Tài liệu Route Optimization Challenge Lab doc

As the network engineer, you are told that all locations need to communicate by the end of the month.. Design Considerations You are to work with the existing routers in London and Cape

1 - 2 Semester 5: Advanced Routing v2.0 - Lab 7.6.1 Copyright  2001, Cisco Systems, Inc.

7.6.1 Route Optimization Challenge Lab

192.168.200.99/24 192.168.216.88/24

Fa0/0 192.168.200.1/24

Fa0/0 192.168.216.1/24

S0/0

192.168.192.2/30

S0/0 192.168.208.2/30

RIPv1

S0/1 192.168.208.1/30

S0/0 192.168.192.1/30

SanJose3

ISP2

Fa0/0 192.168.0.3/24 S0/0

172.16.0.5/30

Lo0 172.16.1.1/24

S0/1 172.16.0.6/30

Fa0/0 192.168.0.2/24

Fa0/0

192.168.0.1/24

192.168.0.0/24

OSPF Area 0

Lo0 192.168.64.1/24

Lo1 192.168.72.1/24

Lo2 192.168.80.1/24

Lo3 192.168.88.1/24

Lo0 192.168.96.1/24 Lo1 192.168.104.1/24 Lo2 192.168.112.1/24 Lo3 192.168.120.1/24

Objective

You create and optimize a network utilizing RIPv2 and OSPF Your network must connect to the Internet

Scenario

International Travel Agency is finally connecting its disparate networks As the network engineer, you are told that all locations need to communicate by the end of the month The only monies available for the project are for provisioning WAN links

Design Considerations

You are to work with the existing routers in London and Cape Town that support only RIPv2 For simplicity, you want to propagate a default route from SanJose2 to as many routers as possible You need to redistribute the connected loopbacks on SanJose1 and SanJose2, simulating sections of your internetwork Summarize, if appropriate

2 - 2 Semester 5: Advanced Routing v2.0 - Lab 7.6.1 Copyright  2001, Cisco Systems, Inc.

Implementation Requirements

• All RIPv2 networks will be redistributed into OSPF Summarize, if appropriate

• Use default routes between SanJose2 and ISP2

• SanJose3 will advertise a default route through the RIPv2 network

• Redistribute connected loopbacks on SanJose1 and SanJose2 Filter the ISP2 WAN link from being advertised by SanJose2

• SanJose1 will always be the DR in the core network

• Minimize the number of routes exchanged between core routers

Implementation Completion Tests

• Successful pings from all hosts to the Internet (ISP2 Lo0)

• SanJose1 is the DR