Tài liệu Raceway Systems docx

Basic components include horizontal and vertical straight sections, horizontal and vertical elbows, downspouts, junctions, and numerous support hardware and flex tube kits.. By simply se

Trang 1

FiberGuide®Fiber Cable Management

Trang 2

Introduction

The Industry’s Most Comprehensive Optical Raceway System

optic patch cords, multifiber cable assemblies, and intrafacility fiber cable (IFC) to and from fiber splice enclosures, fiber distribution frames, and fiber optic terminal devices The FiberGuide system is designed

to ensure a 2-inch minimum bend radius is maintained throughout the system.

The FiberGuide system is a complete set of products designed and manufactured to ensure total off-frame protection Basic components include horizontal and vertical straight sections, horizontal and vertical elbows, downspouts, junctions, and numerous support hardware and flex tube kits.

The FiberGuide system is available in a variety of sizes:

2x2 — Ideal for smaller installations or for vertical routing into

individual fiber bays It has the trough capacity to support a

maximum of (400) 2 mm fiber optic patch cords All 2x2 FiberGuide

products are shipped with covers.

2x6 — Designed for height-restricted environments, this robust

system provides the same support and system flexibility of the

traditional 4-inch-high system while saving 2 inches of overhead

space It features a maximum capacity of (1,200) 2 mm patch cords.

4x4 — Features the maximum capacity to support (1,600) 2 mm

patch cords It has been engineered to allow straight sections to be

self-supporting over a span of up to 6 feet (1.83 m).

4x6 — Features the same benefits of the 4-inch system and a

maximum trough capacity of (2,400) 2 mm patch cords.

Trang 3

Management System to ensure that it remains the comprehensive

solution for all optical raceway requirements and applications These

new products increase the functionality and flexibility of the

FiberGuide System and are compatible with existing raceway

components.

Snap-Fit Junction

ADC introduces the latest addition to its industry-leading FiberGuide

System The Snap-Fit Junction is the industry’s first and only

completely tool-less junction No additional tools are needed for

installation or removal Quick and easy to install, the FiberGuide

Snap-Fit Junction saves valuable time and money.

Express Exit™

ADC now features three options, the low-profile Express Exit, 2-Inch

Express Exit, and 4-Inch Express Exit in the innovative patented*

Express Exit family to accommodate various raceway environments

and applications By simply securing an Express Exit to the sidewall of

any 4x4, 4x6, or 4x12 FiberGuide straight section, jumpers can be

permanently or temporarily routed to the fiber optic terminal (FOT)

equipment or fiber frames below No cutting of the FiberGuide

system is required Positioning a drop with a member of the Express

Exit family greatly simplifies installation, protects the integrity of fibers

already present in the raceway, and increases the overall flexibility of

the raceway system

2x6 FiberGuide®System

The 2x6 FiberGuide system provides another option to securely route

and protect patch cords Designed for height-restricted environments,

this robust system provides the same support and system flexibility of

the traditional 4x6 system while saving 2 inches of overhead space

A complete set of fittings, straight sections, junctions, and an Express

Exit are available along with adapters to both the 4x4 and

4x6 systems

Raceway Reconfiguration Solutions

ADC introduces two new products to facilitate easy on-site raceway

reconfigurations Available for the 4x4, 4x6, and 4x12 systems, the

cut-in T and the expandable straight section provide the required

flexibility to optimize raceway systems in retrofit applications without

jeopardizing the integrity of existing cables.

*Other patents pending

Express Exit Family

2x6 FiberGuide System

Cut-in TSnap-Fit Junction

Trang 4

Patch Cord Densities

2.0 mm Patch Cords

102

44

Maximum density refers to the maximum number of fiber jumpers in a given cross-section of a FiberGuide

slightly different dimensions than standard patch cords.

