Tài liệu Optical Signal Management Modules docx

Features and BenefitsVAM chassis and modules available for all ADC fiber frames One-stop shop for complete optical transport system requirements Monitor testing Enables providers to trou

Trang 1

w w w a d c c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1 175

Optical Signal Management Modules

WideVAM™System for Fiber Distribution Frames (FDF) 187

Mini/Micro VAM System for

Value-Added Module System for Optical

Trang 2

Features and Benefits

VAM chassis and modules available for all ADC fiber frames

One-stop shop for complete optical transport system requirements

Monitor testing

Enables providers to troubleshoot networks without forcing disruption of service

Enclosed plug-in modules

Optical components are protected from physical and environmental damage

Angled retainers

Maintains minimum bend radius of fiber patch cords

Horizontal mounted plug-in modules

Modules can be added or removed from the chassis without interfering with existing terminated

patch cords

Universal mounted plug-in modules

No need to order different part numbers for left side or right side mounted modules

Extensive product labeling

Customers have all the information required for installation and maintenance without referring

to the user manual or drawings

Flexible platform

Modules can be created for new applications quickly and easily to meet customer requirements

Module Labeling System

Schematics are marked on peel-off labels that can be attached to the chassis designation

labeling system

Custom Configurations

Custom splitter configurations available upon request, call ADC Technical Assistance Center

at 1-800-366-3891

Trang 3

Unloaded chassis for ADC Front Load frames

No rear cable management or doors attached

to module

Unloaded chassis for ADC Rear Load frame

Rear cable management and doors attached

8 Inch Chassis – 12 Single Plug-In Modules

The FDF VAM chassis was designed to fit into any open chassis location within an existing ADC fiber distribution frame (FDF) The FDF VAM chassis is available with or without rear cable management It can accommodate a maximum of either 12 plug-in modules, 12 bulkhead plates, 12 blank panels or any combination thereof The 8" Rear Load chassis mounts in EIA or WECO racks.

FDF-STDVAMFor ADC Front Load Frames ONLY

FDF-FCMVAMFor ADC Rear Load Frames ONLY

Value-Added Module System

ADC Fiber Distribution Frame - Standard Chassis

1This product is available in black; for this option, add “-BK” to the end of the catalog number.

Please contact the Technical Assistance Center at 1-800-366-3891 with any questions.

Trang 4

6/04

7-Inch Chassis – 12 Single Plug-In Modules

The 7" VAM chassis was designed to fit into any open chassis location

within an existing ADC 7" module system FDF or in an LGX-style

frame It can accommodate a maximum of 12 single plug-in modules,

12 bulkhead plates, 12 blank panels or any combination thereof.

Adjustable mounting brackets are provided for 19" or 23" rack

mounting environments The 7" chassis mounts in EIA or WECO racks.

FVM-19X700

Description

Unloaded chassis for ADC 7" style frames

23" VCG included

Unloaded chassis for LGX 7" style frames

with rear doors

23" VCG included

Unloaded chassis for ADC 7" style frames

19" VCG included

Unloaded chassis for LGX 7" style frames

with rear doors

FVM-19X719FVM-19X719X11

VCG-25VCG-45

Dimensions (HxWxD)

7.0" x 19.0" or 23" x 12"

(17.78 x 48.26 or 58.42 x 30.48 cm)7.0" x 19.0" or 23" x 11.03"

(17.78 x 48.26 or 58.42 x 28.02)7.0" x 19.0" or 23" x 12"

(17.78 x 48.26 or 58.42 x 30.48 cm)7.0" x 19.0" or 23" x 11.03"

(17.78 x 48.26 or 58.42 x 28.02)

O r d e r i n g I n f o r m a t i o n

ADC Fiber Distribution Frame - Standard Chassis

5.25-Inch Chassis – 8 Single Plug-In Modules

The 5.25" VAM chassis was designed to fit into any 23" rack

mounting environment It can accommodate a maximum of

8 plug-in modules, 8 bulkhead plates, 8 blank panels, or any

1This product is available in black; for this option, add “-BK” to the end of the catalog number

Trang 5

1This product is available in black; for this option, add “-BK” to the end of the catalog number

4 Inch Chassis – 6 Single Plug-In Modules

The 4" VAM chassis was designed to fit into any 23"

rack mounting environment It can accommodate a

maximum of 6 plug-in modules, 6 bulkhead plates,

6 blank panels or any combination thereof.

