® S tr ADC’s TrueNet® Category 6 patch panels, patch cords, modular jacks, and cable form an end-to-end channel optimized to preserve signal amplitude and deliver zero bit error performa
Trang 1® S tr
Copper Connectivity Solutions –
Category 6
Introduction 96
Patch Panels 97
Termination Blocks 102
Patch Cords 107
Modular Jacks 111
Trang 2® S tr
ADC’s TrueNet® Category 6 patch panels, patch cords, modular jacks, and cable form an end-to-end channel optimized to preserve signal amplitude and deliver zero bit error performance
in Gigabit Ethernet applications
TrueNet patch panels are manufactured in 24-port (1RU) or 48-port (2RU) configurations to provide high-density modular patching solutions for all high-density applications where space is limited
The LSA-PLUS® IDC technology provides a secure, reliable and gas-tight connection and allows for the wire to be terminated with either a KRONE insertion tool or a 110 termination tool.
ADC Ultim8™ and HighBand® 25 blocks provide unparalleled patching and testing capabilities that provide ultimate flexibility in deploying a network
HighBand 25 and Ultim8 blocks provide a cross-connection system with greater density, front side termination and fewer patch cords There are multiple mounting options available to support both rack and wall mount application to maximize your telecommunications room real estate requirements.
The Ultim8 and HighBand 25 blocks also feature
a unique center port that acts as a test port to provide “look-both-ways” testing capability without the removal of any wire This port also allows simple circuit monitoring through use of a test cord.
TrueNet Category 6 products deliver exceptional system performance by including features that protect signal integrity and strength The IEEE specifications for signal amplitude are especially important for Gigabit Ethernet (which uses multilevel encoding)
In addition, these features may also enable lower voltage NIC cards to transmit a clean signal.
TrueNet® Category 6 solutions deliver:
• A complete end-to-end channel
• Extra bandwidth, better attenuation
• Zero bit errors
• ISO/IEC 11801, Class E compliance
• Category 6 complia100
Introduction
Hub Switch
Patch Cord KM8
Jacks
Category 6 Patch Panel
TrueNet® Category 6 RJ45 Modular Solution
Hub Switch
Patch Cord KM8
Jacks
Blocks
TrueNet® Category 6 IDC Block Solution
Mismatched Signal Amplitude
The mismatched channel allows signal amplitude to fall out of IEEE specifications TrueNet® Signal Amplitude
The TrueNet channel preserves signal amplitude within IEEE specifications
Time
Time
Trang 3® S tr
Patch Panels
TrueNet® Category 6 patch panels feature
impedance matching for maximum performance
Designed for mounting in standard EIA 19-inch
racks or to hinged wall mount brackets, their high
density, superior reliability and numerous labeling
options make these patch panels a superior
choice for high-performance networks.
Features and Benefits
• UL certified and verified
• Performance exceeds TIA/EIA
Category 6 requirements
• Designed to support Gigabit Ethernet
transmission speeds
• Includes rear wire manager
• Wire can be terminated with either
a KRONE or 110 tool
• 45 degree silver-plated IDCs provide secure,
reliable gas-tight connection
• Includes paper labels or silk-screened
area for station identification
• Universal wiring label for easy termination of
either T568A/B
®
24-port Category 6 patch panel A/B
