Tài liệu OptEnet™ Optical Extension Platform pdf

Features and Benefits: • Ethernet delivery solution from central office to customer premises • Modular design enables line card diversity within the same chassis • Extend central office

Trang 1

Optical Extension Platform

w w w a d c c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1

The ADC OptEnet™ Optical Extension Platform is a carrier-class, intelligent, scalable platform capable of handling any network’s Ethernet or SONET media transitions Bridging the gap between legacy copper infrastructures and fiber growth, the OptEnet platform provides the most economical evolution path Integrated intelligence allows the user to remotely monitor system performance and transmit alarm conditions to upstream operational support systems Leveraging ADC’s leadership in connectivity solutions, the OptEnet platform provides the ideal solution for Ethernet extensions in support of transparent LAN services or switch router interconnect

requirements A variety of solutions are supported ranging from 10Mb/s Ethernet, OC-12 and Gigabit Ethernet

Features and Benefits:

• Ethernet delivery solution from central office to customer premises

• Modular design enables line card diversity within the same chassis

• Extend central office interconnect between network elements when distances

are greater than 100 meters

• Reduce capital expenses associated with expensive optical line cards in network elements

• Supports multiple wavelength optical interfaces

• Auto-negotiation features eliminate the need for optical line card upgrade in network elements

• Redundant -48 VDC and +24 VDC power supplies

• Supports SNMP, TL1 and Telnet communication protocols

• Daisy-chain communication interfaces

• Supports 10Base-T, 100Base-TX and 1000Base-T UTP conversion to fiber

• Multimode fiber to singlemode fiber conversions

• Medium Dependent Interface Cross-over (MDI-X) eliminates network collisions

• NEBS Level 3, CE, UL and FCC standards compliant

Trang 2

6/06 • 101360AE

Applications

OE

Ethernet

Central Office

Ethernet

Central Office

Demarc

100E 100E

10E

OE

Ethernet

Central Office

OE - OptEnet Optical Extension 10E - 10 Mbps Ethernet 100E - 100 Mbps Ethernet 1000E - GIG Ethernet

OE Demarc

16TR

10E

OE

OE OE

1000E

Fiber Network

The OptEnet ™ platform can be utilized as the Ethernet delivery solution originating at a central office or remote site.

RJ45 Patch Panel

Network Element A

Ethernet Switch

RJ45 Patch Panel

Ethernet Distribution Frame

Network Element B

Router

OptEnet Optical Extension Fiber Panel

OptEnet Optical Extension

Electrical Ethernet distance limitation is 100 meters, yet the average central office cable distance can range from 8 km to 10 km The OptEnet platform can be deployed as an intra-office extension to link

Point-to-Point Transparent LAN or Virtual LAN Services

Ethernet Intrafacility Connectivity

Trang 3

Common Equipment

The OptEnet chassis is a modular chassis, which enables multiple types of line cards to be deployed simultaneously within the same chassis

Features:

• Supports up to 12 or 14 OptEnet line cards in

two rack units, with all front facing interfaces

• Supports up to 4 OptEnet line cards in one rack unit

• Accepts dual redundant power supplies

• 19 inches wide with 23-inch reverse mounting ears

• Optional SNMP, TL1 and/or alarm functionality

Specifications

PHYSICAL

14-Port Chassis

Dimensions (HxWxD): 8.89 cm x 43.43 cm x 25.65 cm (3.5“ x17.1“ x10.1“)

Weight (empty): 4.9 kg (10.7 lbs)

12-Port Chassis

Dimensions (HxWxD): 8.89 cm x 44.45 cm x 12.0 cm (3.5“ x 17.5“ x 5.75“)

4-Port Chassis

ENVIRONMENTAL CHARACTERISTICS

Operating Conditions: 5 ° to 40 ° C (-41 ° to 104 ° F) at 5% to 85% relative humidity

Short Term Conditions: -5 ° to 50 ° C (23 ° to 122 ° F) at 5% to 90% relative humidity

Storage Conditions: -40 ° to 70 ° C (-40 ° to 158 ° F) at 10% to 95% relative humidity

(no condensation)

Power Supply Modules

The OptEnet chassis accepts power from DC sources Dual power supplies are deployed within the chassis to provide redundant power to all line cards along the back plane