Not for use in FDF

3.5 Inch Chassis – 4 Single Plug-In Modules

The 3.5" VAM chassis was designed to fit into

any 19" rack mounting environment It can

accommodate a maximum of 4 plug-in modules, 4

bulkhead plates, 4 blank panels or any combination

thereof Adjustable mounting brackets are provided

for 23" mounting environments.

Not for use in FDF

1.75 Inch Chassis – 2 Single Plug-In Modules

The 1.75" VAM chassis was designed to fit into any

19" rack mounting environment It can accommodate

a maximum of 2 plug-in modules, 2 bulkhead plates,

2 blank panels or any combination thereof Adjustable

mounting brackets are provided for 23" mounting

Universal Chassis used in Non-ADC Optical Distribution Frame

Trang 6

6/04

1This product is available in black; for this option, add “-BK” to the end of the catalog number.

FL2000 VAM System Chassis

• Chassis to house ADC VAM plug-in modules in FL2000 installations

• 19" rack mount

• Vertical cable guides included

19.0"

(48.26 cm) 5.0"

(15.24 x 48.26 x 25.76cm)10.5" x 19" x 10.14"

(26.6 cm)

5.0"

(12.7 cm)

FL2 VAM 4-Position Chassis

Note: The FL2000 VAM system is designed to accept only front access modules; i.e., all input and output adapters,pigtails and/or bare fibers must be located on the front of the plug-in modules

For complete information on ADC’s FL2000 product family, please call 1-800-366-3891, and ask for catalog 803, orvisit our website at www.adc.com

ADC Fiber Distribution Frame

Trang 7

Module Option

Input front, output front Input front, output rear Input rear, output rear Input rear, output front

50/50 55/45 60/40 65/35 66.6/33.3 70/30 75/25 80/20 85/15 90/10 95/5 99/1 50/50 33/33/33 25/25/25/25 20/20/20/20/20 16.6/16.6/16.6/

16.6/16.6/16.6 14.3/14.3/14.3/

14.3/14.3/14.3/14/3 12.5/12.5/ 12.5 11.1/11.1/11.1/ 11.1 10/10/10/ 10 9.1/9.1/9.1/ 9.1 8.33/8.33/8.33/ 8.83 7.7/7.7/7.7/ 7.7 7.14/7.14/7.14/ 7.14 6.66/6.66/6.66/ 6.66 6.25/6.25/6.25/ 6.25 3.125/3.125/3.125/ 3.125

See pages 206-208

for specifications

Other Split Ratios are available Call ADC Technical Assistance Center at 1-800-366-3891.

2000 2100 2200 2300 2350 2400 2500 2600 2700 2800 2900 2950 2030 3900 4900 5300 6000 7000 8000 9000 A110 B111 C112 D113 E114 F115 G116 M132

Number of Splitters

Single Splitter Dual Splitter (2) Triple Splitter (3)

A B C

Output Connector/Adapter

2U 2A 7U 7A LA 00

FC ultra polish

FC angled polish

SC ultra polish

SC angled polish LX.5 angled polish Bare fiber

Input Pigtail Length

Example (In Meters):

01 = 1 m

10 = 10 m

00 = Adapters only on

input and output ports

Output Pigtail Length

IN OUT

REAR FRONT

Connectorized pigtail to OSP port on the fiber frame

Adapter to attach patch cord or pigtail

to OSP port

Adapter to attach

patch cord to equipment

SPLITTER COMPONENTS

Splitter Module for FDF, FL2000 and non-ADC Optical Distribution Frames

Splitter Module

REAR

3

IN OUT

FRONT

Input Front, Output Rear

1 x N OUTPUT

INPUT

2

IN OUT

FRONT REAR

OUTPUT

INPUT OUTPUT

Input Front, Output Front

1 x N

4 Input Rear,Output Rear

IN OUT REAR

Trang 8

Mux Port Connector/Adapter

2U2A7U7ALA00

FC ultra polish

FC angled polish

SCultra polish

SCangled polishLX.5® angled polishBare fiber

Demux Port Pigtail Lengt Configuration

Demux Port Connector/Adapter

2U2A7U7ALA00

FC ultra polish

FC angled polish

SCultra polish

SCangled polishLX.5® angled polishBare fiber

Unidirectional multiplexerUnidirectional demultiplexerBidirectional λ1 Tx/λ2 RxBidirectional λ1 Rx/λ2 Tx

