Times New Roman font, and alignment double left and right justified.. bold Arial font, and align-ment double left and right justified.. bold Arial font using small caps, and alignment do
Trang 1OPTOELECTRONICS LETTERS Vol.XX No.X, date
Instructions for the preparation of a manuscript for
AUTHOR ONE (作作作) 1,2 **, AUTHOR TWO (作作作) 1 , AUTHOR THREE (作作作) 1
1.Changchun Institute of Optics, Fine Mechanics and Physics, Chinese Academy of Sciences, Changchun 130033, China
2.University of Chinese Academy of Sciences, Beijing 100059, China 1
(Received XXXXX; Revised XXXXX)
©Tianjin University of Technology and Springer-Verlag Berlin Heidelberg 2017
The abstract should be in 9-pt Times New Roman font, and alignment double (left and right) justified Indent left and right margins 2.5 characters (0.925 cm) The abstract should be limited to approximately 100 words It should be an explicit summary of the paper that states the problem, the methods used, and the major results and conclusions It also should contain the relevant key words that would allow it to be found in a cursory computerized search Do not include equations inside the abstract The use of complete and properly formatted references is particularly important Adher-ence to these guidelines will significantly expedite the production of your paper.
Document code: A Article ID: XXXX-XXXX(XXXX)XX-XXXX-X
DOI XX.XXXX/XXXXXX-XXX-XXXX-X
Adherence to the specifications listed in this style guide
is essential for efficient review and publication of
sub-missions
Optoelectronics Letters accepts Word style
submis-sions The express journal style and layout rules have
been followed in this guide
1 Page layout and length
Paper size should be A4, 21 cm x 29.7 cm The
mar-gins for articles published in Optoelectronics Letters are
3.5 cm (top), 1.7 cm (bottom), and 2 cm (left and right)
Please ensure that these margins are set for the whole
document
The manuscript page length for journal article is
lim-ited in 5 pages
2 Typographical style
The title, author listing, captions for figures and tables
and all headers should be in Arial font The rest of the
text and body of the article should be Times New
Ro-man
2.1 Title
The title should be in 18-pt bold Arial font, and
align-ment double (left and right) justified The line space
should be 20-pt Use initial cap for first word in title or
for proper nouns The title will have an asterisk in the
end correlating to the foundations at the footnotes of the
page
2.2 Author names
Please leave one blank line between the title and
au-thor names The abstract should be in 9-pt bold Arial
font using small caps, and alignment double (left and
right) justified Indent left and right margins 2.5
charac-ters (0.925 cm) Lines should be single-spaced
Author names should appear as used for conventional publication, with first and middle names or initials fol-lowed by surname
2.3 Author affiliations All authors and affiliations should be styled in 9-pt italic Times New Roman font If all authors share one af-filiation, superscript numbers are not needed The corre-sponding author will have two asterisks correlating to an email address marked at the footnotes of the page All authors must be grouped together using superscripts to callout each affiliation Hard returns (Enter key) must be used to separate each individual affiliation Abbrevia-tions should not be used Please include the country at the end of the affiliation
2.4 Main text Please leave two blank lines between the DOI and main text The line space of main text should be 12-pt The first line of the first paragraph of a section or sub-section should start flush left The first line of subsequent paragraphs within the section or subsection should be in-dented one characters (0.37 cm) All main text should be alignment double (left and right) justified
The main text should in 9-pt Times New Roman font 2.5 Figures and tables
Please leave one blank line before and after each fig-ure and table Place figfig-ures and tables as closely as possi-ble to where they are mentioned in the text
Figures must be inserted as objects that are fixed and move with the text, not as floating objects Figures should never be placed in a table environment, embedded inside the text, or included within a list All the figures should be centered
Na-tional Science and Technology Major Project of China (No XXXXXXXXXX).