Recommended

Patch Cord

Density (per in2)

90

480720960

72010801440

320480640

2x2 FiberGuide System

360

160

3.0

mm

2.0 mm

120

480

1.7 mm

3.0

mm

2.0 mm96014401920

1.7 mm

3.0

mm

2.0 mm144021602880

1.7 mm

216032404320

96014401920

3.0

mm

2.0 mm288043205760

1.7 mm

5287921056

81612241632

352528704

408

176

3.0

mm

2.0 mm

568

3.0

mm

2.0 mm113617042272

1.7 mm

3.0

mm

2.0 mm170425563408

1.7 mm

244836724896

105615842112

3.0

mm

2.0 mm340851126816

1.7 mm

1080

480

3.0

mm

2.0 mm1440

1.7 mm

1224

528

3.0

mm

2.0 mm1704

1.7 mm

Trang 5

6/04

The rigid 2-inch drop option and 2-inch flex tube option are two methods for directing fibers out of

because it offers excellent bend radius control and ensures a quality fiber backbone installation.

2" Flex Tube Drop Option2"x 2" Rigid Drop Option

FGS-MDSP-B 4x6 Downspout FGS-MSHS-B

FGS-MU4A-C*

2x2 45 ° Up Elbow

FGS-MD4A-C*

2x2 45 ° Down Elbow

FGS-HDSI-AB 4x4/4x6 Downspout Insert

FGS-HMEC-B 4x6 End Cap Kit FGS-MSHS-B4x6 Straight Section FGS-MDSP-B4x6 Downspout FGS-MFAW-B

4x6 Junction Assembly FGS-HMEC-B 4x6 End Cap Kit

FGS-MCDS-AB Cover for 4x6 Downspout

FGS-KT03-A1 4x4 End Cap with one 2" Flex Tube, 5' long

FGS-KTW1-C 2x2 Vertical Slotted Duct Kit

*Shown without cover

Applications: Downspout Drop Options

For complete ordering information, please contact ADC or visit www.adc.com

Trang 6

The rigid 2-inch drop option and 2-inch flex tube drop option are two methods for delivering patch cords

vertical transition virtually anywhere along FiberGuide straight sections.

FGS-KTW1-C*

2"x 2" Vertical Slotted Duct Kit

* Shown without Cover

FGS-MD4A-C 2x2 45 ° Down Elbow

FGS-MSHS-B 4x6 Straight Section

FGS-MEX1-C-5F 2" Flex Tube Attachment with 5' of Flex Tube

FGS-MEXP-A/B/F*

Express Exit 2x2

FGS-KTW1-C 2"x 2" Vertical Slotted Duct Kit

* Shown with Cover

Applications: Express Exit™ Drop Options

Trang 7

6/04

The trumpet flare is recommended at the bottom of a downspout when directing fibers into a fiber distribution bay Trumpet flares provide bend radius protection and allow for a large number of fiber patch cords to transition into a fiber bay A 4x4 trumpet flare is used for the 4x4 and 4x6 downspouts and a 4x6 trumpet flare is used for the 4x12 downspout.

FGS-MHRT-F/B 4x12 Horizontal T with single 6" Exit

FGS-MTRM-B 4x6 Trumpet Flare Kit

Applications: Trumpet Flare Options

When attaching a straight section or fitting to the exit of a 4x4 or 4x6 downspout, the FGS-MJWR-A junction must be used This junction is only required to connect the vertical part, the FGS-MFAW

junction can be used to connect the horizontal parts.

FGS-MDSP-B 4x6 Downspout

FGS-MFAW-B 4x6 Junction Assembly (2) FGS-MTRM-A 4x4 Trumpet Flare Kit

Trang 8

and completes installation

ADC’s innovative Cut-in T Fitting and Fixture enable on-site raceway modifications without jeopardizing the integrity of installed fibers Available in 4-, 6-, and 12-inch widths, the cut-in T fitting can be retrofitted

to any installed 4-, 6-, and 12-inch straight section using the cut-in T fixture and the hardware supplied with the fitting No special tools are required.

Applications: Cut-in T and Fitting

Trang 9

6/04

Applications: Expandable Straight Sections

Raceway system with gap between opposing runs

Completed installation

Expandable straight section extends to connect runs

ADC’s Expandable Straight Section simplifies installation and enhances the overall flexibility of the raceway system The innovative straight section also provides an access point for future reconfigurations Available

in 4-, 6-, and 12-inch widths, the expandable straight section reduces the installation time necessary to connect opposing runs and provides continuous support for patch cords.