45 dB isolation,pass 1310

45 dB isolation,pass 1550(Dual only) unidirectional multiplexer, unidirectional demultiplexer*

(Dual only) bidirectional

λ1 Tx/λ2 Rx, bidirectional

λ2 Tx/λ1 Rx

ACEGJKL

Mux Port Pigtail Length

01 = 1 m

10 = 10 m

00 = Adapters only on mux

and demux ports

See pages 206-208 for specific

* WDM Type "L" includes (1) unidirectional multiplexe (standard isolation) and (1) unidirectional demultiple (isolation specified by next character)

Wavelength

1310 (λ1)/1550 (λ2)A

2345

MUX front, DEMUX frontMUX front, DEMUX rearMUX rear, DEMUX rearMUX rear, DEMUX front

Standard VAMWDM

WDM-REAR FRONT

Connectorized pigtail Adapter port

Adapter port

WDM

Connectorized pigtail (3 mm jacketed) Bare pigtail (2 mm jacketed)

WDM Module

WDM Module for FDF, FL2000 and non-ADC Optical Distribution Frames

Wavelength division multiplexers are mounted within modules in single or dual configurations.

The connectors can be mounted on the front and rear, or on the front only

In the ordering charts, the abbreviation “mux” references the multiplexed

side of the WDM, the side where two optical signals co-exist on one fiber

The abbreviation “demux” references the demultiplexed side of the WDM,

the side where each signal appears on its own fiber Both unidirectional

and bidirectional WDMs are available as shown below

1310

1310 1550 1550

1310

1310 1550 1550

Trang 9

WDM Module for FDF, FL2000 and non-ADC Optical Distribution Frames

4 Mux Rear,Demux Rear

REAR

Mux Rear,Demux Front

3

Mux Front,Demux Rear

WDM

Demux Demux

Mux

Demux Demux Mux

Mux Front,Demux Front

WDM

WDM Module

Trang 10

6/04

Monitor Module for FDF, FL2000 and non-ADC Optical Distribution Frames

Catalog Number

ABCEFHJK

90/1095/0550/5080/2075/2570/3060/4099/01

Module Style

Dual Monitor Cross-Connectwith attenuator

Customer PremisesCustomer Premises MonitorDual Monitor Cross-ConnectSingle Monitor Cross-Connectwith attenuation

Dual Monitor Cross-ConnectDual Monitor Cross-ConnectCustomer Premises

Single Monitor Cross-Connect

1BCDFGJPR

VMM

-Monitor Connector Type Singlemode

2U2A7U7ALA

FC ultra polish

FC angled polish

SC ultra polish

SC angled polishLX.5® angled polish

123

1 circuit

2 circuits

3 circuits

Number of Circuits per VAM

See pages 206-208 for specifications

Monitor Module

Other connector types are available Please contact ADC.

Trang 11

Tx Rx

Tx MON

Rx MON

Tx Rx

SPLITTER 90%

10%

SPLITTER 90%

10%

Dual MonitorCross-Connect

1 x 2

Tx

Insertion/DetectionCross-Connect

1 x 2

VAR ATTN

Customer PremisesMonitor Module

B

SRC Rx

CUST MON SRC MON

CUST Rx

SRC Tx CUST Tx

1 x 2 SPLITTER A

1 x 2 SPLITTER B

SRC MON

SRC Rx

CUST Rx CUST Tx

SRC Tx

1 x 2 SPLITTER

P

1 x 2 SPLITTER

1 x 2

Rx

VAR ATTN

J

Tx

Mon Tx Mon Rx

R

Tx AI

Rx

Tx A

Tx MON A2

Rx

1 x 2 SPLITTER

XX.XX%

C

SOURCE MON CUSTOMER MON

CUSTOMER Rx

SOURCE Tx

Trang 12

6/04

Bulkhead Plates and Blanks

Terminators

Terminator plugs should be ordered for each unterminated leg on ultra polish adapter ports For

configurations with pigtails an adapter is also required.

