Tài liệu FiberGuide® Fiber Management System 4x24-Inch System docx

In response to customer requests, ADC continues to innovate and improve the FiberGuide® fiber management system, adding greater capacity and flexibility to the network, and driving down

w w w a d c c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1

4x24-Inch System

The Industry’s Most Comprehensive Fiber Management System expands to 24-inches.

In response to customer requests, ADC continues to innovate and improve the FiberGuide®

fiber management system, adding greater capacity and flexibility to the network, and driving down installation time to ensure a smooth deployment Fiber densities continue to increase in today’s networks, creating demand for increased cable management capacity and protection ADC’s 4x24-inch FiberGuide is designed to meet this need ADC is the first and only manufacturer to deliver this unique solution

FiberGuide is a fiber management system used to protect and route fiber optic patch

cords, multifiber cable assemblies and intrafacility fiber cable (IFC) to and from fiber splice enclosures, fiber distribution frames and fiber optic terminal devices FiberGuide ensures a two-inch minimum bend radius is maintained throughout the system

The 4x24-inch system is the standard and ultimate raceway solution to securely route and protect patch cords over high-density optical distribution frames including ADC’s Next Generation Frame (NGF) and Next Generation 3 Frame (NG3®) Designed for maximum capacity, this robust system provides the same support and flexibility as the traditional 4x12-inch system while doubling capacity The 4x24-inch FiberGuide system is a complete set of products designed and manufactured to ensure total off-frame protection and ease of use Basic components include horizontal straight sections, horizontal and vertical elbows, downspouts, junctions, Express Exits™ and numerous support hardware fittings and flex tube kits Tool-less SnapFit™ junctions significantly reduce installation time

Speed of Installation

The 4x24-inch FiberGuide® system features a

variety of products that make installation simple

and efficient Express Exit drops and tool-less

products like the Snap-Fit junction save valuable

time for installers ADC’s support bracket kits

utilize the quick knob, allowing support bracket

kits to be attached with ease Additionally,

multiple support bracket mounting locations aide

in speedy installations

Speed of Deployment

The 4x24-inch system is compatible with the 2-inch

and 4-inch Express Exit systems This enables new

drops to be added or removed quickly and easily

A drop may be added into a fully loaded raceway

in seconds — without cutting

Raceway Flexibility

The 4x24-inch system is an extension of ADC’s

broad product offering The system now includes

2x2-inch, 2x6-inch, 4x4-inch, 4x6-inch, 4x12-inch

and 4x24-inch raceways, to suit any network

application Variable support bracket kits provide

the flexibility needed to accommodate various

mounting requirements

Fiber Protection

ADC’s broadband expertise translates into

maximum protection for your network Two-inch

minimum bend radius is maintained throughout

the system regardless of the raceway size

Strength and Durability

100% raceway reliability — stands up to any

challenge

Features and Benefits

Existing 5/8" Threaded Rod Trapeze Kit

4x24 Horizontal Cross with Dual 12" Exits

12" Cut in T for 4x24-inch system

3

4x24 Island T

The 4x24 Island T with 12-inch exit is designed to be used over the NGF, NG3® or any high-density fiber frame The 4x24 Island T, a horizontal T with spool and factory-installed trumpet flare, channels fiber directly into the vertical cableways below

4x24-Inch System Application

4x24 Island T (shown with support brackets over an NGF frame)

4x24 Snap-Fit Junction

FGS-MFAW-H

4x24 Six-foot Straight Section

FGS-MSHS-H

45° Horizontal Elbow

FGS-MH4E-H

4x24 Horizontal T with Single

12" Exit

FGS-MHRT-H/F

4x24 Horizontal Cross

FGS-MHXP-H 4x24 Horizontal Cross with

Dual 12" Exits

FGS-MHXP-F/H

4x24 Trumpet Flare

FGS-MD4E-H

45° Up Elbow

FGS-MU4E-H

12" Cut in T

FGS-MHIS-B/H

Variable Fitting Support Locater Horiz T with Single 12" Exit*

FGS-MHRT-H/F-VS

Variable Fitting Support Locater Horiz Elbow*

FGS-MH4E-H-VS

4x24 End Cap

FGS-HMEC-H

4x24 Island T with Single 12" Exit

FGS-ISLAND-H/F

4x24 to 4x12 Adapter

FGS-MDSA-HF

4x24-Inch System Components

5

Recommended capacity takes into consideration random jumper placement into the FiberGuide®

System Maximum density refers to the maximum number of jumpers in a given cross-section of a FiberGuide installation The TracerLight® Connector Identification System is ADC's newest patch cord solution It features slightly different dimensions than standard patch cords

Recommended

Patch Cord

Density

1.7 mm Patch Cords

2.0 mm Patch Cords

3.0 mm Patch Cords

Trough Pileup

4x24-Inch FiberGuide System 1.7 mm Patch Cords

4x24-Inch FiberGuide System 2.0 mm Patch Cords

4x24-Inch FiberGuide System 3.0 mm Patch Cords

Trough

ADC Recommended Patch Cord Density (per square inch)

Maximum Patch Cord Capacity using 4x24-Inch FiberGuide System

Trough Pileup

4x24-Inch FiberGuide System 1.7 mm Patch Cords

4x24-Inch FiberGuide System 2.0 mm Patch Cords

4x24-Inch FiberGuide System 3.0 mm Patch Cords

TracerLight Patch Cord Capacity using 4x24-Inch FiberGuide System

(65 patch cords per square inch)

Recommended Patch Cord Capacities

ADC Recommended Patch Cord Capacity using 4x24-Inch FiberGuide System

114.3 mm (4.5")

