TrueNet® HighBand® voice and data cross connect modules ADC KRONE’s HighBand modules provide maximum headroom in transmission performance for LAN and WAN Ethernet traffic whether it be v
Trang 1TrueNet®
HighBand® voice and data cross connect modules
ADC KRONE’s HighBand modules provide maximum headroom in transmission performance for LAN and WAN Ethernet traffic whether it be voice or data Modules can be either patched or jumpered and used in a Patch-by-Exception structured cabling solution.
HighBand utilises the silver plated, world renowned LSA-PLUS®technolgy – trademark by ADC KRONE This technology has become the industry standard in over 60 countries The gas tight contacts ensure a reliable and long lasting connection.
Features:
· Category 5e component compliance.
· Modules can be jumpered or patched (or both).
· Allows user to test/monitor access to a hardwired circuit without disrupting the signal.
· Integrates easily with all of ADC KRONE’s solutions.
· Silver plated LLSA-PLUS®contacts made from superior spring copper alloy.
· Upper and lower shell mouldings made from high quality PBT plastic.
Application and Benefits:
· Offers superior high speed connections for voice and data in backbone cabling.
· Ideal in a Patch-by-Exception solution where more than 100 cross connects are required (8 and 10 pair only).
· Mountable on standard ADC KRONE Profil®mounting frames, backmount frames and 19” backmount style frames.
a d c k r o n e c o m / a u • 1 8 0 0 8 0 1 2 9 8 • h e l p d e s k a u @ a d c k r o n e c o m
Trang 2ADC Telecommunications, Inc., P.O Box 1101, Minneapolis, Minnesota USA 55440-1101 Specifications published here are current as of the date of publication of this document Because we are continuously improving our products, ADC reserves the right to change specifications without prior notice At any time, you may verify product specifications by contacting your local ADC KRONE office ADC Telecommunications, Inc views its patent portfolio as an important corporate asset and vigorously enforces its patents Products or features contained herein may be covered by one or more U.S or foreign patents An Equal Opportunity Employer.
6266 7/05 © 2002, 2004 ADC Telecommunications, Inc All Rights Reserved.
www.adckrone.com/au
AUSTRALIA 2 Hereford Street, Berkeley Vale NSW 2261 Mailing Address: PO Box 335, Wyong NSW 2259, Australia TECH SUPPORT 1800 801 298 helpdesk.au@adckrone.com
www.adckrone.com/nz
NEW ZEALAND 2 Nevis Street, Petone, Wellington Mailing Address: PO Box 38-177, Wellington Mail Centre 6008, New Zealand
High speed voice and data cross connect modules
Specifications
MECHANICAL
Wire range for solid and
200 for patch plugs
*A maximum of 2 equal diameter solid conductors only, of up to 0.5mm conductor diameter can be terminated per slot Only 1 conductor of stranded wires per slot can be terminated If any conductors >0.5mm diameter have been terminated, reversal to smaller conductors is no longer possible
ELECTRICAL
ISO/IEC 11801 Cat 5 ACA Compliant
UL Certified Cat 5 Change of contact interface resistance after
reliability testing to EIA568A and ISO/IEC 11801
per through connection That is, 2 insulation
≥ 0.5kA for patch plugs
ENVIRONMENTAL AND SAFETY
HighBand Compact 8 Pair Disconnection Module (box 10) 6468 5 061-08
Also available switching modules
(not for Patch-by-Exception solutions)
O r d e r i n g I n f o r m a t i o n