.27-4N-R5 R335.18 -125.1012.32-5N-R5 335.18 -125.1012.40-5N-R5 R335.18 -160.1012.40-6N-R5 335.18 -160.1012.40-6N-R5 R335.18 -200.1012.40-8N-R5 335.18 -200.1012.50-8N-R5 -250.1012.50-9N-R5

5063100100125125160160200200250

638082102102127127162162202202252

dmm

––

–22272740324040504050

222727272732404040405050

E

––

––15–15–15–15–15

––––15–15–15–1515

D 5 m

2330

3040414155555555696969

404048484158557055906969

M

M12M16

M16––––––––––

––––––––––––

68

688810101212161618

6868810101212161618

Zc*

68

688810101212161618

683445566889

0,20,2

0,20,50,20,50,81,01,01,21,72,03,0

0,50,60,60,80,41,10,61,71,13,11,82,9

3370030200

2020017000940094008400840075007500670067006000

135001200010500940094008400840075007500670067006000

RD 06RD 06

RD 08RD 08RD 08RD 08RD 08RD 08RD 08RD 08RD 08RD 08RD 08

RD 10T3RD 10T3RD 10T3RD 10T3RD 10T3RD 10T3RD 10T3RD 10T3RD 10T3RD 10T3RD 10T3RD 10T3

l 1

3035

3580–48–58–70–90–

50505050–50–50–50––

Cutters 335.29 and 335.18 with round inserts 06/08/10 Width 6–12 – Full radius profiling

For insert selection and cutting datarecommendations, see page 57–59.

Trang 40

R335.18 -080.1215.27-3N-R6 -100.1215.27-4N-R6 335.18- 100.1215.27-4N-R6 R335.18 -125.1215.32-5N-R6 335.18 -125.1215.40-5N-R6 R335.18 -160.1215.40-6N-R6 335.18 -160.1215.40-6N-R6 R335.18 -200.1215.40-8N-R6 335.18 -200.1215.50-8N-R6 -250.1215.50-9N-R6

R335.18 -125.1418.40-4N-R8 335.18 -125.1418.40-4N-R8 R335.18 -160.1418.40-6N-R8 335.18 -160.1418.40-6N-R8 R335.18 -200.1418.40-7N-R8 335.18 -200.1418.50-7N-R8 R335.18 -250.1418.60-9N-R8 335.18 -250.1418.50-9N-R8 R335.18 -315.1418.60-12N-R8 335.18 -315.1418.50-12N-R8

130130165165205205255255320320

dmm

27272732404040405050

40404040405060506050

E

––15–15–15–1515

–18–18–18–18–18

D 5 m

48484158557055906969

7056705690711307113071

M

––––––––––

68810101212161618

881212141418182424

Zc*

3445566889

446677991212

0,70,90,51,10,71,91,83,32,23,6

1,71,02,71,54,12,07,53,09,54,0

10500940094008400840075007500670067006000

7800780069006900610061005500550049004900

RP 1204RP 1204RP 1204RP 1204RP 1204RP 1204RP 1204RP 1204RP 1204RP 1204

RP 1605RP 1605RP 1605RP 1605RP 1605RP 1605RP 1605RP 1605RP 1605RP 1605

l 1

5050–50–50–50––

50–50–50–50–50–

16,0316,5017,0018,0018,50

000,020,060,10

12,0312,5013,0014,0015,00

00,010,020,080,19

Cutter 335.18 with round inserts 12/16 Width 12–16 – Full radius profiling

Round 16, recommended minimum cutter setting width is 16,03 mm

Profile machined with round inserts

ap mmm Profile height H mm

Round 12, recommended minimum cutter setting width is 12,03 mm

Please check availability in current price and stock-list

Type B for stub arbor (Type B adj)

Type A for milling arbor (Type A adj)

ap min

ap max

ap min

ap max For insert selection and cutting datarecommendations, see page 60–61.

For complete insert programme, see page 73–74.

Tiêu đề	Disc Milling New Catalogue 07 Dao Phay CNC
Trường học	Fagersta University
Chuyên ngành	Manufacturing Engineering
Thể loại	catalogue
Năm xuất bản	2007
Thành phố	Fagersta

Định dạng
Số trang	86
Dung lượng	3,36 MB