645 mm (25.4")

4x24 End Cap

FGS-HMEC-H

4.1 mm (.16")

419 mm (16.5")

795 mm (31.3")

470 mm (18.5")

160 mm (6.3") (8")

203.2 mm

4x24 Island T with Single 12" Exit

FGS-ISLAND-H/F

4x24 x 4x12 Adapter

FGS-MDSA-HF

108 mm (4.25") 697.2 mm

(27.45")

127.3 mm (5.01")

143.5 mm (5.65") (24")

609.6 mm

4x24 Snap-Fit Junction

FGS-MFAW-H

581.2 mm (22.88")

652 mm

701 mm (27.6")

4x24 45° Horizontal Elbow

FGS-MH4E-H

(4.72") 119.9 mm

(24") 609.6 mm

533.1 mm (20.99")

652 mm

347.2 mm (13.67")

745 mm

(24") 609.6 mm

(12") 304.8 mm 119.9 mm(4.72")

4x24 Horizontal T with Single 12" Exit

MGS-MHRT-H/F

533.1 mm (20.99")

347.2 mm (13.67")

837.9 mm (32.99")

652 mm (12")

304.8 mm 119.9 mm(4.72")

(24") 609.6 mm

4x24 Horizontal Cross with Dual 12" Exits

FGS-MHXP-F/H

(4.72") 119.9 mm (24")

609.6 mm

837.9 mm (32.99")

652.3 mm (25.68")

837.9 mm (32.99")

4x24 Horizontal Cross

FGS-MHXP-H

584.2 mm (23")

576.6 mm (22.7")

101.6 mm

(4")

88.9 mm

4 x 24 Straight Section

FGS-MSHS-H 4x24-Inch System Component Specifications



12.7 mm

(.5")

736.6 mm (29") 844.6 mm

(33.25")

50.8 mm (2")

Split Nut Bracket Clip

Existing Threaded Rod Trapeze Bracket

Threaded Rod Ref

Quick Knob

Existing 5/8” Threaded Rod Trapeze Bracket Kit

FGS- HETP-H-5/8

793.8 mm (31.25")

736.6 mm (29")

50.8 mm (2")

New 5/8” Threaded Rod Trapeze Bracket Kit

FGS-HNTP-H-5/8

(24") 609.6 mm

4x24 45° Down Elbow

FGS-MD4E-H

177.8 mm (7")

116.6 mm (4.59")

SIDE

Variable Support Bracket - Horiz Elbow

FGS-MH4E-H-VS

304.8 mm (12")

345.2 mm (13.59")

329.9 mm (12.99")

128 mm (5.03")

101.6 mm (4")

4x4 Cut-in T for 4x24 FiberGuide

FGS-MHIS-A/H

4" Cut-in T Adapter Bracket

152.4 mm (6")

355.6 mm (14")

381 mm (15")

396 mm

128 mm (5.03")

4x6 Cut-in T for 4x24 FiberGuide

FGS-MHIS-B/H

6" Cut-in T Adapter Bracket

508 mm (20")

304.8 mm (12")

533.4 mm (21")

548.4 mm (21.59")

128 mm (5.03")

4x12 Cut-in T for 4x24 FiberGuide

FGS-MHIS-F/H

12" Cut-in T Adapter Bracket

Variable Support Bracket - Horiz T

FGS-MHRT-H/F-VS

Variable Support Bracket - Horiz Cross

FGS-MHXP-F/H-VS

Variable Support Bracket - Horiz Cross

FGS-MHXP-H-VS

4x24-Inch System Component Specifications

Variable Fitting Support Locator

- Horiz Elbow

FGS-MH4E-H-VS

Variable Fitting Support Locator

- Horiz T

FGS-MHRT-H/F-VS

Variable Fitting Support Locator

- Horiz Cross

FGS-MHXP-H-VS

Variable Fitting Support Locator

- Horiz Cross

FGS-MHXP-F/H-VS

Web Site: www.adc.com

4 x 24-Inch System Section and Junction Yellow System Catalog Number Orange System Catalog Number

4x24 Six-foot Straight Section FGS-MSHS-H FGSO-MSHS-H

O r d e r i n g I n f o r m a t i o n

Yellow and Orange System

4x24-Inch System Support Kits for both Yellow and Orange Systems Catalog Number

Variable Fitting Support Locater Kit for 4x24 Horizontal Elbow* FGS-MH4E-H-VS Variable Fitting Support Locater Kit for 4x24 Horizontal T with Single 12" Exit* FGS-MHRT-H/F-VS Variable Fitting Support Locater Kit for 4x24 Horizontal Cross* FGS-MHXP-H-VS Variable Fitting Support Locater Kit for 4x24 Horizontal Cross with Dual 12"

Existing 5/8" Threaded Rod Trapeze Bracket Kit FGS-HETP-H-5/8 New 5/8" Threaded Rod Trapeze Bracket Kit FGS-HNTP-H-5/8

O r d e r i n g I n f o r m a t i o n

4x24-Inch System Fittings Yellow System Catalog Number Orange System Catalog Number

4x24 Horizontal T with Single 12" Exit FGS-MHRT-H/F FGSO-MHRT-H/F

4x24 Horizontal Cross with Dual 12" Exits FGS-MHXP-F/H FGSO-MHXP-F/H

4x24 Island T with Single 12" Exit FGS-ISLAND-H/F FGSO-ISLAND-H/F

12" Cut-in T for 4x24 FGS-MHIS-F/H FGSO-MHIS-F/H

O r d e r i n g I n f o r m a t i o n

* kits do not include trapeze or cantilever support brackets.