1. Trang chủ
  2. » Công Nghệ Thông Tin

Tài liệu Microsoft Training and Certification docx

14 388 0
Tài liệu đã được kiểm tra trùng lặp

Đang tải... (xem toàn văn)

Tài liệu hạn chế xem trước, để xem đầy đủ mời bạn chọn Tải xuống

THÔNG TIN TÀI LIỆU

Thông tin cơ bản

Tiêu đề Designing B2B Integration Solutions
Thể loại Course materials
Năm xuất bản 2001
Định dạng
Số trang 14
Dung lượng 716 KB

Các công cụ chuyển đổi và chỉnh sửa cho tài liệu này

Nội dung

Refer students to the Microsoft Official Curriculum Web page at http://microsoft.com/traincert/training/moc/ for information about curriculum paths.. Inform students about the Microsoft

Trang 1

Contents

Prerequisites 3

Microsoft Official Curriculum 6

Microsoft Certified Professional Program 7

Facilities 9

Introduction

Trang 2

Information in this document, including URL and other Internet Web site references, is subject to change without notice Unless otherwise noted, the example companies, organizations, products, domain names, e-mail addresses, logos, people, places, and events depicted herein are fictitious, and no association with any real company, organization, product, domain name, e-mail address, logo, person, place or event is intended or should be inferred Complying with all applicable copyright laws is the responsibility of the user Without limiting the rights under copyright, no part of this document may be reproduced, stored in or introduced into a retrieval system, or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise), or for any purpose, without the express written permission of Microsoft Corporation Microsoft may have patents, patent applications, trademarks, copyrights, or other intellectual property rights covering subject matter in this document Except as expressly provided in any written license agreement from Microsoft, the furnishing of this document does not give you any license to these patents, trademarks, copyrights, or other intellectual property

 2001 Microsoft Corporation All rights reserved

Microsoft, Windows, BackOffice, BizTalk, FrontPage, Hotmail, PowerPoint, Visual Basic, Visual C++, Visual Studio, and Windows Media are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries

The names of actual companies and products mentioned herein may be the trademarks of their respective owners

Trang 3

Instructor Notes

The Introduction module provides students with an overview of the course

content, materials, and logistics for Course 2420A, Designing B2B Integration Solutions

To teach this course, you need the following materials:

! Delivery Guide

! Trainer Materials compact disc

To prepare for this course, you must:

! Complete the Course Preparation Checklist that is included with the trainer course materials

! Review all design labs and ensure that you understand the goals of the lab

! View the multimedia components of this course and ensure that you understand the placement and purpose of each multimedia component

! Review the modules and ensure that you can complete the demonstrations and practices

Presentation:

30 minutes

Required materials

Preparation tasks

Trang 4

How to Teach This Module

This section contains information that will help you teach this module

Welcome students to the course and introduce yourself Provide a brief overview of your background to establish credibility

Ask students to introduce themselves and provide their backgrounds, product experience, and expectations of the course

Record student expectations on a whiteboard or flip chart that you can reference later in class

Tell students that everything they will need for this course is provided at their desks

Have students write their names on both sides of the name card

Describe the contents of the student workbook and the Student Materials compact disc

Tell students where they can send comments and feedback on this course Demonstrate how to open the Web page that is provided on the Student

Materials compact disc by double-clicking Default.htm in the StudentCD

folder on the Trainer Materials compact disc

Describe the prerequisites for this course This is an opportunity for you to identify students who may not have the appropriate background or experience

to attend this course

Briefly describe each module and what students will learn Be careful not to go into too much detail on this page because the course is introduced in detail in Module 1

Explain how this course will meet students’ expectations by relating the information that is covered in individual modules to their expectations

Explain the Microsoft Official Curriculum (MOC) program

Refer students to the Microsoft Official Curriculum Web page at http://microsoft.com/traincert/training/moc/ for information about curriculum paths

Inform students about the Microsoft Certified Professional (MCP) program and the various certification options

Explain the class hours, extended building hours for labs, parking, restroom location, meals, phones, message posting, and where smoking is or is not allowed

Let students know if your facility has Internet access that is available for them

to use during class breaks

Also, make sure that the students are aware of the recycling program if one is available