** E-mail: oel@263.net
Trang 2· XXXX · Optoelectron Lett Vol.XX No.X
All figure captions should be centered beneath the
fig-ure Longer figure captions should be centered beneath
the figure and alignment double (left and right) justified,
but are not to exceed the left and right edge of the main
text
The abbreviation “Fig.” for figure should appear first
followed by the figure number and a period Captions
should be in 9-pt bold Arial font Half line of space
should be left between the figure and the caption
The resolution of grey-scale and color figure should be
150-225 dpi; and the resolution of bitmap should be
600-900 dpi
Fig.1 Sample caption
Authors must use Word’s Table editor to insert tables
Authors must not import tables from Excel Tables
should use horizontal lines to delimit the top and bottom
of the table and column headings
All table captions should be centered above the table
Longer table captions should be centered above the table
and alignment double (left and right) justified, but are
not to exceed the left and right edge of the main text
The abbreviation “Tab.” for table should appear first
followed by the table number and a period Captions
should be in 9-pt bold Arial font Half line of space
should be left between the table and the caption The
content in the table should be in 8-pt Times New Roman
font
2.6 Equations
This journal do not accept equations built using the
Word 2007 or 2010 Equation Builder All display
equa-tions should be created in MathType (or the Microsoft
Equation editor from Design Science) Inline equations
can be created with these tools or by using keyboard and
Unicode characters where needed for the best quality line
spacing We strongly encourage authors to use
MathType 6.7
Equations should be indented one characters (0.37
cm), and equation numbers should appear at the
right-hand margin, in parenthesis For long equations, the
equation number may appear on the next line For very
long equations, the right side of the equation should be
broken into approximately equal parts and aligned to the
right of the equal sign The equation number should
ap-pear only at the right hand margin of the last line of the
equation:
(1) All equations should be numbered in the order in which they appear and should be referenced from within the main text as Eq (1)
2.7 References References should appear at the end of the article, in the order in which they are referenced in the body of the paper (see below) The words “References” should be in 10-pt bold Arial font, double-spaced and alignment dou-ble (left and right) justified The content below should in 9-pt Times New Roman font The line space should be 12-pt All references should be hanging indented 0.74
cm
This journals use numerical notation in brackets for bibliographic citations At the point of citation within the main text, designate the reference by typing the number
in after the last corresponding word [1] Reference num-bers should precede a comma or period [2] Two refer-ences [3,4], should be included together, separated by a comma, while three or more consecutive references should be indicated by the bounding numbers and a short dash [1–4]
References
Journal
[1] OJALA T, PIETIKAINEN M, MAENPAA T Multireso-lution gray-scale and rotation invariant texture classifica-tion with local binary patterns [J] IEEE transacclassifica-tions on pattern analysis and machine intelligence, 2002, 24(7) 作 971-987
Book
[2] YARIV A, YEH P Optical electronics in modern commu-nications [M] Chen H M, Shi W H, Wang J L, et al, Transl 6th ed Beijing作Electronic Industry Press, 2014作 5-28
[3] DHAKAD S K, DWIVEDI U, BAUDHA S, et al Perfor-mance improvement of fractal antenna with electromag-netic band gap (EBG) and defected ground structure for wireless communication [M]//Gnanagurunathan G, Sangeetha R, Kiran K Optical and microwave technolo-gies Lecture Notes in Electrical Engineering, Singapore作 Springer, 2018, 468作9-19
Conference Papers
[4] CHEN S T, CHENG J H, GAO W A phase modulation method for improving the scale factor stability of fiber-optic gyroscope [C]//Proceedings of 2008 IEEE Interna-tional Conference on Mechatronics and Automation, Au-gust 5-8, 2008, Takamatsu, Japan New York 作 IEEE,
2008, 978作37-42
[5] KORN G, LEGARREC B, RUS B ELI extreme light in-frastructure science and technology with ultra-intense laser [C]//2013 Conference on Lasers and Electro-Optics (CLEO), June 9-14, 2013, San Jose, CA, USA New
Trang 3OPTOELECTRONICS LETTERS Vol.XX No.X, date
York作IEEE, 2008, 14381056
[6] BOULLET J, DUBRASQUET R, BELLO-DOUA R.
High average power, high energy fiber laser system
作op-eration at 977 nm and frequency doubling at 488 nm
[C]//Advanced Solid-State Photonics 2010, January
31-February 3, 2010, San Diego, California, United States.
Washington作Optical Society of America, 2010作AwA5
Standard
[7] Information and documentation-the Dublin core metadata
element set 作 ISO 15836 作 2009 [S/OL] [2013-03-24].
http 作 //www.iso.org/iso/home/store/catalogue_tc/
cata-logue_detail.htm? csnumber=52142
Patent
[8] LIU J L Multi-functional disposable tongue spatula 作
CN92214985.2 [P] 1993-04-14
[9] TACHIBANA R, SHIMIZU S, KOBAYSHI S, et al.
Electronic watermarking and system 作 US6915001 [P/
OL] 2005-07-05[2013-11-11] http 作 //
www.google.co.in/patents/US6915001
Report
[10] World Health Organization Factors regulating the
im-mune response 作 report of WHO Scientific Group [R].
Geneva作WHO, 1970作66
Network literature
[11] Dublin core metadata element set 作version 1.1 [EB/OL].
(2012-06-14) [2014-06-11] http 作
//dublincore.org/docu-ments/dces/