48-port Category 6 patch panel A/B
24-port Category 6 patch panel, paper labels A/B
48-port Category 6 patch panel, paper labels A/B
Ordering information follows on the next page
Trang 4® S tr
O r d e r i n g I n f o r m a t i o n
Description Dimensions (HxWxD) Catalog Number 24-port silk-screened, T568A/B compatible
Quantity: 1
48-port silk-screened, T568A/B compatible
Quantity: 1
24-port patch panel with snap-in port ID tabs
and paper labels, T568A/B compatible Quantity: 1
48-port patch panel with snap-in port ID tabs
and paper labels, T568A/B compatible Quantity: 1
Blank panels
Used to cover open rack space in 19" rack; rolled steel construction; durable powder coated finish
Quantity: 1
1RU 2RU
6-port mini patch panel, Type 568A/B; mounts
on UMS bracket, Type 105 rod mount or Type 105
back mount frame Quantity: 1
1.75" x 19" x 1.5"
(44.45mm x 482.6mm x 38.1mm) 3.5" x 19" x 1.5"
(88.9mm x 482.6mm x 38.1mm) 1.75" x 19" x 1.5"
(44.45mm x 482.6mm x 38.1mm) 3.5" x 19" x 1.5"
(88.9mm x 482.6mm x 38.1mm)
1.75" x 19" x 0.25"
(44.45mm x 482.6mm x 6.35mm) 3.5" x 19" x 0.25"
(88.9mm x 482.6mm x 6.35mm) 1.73" x 4.77" x 2.08"
(43.94mm x 121.16mm x 52.83mm)
6653 1 677-24
6653 1 677-48
6653 1 679-24
6653 1 679-48
6653 2 000-01
6653 2 000-02
6653 1 608-00
Patch Panels
®
Trang 5® S tr
Patch Panels
Dynamic Angle Right/Left Patch Panels
The TrueNet® dynamic angle right/left panel offers superior performance and flexibility Unlike fixed
angle right/angle left panels, ADC’s patented solution combines the ability to dynamically angle
connections either right or left in a low profile Forty-five degree silver plated IDCs can be punched
down with either a standard 110 or KRONE termination tool.
Features
• Patented angle right/left eases stress on
patch cords allowing for improved cable management
• Low profile dynamic angling allows for
greater flexibility and use in cabinet envi-ronments
• UL 1863 certified and Category 6
performance verified
• Conductors can be terminated with either a
KRONE or 110 tool
• 45 degree silver-plated IDCs provide secure,
reliable gas-tight connection
• Includes adhesive paper labels for station identification
• Universal wiring label for easy termination
of either T568A/B
• Patch panels are designed to support Gigabit Ethernet transmission speeds
• Panels can be rack mounted in standard EIA 19-inch racks or wall mounted using optional 19-inch hinged wall mount brackets
• Optional rear cable manager available
O r d e r i n g I n f o r m a t i o n
Description Dimensions (HxWxD) Catalog Number
24-port angle right/left patch panel, 1.75" x 19" x 1.5" PP24AC6T
T568A/B compatible Quantity: 1 (44.45mm x 482.6mm x 38.1mm)
48-port angle right/left patch panel, 3.5" x 19" x 1.5" PP48AC6T
T568A/B compatible Quantity: 1 (88.9mm x 482.6mm x 38.1mm)
Rear cable management bar 1.75" x 19" x 4" ADCCMR-A
Label holder ADCLH-A
Adhesive-backed, clear top loading label holder
Sheet (8.5" x 11") of label cards
ID tabs (icons) ADCICBXX*
Quantity: 25 per bag
*Replace XX with:
03 = Red 05 = Blue 09 = Yellow 11 = Brown
04 = Green 08 = Orange 10 = Purple
®
Trang 6® S tr
Plug ‘n’ Play Patch Panels Patch Panels
Part of ADC’s high performance line of modular products, these blank patch panels accept all the modular jacks and connectors available for ADC’s station outlets The patch panels are designed to mount in standard EIA 19-inch (482.6mm) racks.