Features:

• -48 VDC (50 W and 100 W) power supply versions

• +24 VDC (100 W) power supply

• Extended temperature versions available

• Power connection on the front panel

• Power and temperature status LEDs

• Universal AC power supply

Specifications

ENVIRONMENTAL CHARACTERISTICS

DC Input Voltage: -48 VDC, +24 VDC

AC Input Voltage: 110 VAC to 240 VAC, 50-60 Hz

OptEnet DC Power Supply Module OptEnet 12-Port Modular Chassis

OptEnet 4-Port Modular Chassis

Trang 4

Common Equipment

Communications Modules

If remote monitoring is required, a central processor unit (CPU) can be deployed within the OptEnet™

platform An alarm card is available if only local alarm indications are required The CPU and alarm card are optional Only one of the two modules can be deployed in the chassis, so the network administrator must determine which alarm notification method is preferable

CPU Features:

• Serial and Ethernet interface

• SNMP, TL1 and Telnet communications protocols

• Compatible with all SNMP management platforms

• Daisy-chain up to four units, via one IP address

• Firmware upgrade via TFTP or serial

• Five simultaneous Telnet sessions

Alarm Card Features:

• Normally open and normally closed alarm contacts

Specifications

CONSTRUCTION CHARACTERISTICS

CPU

Ethernet Interface: 10Base-T, RJ45 connector

COM IN Interface: RS-232 DCE, RJ45 connector

COM OUT Interface: RS-232 DTE, RJ45 connector

Communications Protocol: SNMP, TL1 and ASCII

Alarm Module

Power ON Indicator: Green

Contact Closures: Normally open and normally closed

OptEnet CPU

OptEnet Alarm Module

Trang 5

Optical Conversion Line Cards

Singlemode to Singlemode Optical Regeneration Line Card

The OptEnet™singlemode to singlemode optical regeneration line card is one of a family of line cards that can be deployed in the OptEnet modular chassis The card is designed to regenerate optical signals transported over a singlemode link The card supports any protocol and data rate between 10 Mb/s to 2.488 Gb/s (OC-48)

Features:

• Single circuit line card

• Duplex transmission

• Link status and power LED indications

• SFP Optical Interfaces

• Protocol independent

• Supports data rates 10 Mb/s to 2.488 Gb/s

Specifications

ELECTRICAL

PHYSICAL

Chassis Compatibility: OptEnet modular chassis

Fiber Optic Connectors: LC (SFP module)

OPTICAL PERFORMANCE

OptEnet Singlemode to Singlemode Optical Converter Module

Singlemode –15 km Range Singlemode – 40 km Range

Output Optical Power

(XMT):

-5 dBm minimum

0 dBm maximum

-2 dBm minimum

3 dBm maximum

Input Optical

Power (RCV):

-18 dBm minimum

0 dBm maximum

-27 dBm minimum -9 dBm maximum

Trang 6

OptEnet ™ Gigabit Ethernet Line Card

The OptEnet 1000Mb/s media converter line card is designed to convert optical signals to electrical signals The card supports 1000BASE-T data rates over UTP and singlemode or multimode fiber

Supported Protocols

Specifications

ELECTRICAL

Input Power: 2.2 Watts maximum; normal operation

PHYSICAL

Fiber Optic Connectors: SC

Dimensions (HxWxD): 1.14" x 8.07" x 7.4" (2.89 x 20.5 x 18.8 cm)

Electrical Interface: RJ45

Optical Interface: SC

1000Base-T 1000Mb/s UTP Category 5e (4-pair) 328 feet (100 m) RJ45 1000Base-LX 1000Mb/s 1300 nm singlemode fiber 6.2 miles (10 km) (8/125µm) SC

OptEnet 1000Base-LX Line Card

Features:

• Supports Gigabit Ethernet

• Full duplex transmission (transmit and receive)

• Ethernet and fiber optic link indicators

• MDI-X – Auto-detects and corrects cross-over

(XMT):

-9.5 dBm minimum

4 dBm maximum

Input Optical

Power (RCV):