Introduction

Course materials

Prerequisites

Course outline

Microsoft Official

Curriculum

Microsoft Certified

Professional program

Facilities

Trang 5

Introduction

! Name

! Company affiliation

! Title/function

! Job responsibility

! B2B e-commerce experience

! BizTalk Server and Commerce Server experience

! Expectations for the course

***************************** ILLEGAL FOR NON - TRAINER USE ******************************

Trang 6

Course Materials

! Name card

! Student workbook

! Student Materials compact disc

! Course evaluation

***************************** ILLEGAL FOR NON - TRAINER USE ******************************

The following materials are included with your kit:

! Name card Write your name on both sides of the name card

! Student workbook The student workbook contains the material covered in

class, in addition to the hands-on lab exercises

! Student Materials compact disc The Student Materials compact disc

contains the Web page that provides you with links to resources pertaining

to this course, including additional readings, review and lab answers, lab files, multimedia presentations, and course-related Web sites

To open the Web page, insert the Student Materials compact disc into the CD-ROM drive, and then in the root directory of the compact disc,

double-click Autorun.exe or Default.htm

! Course evaluation To provide feedback on the course, training facility, and

instructor, you will have the opportunity to complete an online evaluation near the end of the course

To provide additional comments or inquire about the Microsoft Certified Professional (MCP) program, send e-mail to mcp@msprograms.com.

Note

Trang 7

Prerequisites

Business skills:

! Analyze common business practices

! Propose technical solutions to business problems

! Specify technologies required to solve business problems

! Communicate the problems and solutions to management and development teams

Technical skills:

! Knowledge of BizTalk Messaging Services and BizTalk Orchestration Services

! Familiarity with XML and XML protocols

! Familiarity with catalog management using Commerce Server

***************************** ILLEGAL FOR NON - TRAINER USE ******************************

This course requires that you meet the prerequisites that are outlined in the slide Although a detailed knowledge of Microsoft® BizTalk™ Server 2000 and Microsoft Commerce Server 2000 is not required, familiarity with the

functionality and purpose of both products will enhance your learning experience

Trang 8

Course Outline

! Module 1: Introduction to B2B Integration

! Module 2: Conducting Project Research

! Module 3: Organizing Product Information

! Module 4: Designing and Publishing Catalogs

! Module 5: Processing Orders

! Module 6: Designing a Remote Shopping Solution

! Module 7: Using UDDI

! Module 8: Integrating XML Web Services in a B2B Solution

! Module 9: Creating a B2B Integration Design

***************************** ILLEGAL FOR NON - TRAINER USE ******************************

This course contains nine modules Each module contains various lessons, practices, and design labs that enable you to perform a specific task relating to the design of a business-to-business (B2B) trading partner integration solution Module 1, “Introduction to B2B Integration,” introduces the basic concepts and technologies that support a B2B trading partner integration solution

Module 2, “Conducting Project Research,” describes how to assess the organization’s operating environment and then determine options and a course

of action for the organization

Module 3, “Organizing Product Information,” describes a master content source, its benefits, and considerations for organizing content, designing the content source, and establishing a data migration process

Module 4, “Designing and Publishing Catalogs,” discusses the basic components of catalog design, the types of catalog schemas, and considerations for choosing a catalog schema that meets the requirements for your solution Module 5, “Processing Orders,” describes order processing and how BizTalk Server and Commerce Server can process orders for your solution

Module 6, “Designing a Remote Shopping Solution,” describes the remote shopping process on a marketplace Web site and considerations for implementing a remote shopping solution

Trang 9

Module 7, “Using UDDI,” describes the functions of Universal Description, Discovery and Integration (UDDI) in your B2B solution and the considerations for using UDDI as part of your solution

Module 8, “Integrating XML Web Services in a B2B Solution,” describes how you can use Extensible Markup Language (XML) Web services to add value to your B2B integration design

Module 9, “Creating a B2B Integration Design,” describes how to bring all of the parts of the previous modules together in a comprehensive design plan for B2B integration

Trang 10

Microsoft Official Curriculum

! Microsoft Windows Operating System

! Microsoft Office

! Microsoft BackOffice Small Business Server

! Microsoft SQL Server

! Microsoft Exchange

! Microsoft BackOffice Infrastructure and Solutions

! Microsoft FrontPage

! Microsoft Systems Management Server

! Knowledge Management Solutions

***************************** ILLEGAL FOR NON - TRAINER USE ******************************

Microsoft Official Curriculum (MOC) is hands-on facilitated classroom and Web-based training Microsoft develops skills-based training courses to educate computer professionals who develop, support, and implement solutions by using Microsoft products, solutions, and technologies MOC courses are available for the following products and solutions:

! Microsoft Windows® operating systems

! Microsoft Office

! Microsoft BackOffice® Small Business Server

! Microsoft SQL Server™

! Microsoft Exchange

! Microsoft BackOffice Server Infrastructure and Solutions

! Microsoft FrontPage®

! Microsoft Systems Management Server

! Knowledge Management Solutions MOC provides a curriculum path for each product and solution For more information about the curriculum paths, see the Microsoft Official Curriculum Web page at http://www.microsoft.com/traincert/

The Microsoft Official Curriculum Web page provides information about MOC courses In addition, you can find recommended curriculum paths for

individuals who are entering the Information Technology (IT) industry, who are continuing their training on Microsoft products and solutions, or who currently support non-Microsoft products

Trang 11

Microsoft Certified Professional Program

http://www.microsoft.com/trainingandservices/

***************************** ILLEGAL FOR NON - TRAINER USE ******************************

The Microsoft Certified Professional program is a leading certification program that validates your experience and skills to keep you competitive in today's changing business environment The following table describes each certification

in more detail

Certification Description

MCSA on Microsoft

Windows 2000

The Microsoft Certified Systems Administrator (MCSA) certification is designed for professionals who implement, manage, and troubleshoot existing network and system environments based on Microsoft Windows 2000 platforms, including the Windows .NET Server family Implementation responsibilities include installing and configuring parts of the systems Management responsibilities include administering and supporting the systems

MCSE on Microsoft

Windows 2000

The Microsoft Certified Systems Engineer (MCSE) credential is the premier certification for professionals who analyze the business requirements and design and implement the infrastructure for business solutions based on the Microsoft

Windows 2000 platform and Microsoft server software, including the Windows NET Server family Implementation responsibilities include installing, configuring, and troubleshooting network systems

certification for professionals who design and develop leading-edge business solutions with Microsoft development tools, technologies, platforms, and the Microsoft Windows DNA architecture The types of applications MCSDs can develop include desktop applications and multi-user, Web-based, N-tier, and transaction-based applications The credential covers job tasks ranging from analyzing business requirements to maintaining solutions

Trang 12

(continued)

Certification Description

MCDBA on Microsoft

SQL Server 2000

The Microsoft Certified Database Administrator (MCDBA) credential is the premier certification for professionals who implement and administer Microsoft SQL Server databases The certification is appropriate for individuals who derive physical database designs, develop logical data models, create physical databases, create data services by using Transact-SQL, manage and maintain databases, configure and manage security, monitor and optimize databases, and install and configure SQL Server

skills to successfully implement a Microsoft product or technology as part of a business solution in an organization Hands-on experience with the product is necessary to successfully achieve certification

that qualify them to deliver Microsoft Official Curriculum through Microsoft Certified Technical Education Centers (Microsoft CTECs)

Certification Requirements

The certification requirements differ for each certification category and are specific to the products and job functions addressed by the certification To become a Microsoft Certified Professional, you must pass rigorous certification exams that provide a valid and reliable measure of technical proficiency and expertise

See the Microsoft Training and Certification Web site at http://www.microsoft.com/traincert/

You can also send e-mail to mcphelp@microsoft.com if you have specific certification questions

Acquiring the Skills Tested by an MCP Exam

Microsoft Official Curriculum (MOC) and MSDN® Training Curriculum can help you develop the skills that you need to do your job They also complement the experience that you gain while working with Microsoft products and technologies However, no one-to-one correlation exists between MOC and MSDN Training courses and MCP exams Microsoft does not expect or intend for the courses to be the sole preparation method for passing MCP exams Practical product knowledge and experience is also necessary to pass the MCP exams

To help prepare for the MCP exams, use the preparation guides that are available for each exam Each Exam Preparation Guide contains exam-specific information, such as a list of the topics on which you will be tested These guides are available on the Microsoft Training and Certification Web site at http://www.microsoft.com/traincert/

For More Information

Ngày đăng: 24/01/2014, 10:20

TỪ KHÓA LIÊN QUAN

w