24-port high-density Plug ‘n’ Play patch panel
with 6-port increments Patch Plus 24-port, six 4-port increments (front)
12-port mini patch panel
24-port high-density Plug ‘n’ Play patch panel
with 4-port increments
48-port high-density Plug ‘n’ Play patch panel
with 4-port increments
Ordering information follows on the next page
Trang 7® S tr
O r d e r i n g I n f o r m a t i o n
Description Dimensions (HxWxD) Catalog Number
24-port Patch Plus panel 3.5" x 19" x 1.5" 6653 2 760-24
Attaches to wall mount brackets or standard
TIA/EIA racks Includes wire management
on front and back; compatible with both
KM8 and K610 jacks Includes station,
workstation and panel identification labeling
capabilities
High-density Plug ‘n’ Play patch panel
Quantity: 1
Includes rear cable management Front of
panel is silk-screened with port numbers
and label area Adhesive labels for laser
printing also available (contact ADC
Technical Assistance Center)
24-port panel, 4-port increments 1.75" x 19" x 6" 6653 2 102-24
48-port panel, 4-port increments 3.5" x 19" x 6" 6653 2 102-48
24-port panel, 6-port increments 1.75" x 19" x 6" 6653 2 104-24
12-port mini patch panel 10" x 2.75" x 1.88" 6653 2 705-12
Blank mini patch panels accept all modular
jacks and connectors available for ADC’s
station outlets Includes (1) 89D bracket
Label sheets for 4-port increment 6631 3 046-08
panels Quantity: 1 sheet
Contains labels for 4-port Fascia, 4-port
Patch Plus, Plug ‘n’ Play Patch Plus
Plug ‘n’ Play Patch Panels
Patch Panels
Trang 8® S tr
Features
• UL certified
• Performance exceeds TIA/EIA Category 6
• Designed to support Gigabit Ethernet transmission speeds
• A test port provides “look-both-ways”
testing capability without the removal
of any wires; also allows simple circuit monitoring through use of a test cord
• Provide unique patch-by-exception functionality
O r d e r i n g I n f o r m a t i o n
Description Dimensions (HxWxD) Catalog Number Ultim8 ™ block Quantity: 1
8-pair; color-coding for station pairs printed on
face of block Includes wire guides and jumper rings Three mounting options: snap onto universal mounting bracket in Type 105 position; a Type 105 mounting bracket; Type 105 rod mount bracket
0.88" x 4.88" x 1.63"
(22.5mm x 124mm x 41.4mm)
6468 2 060-06
Ultim8™ block
®
Adjustable Mounting Bracket (in Type 105 position)
Horizontal Wire Managers
Type 105 Label Holder 8-Pair Block
Type 105 Label Strip
Termination Blocks
Tech Tip
Patch-by-exception improves performance and aesthetics The advantages of HighBand® 25 and Ultim8™ blocks provide a cross-connection system with greater density, front side termination and fewer patch cords
To learn more about patch-by-exception, contact ADC Technical Support
Trang 9® S tr
O r d e r i n g I n f o r m a t i o n
Description Dimensions (HxWxD) Catalog Number
Ultim8 ™ field assembly kit Quantity: 1
96-pair Ultim8™ kit with UMS 160-pair Ultim8™ kit
96-pair (24-port)
Supports field termination of (24) 4-pair cables
Includes (12) Ultim8 blocks, (2) horizontal wire
managers, (1) black or gray universal mounting
bracket and (1) Type 105 label holder with label
and protective cover
96-pair (24-port) kit; including black universal
mounting kit
96-pair (24-port) kit; including gray universal
mounting kit
160-pair
Supports field termination of (40) 4-pair
cables Includes (20) Ultim8 blocks, (1) Type 105
label holder, (1) 21-position Type 105 back mount
frame, protective rubber grommets for rear cable
entry holes on back mount frame
168-pair
Supports field termination of (40) 4-pair cables
Includes (21) Ultim8 blocks, (1) 21-position
Type 105 back mount frame, protective rubber
grommets for rear cable entry holes on back
mount frame No label holder
14.75" x 8.25" x 5.25"
(374.7mm x 209.6mm x 33.4mm)
18.44" x 4.25" x 3.81"
(468.3mm x 107.9mm x 96.8mm)
18.44" x 4.25" x 3.81"
(468.3mm x 107.9mm x 96.8mm)