Trang 10

The 4x12 Island T is designed to be used over the Next Generation Frame (NGF) or FOT storage bay The 4x12 Island T, a horizontal T with spool and factory-installed trumpet flare, channels fiber directly into the vertical cableways below.

4x12 Island T shown installed over an FOT storage bay

Trang 11

2-inch Express Exit

4-inch Express Exit base with base cover

4-inch Express Exit rear cover kit

Rear cover, 4-inch Express Exit – 4x4 system

Low profile Express Exit

O r d e r i n g I n f o r m a t i o n

Catalog Number

FGS-MEXP-A/B/FFGS-MEXP-E-A/B/FFGS-MEXC-E-A/B/FFGS-MEXC-E-AFGS-MEXC-E-BFGS-MEXC-E-FFGS-MEXP-LP-A/B/F

2x2 Fittings and Junctions

Description

2x2 horizontal cross with cover

2x2 horizontal tee with cover

2x2 45º horizontal elbow with cover

2x2 90º horizontal elbow with cover

2x2 to 4-inch straight adapter with cover

2x2 end cap kit (includes junction)

2x2 45º up elbow with cover

2x2 45º down elbow with cover

2x2 90º down elbow with cover

2x2 junction

Catalog Number

FGS-MHXP-CFGS-MHTA-CFGS-MH4A-CFGS-MH9A-CFGS-MDSA-ACFGS-HMEC-CFGS-MU4A-CFGS-MD4A-CFGS-MD9A-CFGS-MJWR-C

2x2 Downspout Options

Description

2x2 standard downspout with cover

2x2 extended downspout with cover

2x2 flex tube attachment with 5-foot length

2-inch flex tube and 2x2 junction

2x2 extended downspout kit with 2-foot length

2-inch flex tube and cover

Dual 7/8-inch flex tube attachment with

(2) 5-foot lengths flex tube and 2x2 junction

Kit of 10 7/8-inch flex tube clamps

Catalog Number

FGS-MSDS-CFGS-MDSP-CFGS-MEX1-C-5FFGS-KDH2-CFGS-KT03-CFGS-HSHC-10

FGS-MSHA-C

Trang 12

2x2 Direct Support Kits

Description

2x2 ladder rack support kit

2x2 bay top short L bracket kit

2x2 bay top long L bracket kit

2x2 digital cableway support kit

2x2 underfloor support kit

Catalog Number

FGS-HLR2-CFGS-BTBS-CFGS-BTBL-CFGS-HDCB-CFGS-HUFB-C

2x2 Track Support Kits

Description

Aluminum track support (6-feet)

New threaded rod kit (5/8-inch)

New threaded rod kit (1/2 -inch)

Track connecting bar kit

Ladder rack bracket kit (5/8-inch)

Threaded rod 12" long

Dual threaded rod bracket kit

Catalog Number

FGS-HASK-CFGS-HTR2-5/8FGS-HTR2-1/2FGS-HAEJ-CFGS-HLDR-5/8FGS-HTHR-5/8-12FGS-HTUB-2-AB

FGS-HLR2-C

FGS-HASK-C

FGS-MSHS-G

Trang 13

4x4 45º horizontal elbow cover

4x4 90º down elbow

4x4 90º down elbow cover

FGS-MDSP-A

4x4 Straight Section

Description

6-foot horizontal straight section

6-foot horizontal straight section hinged cover

4x4 expandable straight section

6-foot horizontal straight section snap-on cover

Catalog Number

FGS-MSHS-AFGS-MSHC-AFGS-MVAR-AFGS-MSSC-A

FGS-MSHS-AFGS-MH9E-A

FGS-MFAW-A

Trang 14

4x4 and 4x6 Downspout Options

Description

4x4 downspout junction kit

2x2 flex tube attachment with 5-foot length

2-inch flex tube and 2x2 junction

4x4/4x6 downspout insert (adapts to 2x2 system)

4x4 trumpet flare kit

4-inch square to 2-inch round adapter with

5-feet flex tubing

10-feet flex tubing

15-feet flex tubing

4x4 single flex tube attachment with (1) 5-foot

length 2-inch flex tubing

4x4 dual flex tube attachment with (2) 5-foot

lengths 2-inch flex tubing

Catalog Number

FGS-MJWR-AFGS-MEX1-C-5FFGS-HDSI-ABFGS-MTRM-AFGS-ASRI-5FFGS-ASRI-10FFGS-ASRI-15FFGS-KT03-A1FGS-KT03-A

2x6, 4x4 and 4x6 Support Kits

Description

New threaded rod bracket (5/8-inch)