* These products are available in black; for this option, simply add “-BK” to the end of the catalog number.

Please contact the Technical Assistance Center at 1-800-366-3891 with any questions

Trang 13

Description

Unloaded chassis for ADC

front load frames; accommodates

Unloaded chassis for ADC

rear load frames; accommodates

ADC’s WideVAM family of products allows for an even more

efficient integration of optical components into the FDF.

WideVAM chassis are available for both the 8" FDF product

family and universal 19"/23" rack mount environments The

WideVAM chassis continue to provide the utmost protection,

modularity and flexibility for all optical component needs.

The WideVAM incorporates 18 front and 10 rear ports to

provide 50 percent more density than the standard FDF VAM.

7-inch and 8-inch WideVAM chassis are available, ensuring

consistent, superior cable management within the frame.

1 This product is available in black; add “-BK” to the end of the catalog number

Trang 14

6/04

1 This product is available in black; add “-BK” to the end of the catalog number

Trang 15

4 Input Rear,Output Rear

IN OUT

3

IN OUT

Input Front, Output Rear

1 x N OUTPUT

INPUT INPUT

Input Front, Output Front

IN OUT

Input Rear, Output Front

01 = 1 m

10 = 10 m

00 = Adapters only on

input and output ports

Module Option

2 Input front, output front

3 Input front, output rear

4 Input rear, output rear

5 Input rear, output front

Trang 16

In the ordering charts, the abbreviation “mux” references the multiplexed

side of the WDM, the side where two optical signals coexist on one fiber

The abbreviation “demux” references the demultiplexed side of the WDM,

the side where each signal appears on its own fiber Both unidirectional

and bidirectional WDMs are available as shown below

1310

1310 1550 1550

1310

1310 1550 1550

Mux Port Pigtail Length

Configuration

2 MUX front, DEMUX front

3 MUX front, DEMUX rear

4 MUX rear, DEMUX rear

5 MUX rear, DEMUX front

Module Configuration

M (Dual only) bidirectional

l1 Tx/l2 Rx, bidirectional

l2 Tx/l1 Rx

Trang 17

Mux Front,Demux Rear

WDM Demux

Mux

Demux Mux

Mux Front,Demux Front

WDM

Trang 18

LA LX.5®angled polish

00 Bare fiber

Number of Circuits per VAM

D Dual monitor cross-connect

G Dual monitor cross-connect

J Dual monitor

P Customer premises

R Single monitor cross-connect

See pages 206-208 for specifications

Trang 19

Tx Rx

Tx MON

Rx MON

Tx Rx

SPLITTER 90%

10%

SPLITTER 90%

10%

Single MonitorCross-Connect

R

CUST Rx

SRC Tx CUST Tx

1 x 2 SPLITTER A

1 x 2 SPLITTER B

SRC Rx

CUST Rx CUST Tx

SRC Tx

1 x 2 SPLITTER

P

1 x 2 SPLITTER

Rx

Tx A

Tx MON A2

Rx

1 x 2 SPLITTER

Trang 20

6/04

ADC Next Generation Frames (NGF) Mini-Vam

The NGF VAM chassis is designed to mount on all standard NGF frame styles and is interchangeable with termination, splice, and storage modules Each chassis accommodates up to 12 mini-VAM modules.

NGF - TB D

Block Orientation

LR

LeftRight

Cable Exit Direction (Rear)

UD

UpwardDownwardNGF VAM Chassis

* NGF VAMs with LX.5®adapters can be placed in either of these block styles

Please contact ADC Technical Assistance Center at 1-800-366-3891 with any questions

* Chassis accept package style H.

Description

Unloaded chassis for ADC NGF;

accommodates 12 MicroVAMS

Order chassis for left or right side of NGF;

add L or R to end of catalog number

Tiêu đề	Optical Signal Management Modules
Trường học	ADC
Chuyên ngành	Optical Communications / Optical Signal Management
Thể loại	Standard Value-Added Module System
Năm xuất bản	2004

Định dạng
Số trang	34
Dung lượng	1,18 MB