Extending DS-3 services over longer distances to select floors in a building or to buildings in a campus is required.. Solution The Soneplex® DS-3 Loop Extender D3LX module enables effic
Trang 1For many buildings and campus environments, voice, data and Internet communications are supported with DS-1 services Yet as demands for bandwidth continue to increase, DS-1 is proving insufficient for some applications Today, DS-3 is more than just "nice to have" It has become a necessity Extending DS-3 services over longer distances to select floors in a building or to buildings
in a campus is required
In this case, the customer could be an Interoffice Carrier (IOC) or a Competitive Local Exchange Carrier (CLEC), buying DS-3 from the Incumbent Local Exchange Carrier (ILEC) to provide a local area network within a building or campus Or the customer could be a building owner, managing the varied bandwidth requirements of multiple tenants within a building or of multiple buildings across
a campus
For each of these customers, DS-1 may be fully deployed, yet distance limitations restrict deployment
of DS-3 service over copper pairs For each customer, the issue remains the same—how to selectively deploy highly reliable DS-3 services across a campus or up the risers in a building in a cost-effective manner
Solution
The Soneplex® DS-3 Loop Extender (D3LX) module enables efficient, cost-effective distribution of DS-3 services throughout a building or campus Mounted in the Soneplex Loop Extender Chassis, D3LX extends distance by transmitting DS-3 signals over a single fiber cable With a 13dB optical budget, D3LX can extend DS-3 service up to about 16 miles—more than enough distance for tall buildings and sprawling campus settings
D3LX converts electrical DS3 signals into optical DS3 signals, which are transmitted on a single fiber using wave division multiplexing (WDM) technology Optical DS-3 signals are then converted back into electrical DS-3 signals at Soneplex Remote Terminals Using WDM, transmit and receive signals are carried on different wavelengths on the same single mode fiber cable—leveraging the existing fiber plant and reducing implementation costs
Benefits – D3LX
• Leverage existing fiber plant By using WDM, DS-3 transmit and receive signals
require one single mode fiber, not two
• Lower costs Addresses bandwidth demands without the costs of laying new fibers
D3LX is less costly than wireless or SONET-based DS-3 solutions
• Add flexibility Allows selective DS-3 capacity expansion to any floor or building.
• Extend distance Enables a longer reach for DS-3 services with use of fiber cables.
Extending Distance in DS-3 Deployment
Trang 2ADC Telecommunications, Inc., P.O Box 1101, Minneapolis, Minnesota USA 55440-1101
Specifications published here are current as of the date of publication of this document Because we are continuously improving our products, ADC reserves the right to change specifications without prior notice At any time, you may verify product specifications by contacting our headquarters office in Minneapolis ADC Telecommunications, Inc views its patent portfolio as an important corporate asset and vigorously enforces its patents Products or features contained herein may be covered by one or more U.S or foreign patents.
1234648 6/02 Original © 2002 ADC Telecommunications, Inc All Rights Reserved An Equal Opportunity Employer
Web Site: www.adc.com
From North America, Call Toll Free: 1-800-366-3891 • Outside of North America: +1-952-938-8080 Fax: +1-952-946-3292 For a complete listing of ADC's global sales office locations, please refer to our web site.
Implementation
Chassis
The high-density Soneplex Loop Extender Chassis houses D3LX modules as well as low speed modules supporting HDSL, HDSL2, HDSL4, T1 repeaters and optical DS2 that can be mixed to accommodate unique requirements Supporting both fiber and copper simulataneously, the Soneplex Loop Extender Chassis provides maximum flexibility Advanced diagnostic and management functions allow maximum control and visibility throughout local networks
DS-3 Service Module
Soneplex DS-3 Loop Extender (D3LX) Module converts electrical DS-3 signals to optical DS-3 signals for optical transport over single mode fiber cable using 1310/1550nm WDM D3LX supports both remote and central office modules with central office and remote alarm capability as well as optional 1+1 switching capability Up to 7 protected or 14 unprotected DS-3 circuits can be provided from a Soneplex Loop Extender Chassis
Remote Terminals
Optical to electrical conversion is accomplished with Soneplex Remote Terminals The two position terminal supports up to two D3LX modules occupying a single rack unit The four position terminal supports four D3LX modules—two working and two protected—with a choice of indoor wall or rack mounting The four position chassis contains optional redundant rectifiers for AC powering, optional battery back-up and an optional DS-3 patch panel for easy monitoring, management and maintenance Each terminal provides remote performance monitoring and craft access for easy and lower cost maintenance
D3LX enables DS-3 service to support the high speed, high volume requirements of multiple tenants within a building With distance capabilities of approximately 16 miles, D3LX—which is temperature hardened for outside plant applications—is well suited for DS-3 distribution in campus environments, too.
Building
Basement
1 Fiber DS3
1, 2 pair Copper
DS3
Soneplex
BB Chassis
Soneplex Loop Extender Chassis
DS1
WQLX- 1 fiber QLX- 2 fibers
2 or 4 position chassis
A/D MUX
D3LX RT
DS2
2 or 4 position chassis
D3LX HDSL2 (W)QLX
(W)QLX
C O X