6636 1 596-46
6636 1 596-06
6636 1 510-06
6636 1 518-06
Termination Blocks
®
Trang 10® S tr
Complete 300-pair HighBand® 25 system includes back mount frame and HighBand 25 blocks with rear cable managers, patch cords, cable management rings and covers (single on left side, dual on right side) and a cable trough added below
HighBand® 25 block rear cable manager HighBand® 25 label holder (shown mounted on block)
HighBand® 25 back mount frame
®
Features and Benefits
• UL certified
• 25-pair blocks for voice and data applications (first 24 pair for data)
• Performance exceeds TIA/EIA Category 6 requirements
• A test port provides “look-both-ways” testing capability without the removal of any wires;
also allows simple circuit monitoring through use of a test cord
• Features disconnect contacts providing unique patch-by-exception functionality and improved administration
• Available as individual components or in complete systems, consisting of unique wire termination blocks, cable managers, patch cords, mounting frames, label holders and covers
Termination Blocks
Ordering information follows on the next page Tech Tip
When installing HighBand® 25 blocks, it is easier to begin wire termination at the bottom and work up the mounting hardware
Trang 11® S tr
O r d e r i n g I n f o r m a t i o n
Description Dimensions (HxWxD) Catalog Number
HighBand ® 25 25-pair block systems
300-pair basic system
Consists of (1) back mount frame, (12) 25-pair
HighBand 25 blocks and (12) label holders Patch cords,
optional cable troughs, cable management rings, covers
ordered separately
20.75" x 7.88" x 8.5"
(528mm x 200mm x 215.9mm)
6450 1 101-00
900-pair basic system
Consists of (3) back mount frames, (36) 25-pair
HighBand 25 blocks, (36) label holders Patch cords,
optional cable troughs, cable management rings, covers
ordered separately
62.25" x 7.88" x 8.5"
(1581.2mm x 200mm x 215.9mm)
6450 1 102-00
300-pair cable management kit
Includes (2) dual cable management rings
and (1) dual cover
20.6" x 8.62" x 8.6"
(523mm x 219mm x 218.5mm)
6450 1 103-00
900-pair cable management kit
Includes (6) dual cable management rings
and (3) dual covers
61.8" x 8.62" x 8.6"
(1569.7mm x 219mm x 218.5mm)
6450 1 104-00
HighBand 25 block with rear cable manager
Color-coded; terminates (6) 4-pair Category 6 cables
Rear cable manager simplifies installation; incoming cables
routed through slots and held securely by built-in clips
Quantity: 12
1.7" x 8.5" x 4.5"
(43.2mm x 215.9mm x 114.3mm)
6468 5 600-00
HighBand 25 25-pair voice module
with rear cable manager Quantity: 12
1.7" x 8.5" x 4.5"
(43.2mm x 215.9mm x 114.3mm)
6468 5 300-00
Termination Blocks
Ordering information continues on the next page
Trang 12® S tr
Description Dimensions (HxWxD) Catalog Number
Single: Use when space is limited or additional cable
manager required
HighBand ® 25 19" (482.6mm) rack mount frame
Quantity: 1
2.5" x 8.5" x 8.25"
(63.5mm x 140.3mm x 209.6mm)
6450 2 156-01
Dual: Position between 2 frames
2RU—100-pair 3RU—200-pair 4RU—300-pair
6450 1 176-00
6450 1 177-00
6450 1 178-00
2.5" x 5.5" x 8.25"
(63.5mm x 215.9mm x 209.6mm)
6450 2 158-02
HighBand ® 25 cable management rings
Quantity: 2
Termination Blocks
O r d e r i n g I n f o r m a t i o n
HighBand ® 25 label holder
Clips into position in three locations, providing secure fit
without disrupting patching Quantity: 12
0.47" x 8.5" x 0.3"
(11.9mm x 215.9mm x 7.6mm)
6462 2 408-00
HighBand ® 25 back mount frame
High-grade stainless steel; extra deep frame supports strict Category 6 bend radius require-ments; Velcro tie points allow neat installation
and ease of cable routing Quantity: 1
20.8" x 7.87" x 4.38"
(529mm x 200mm x 111.3mm)
6450 2 155-00
HighBand ® 25 cable trough
Mounts on top or bottom of each back mount frame;
provides superior patch cord management
Quantity: 1
5.9" x 7.87" x 8.6"
(150mm x 200mm x 218.5mm)
6450 2 157-00