New threaded rod bracket (1/2 -inch)

Modified new threaded rod bracket (5/8-inch)

Existing threaded rod bracket (5/8-inch)

Existing threaded rod bracket (1/2 -inch)

Modified existing threaded rod bracket (5/8-inch)

Center support bracket (5/8-inch)

Center support bracket (1/2 -inch)

L bay support bracket

Digital cableway bracket kit (12-inch)

Digital cableway bracket kit (15-inch)

Top support C-bracket

Top support low profile C-bracket

Ladder rack center support bracket kit

Threaded rod, 5/8-11x12-inch

Threaded rod, 5/8-11x30-inch

Threaded rod, 5/ -11x72-inch

Catalog Number

FGS-HNTR-5/8FGS-HNTR-1/2FGS-HNTR-5/8-AFGS-HETR-5/8FGS-HETR-1/2FGS-HETR-5/8-AFGS-HTUB-5/8FGS-HTUB-1/2FGS-HLBKFGS-HCBL-12FGS-HCBL-15FGS-HNTS-5/8FGS-HNTS-5/8-LPFGS-HNLR-ABFGS-HTHR-5/8-12FGS-HTHR-5/8-30FGS-HTHR-5/8-72

FGS-MDSP-EX-A

FGS-HNTR-XX

Trang 15

6/04

4x6 Fittings and Junctions

4x6 45º horizontal elbow cover

4x6 45º down elbow

4x6 90º down elbow

Description

6-foot horizontal straight section hinged cover

6-foot horizontal straight section snap-on cover

Catalog Number

FGS-MSHS-BFGS-MSHC-BFGS-MVAR-BFGS-MSSC-B/G

FGS-MFAW-BFGS-MDSP-B

FGS-MSHS-BFGS-MU9E-B

Trang 16

4x12 trumpet flare kit

4x12 downspout with 4x6 exit

4x12 downspout with rear T

FGS-MH9E-F

FGS-MSHS-F

Description

6-foot snap-on cover

Catalog Number

FGS-MSHS-FFGS-MVAR-FFGS-MSSC-F

4x12 System Support Kits

Trang 17

6/04

Vertical Duct Systems

Description

2x2 vertical slotted duct kit, 6-feet

2x2 vertical 1.5-inch slotted duct kit, 6-feet

2x2 vertical solid duct

1x2 vertical duct kit

1x2 solid vertical duct kit

2x2 vertical to 1x2 vertical adapter bracket

2x2 vertical slotted duct, 6-feet

2x2 vertical 1.5-inch slotted duct, 6-feet

Cover for 2x2 vertical duct, 6-feet

2x2 vertical duct mounting bracket

4x4 vertical duct kit

4x4 vertical adapter junction kit

4x4 vertical slotted duct, 6-feet

Cover for 4x4 vertical duct, 6-feet

4x4 vertical duct mounting bracket

Catalog Number

FGS-KTW1-CFGS-KTW1-CAFGS-KTW4-CFGS-KTW1-EFGS-KTW4-EFGS-ACC063FGS-MSHS-CFGS-MSHS-CAFGS-MSHC-CFGS-HWMB-DFGS-KTW2-DFGS-MJWR-DFGS-MSHS-DFGS-MSHC-CFGS-HWMB-D

Accessories

Description

Flex Tubing

2-inch outer diameter slotted flex tube, 5-feet

7/8-inch outer diameter slotted flex tube, 5-feet

Accessories

Hinge kit for 4x4 and 4x6 covers (kit of 1)

Self-closing hinge (kit of 3)

Retainer rings (kit of 10)

Trough cover clip kit

Mitre box and saw

FGS-KTW2-D

FGS-MIDY

Tiêu đề	Raceway Systems FiberGuide® Fiber Cable Management Standard Plenum
Tác giả	MSO Market Solutions
Thể loại	datasheet
Năm xuất bản	2004

Định dạng
Số trang	24
Dung lượng	411,76 KB