Trang 7

The OptEnet 10/100 Mb/s optical Ethernet conversion line cards are designed to convert optical signals

to electrical signals The line cards have an auto negotiation feature allowing them to detect and synchronize with either a 10Base-T or 100Base-TX signal The cards support 10Base-T and 100Base-T data rates over UTP and singlemode or multimode fiber

Supported Protocols:

Features:

• Supports 10Base-T, and 100Base-TX

• Full and half duplex transmission (transmit and receive)

• Auto negotiation over fiber and copper

(ANSI/TIA 785)

Specifications

ELECTRICAL

PHYSICAL

Fiber Optic Connectors: SC

Electrical Interface: RJ45

Optical Interface: SC

OptEnet 100Base-LX Ethernet Line Card

10Base-T 10 Mb/s UTP Category 3, 4 or 5 (2-pair) 100 m (328 feet) RJ45

100Base-TX 100 Mb/s UTP Category 5 (2-pair) 100 m (328 feet) RJ45

100Base-LX 10/100 Mb/s 1300 nm singlemode fiber 15 km (9.3 miles) SC

100Base-LX 10/100 Mb/s 1800 nm singlemode fiber 40 km (24.8 miles) SC

100Base-SX 10/100 Mb/s 850 nm multimode fiber 300 m (984 feet) SC

100Base-FX 10/100 Mb/s 1310 nm multimode fiber 2 km (2562 feet) SC

100Base-LX (Singlemode) 15 km

100Base-LX (Singlemode) 40 km

100Base-SX (Multimode)

100Base-FX (Multimode)

(XMT) 8/125µm:

Input Optical

Power (RCV):

-32 dBm minimum -11 dBm maximun

Trang 8

The OptEnet 10/100 Mb/s and Gigabit 1000 Mb/s media converter line card can be configured to support various wavelengths on the optical interface The line card supports small-form-plugable (SFP) transceivers in wavelengths from 1470 nm to 1610 nm This enables the module to interface with a passive CWDM multiplexer and reduce the number of optical links between sites

Features:

• Supports 10Base-T, 100Base-TX and 1000Base-T

• Full and half duplex transmission (transmit and receive)

• SFP optical interface

• Available in 1470 to 1610 nm wavelengths in 20 nm increments

Specifications

ELECTRICAL

PHYSICAL

Fiber Optic Connectors: SFP

Electrical Interface: RJ45 (UTP Category 5e)

Optical Interface: LC

OptEnet 1000Base-LX Line Card

(XMT):

-2 dBm minimum

3 dBm maximum

-2 dBm minimum

3 dBm maximum

Input Optical

Power (RCV):

Trang 9

6/06 • 101360AE

O r d e r i n g I n f o r m a t i o n

OptEnet ™ Common Equipment

Modular Chassis

Power Supply Modules

For redundant power applications, the OptEnet system requires two power supply modules

14-Port Chassis Power Supplies

OptEnet-48 VDC Power Supply Module (100 W)-standard temperature ADCCE2440A

OptEnet-48 VDC Power Supply Module (100 W) – Extended Temperature ADCCE2400A OptEnet-48 VDC Power Supply Module (100 W) – Standard Temperature ADCCE2410A

OptEnet-48 VDC Power Supply Module (50 W) – Extended Temperature ADCCE2450A

Communications Modules

The communications modules are optional to the system Only one communications module can be

deployed in the system; either the CPU or alarm module

OptEnet Line Cards Optical Conversion Line Card

OptEnet Singlemode to Multimode, 10-622 Mb/s optical converter, SC connector, 1310 nm

Optical Regeneration Line Card

OptEnet Singlemode to Singlemode Regenerator, 10 Mb/s to 2.488 Gb/s

OptEnet 10/100 Mb/s Optical Ethernet Conversion Line Card

OptEnet 1000 Mb/s Ethernet Conversion Line Cards

OptEnet Ethernet Conversion Line Cards for CWDM Applications

*Note: xxxx must be replaced with required wavelength:

Trang 10

ADC Telecommunications, Inc., P.O Box 1101, Minneapolis, Minnesota USA 55440-1101 Specifications published here are current as of the date of publication of this document Because we are continuously improving our products, ADC reserves the right to change specifications without prior notice At any time, you

Web Site: www.adc.com

From North America, Call Toll Free: 1-800-366-3891 • Outside of North America: +1-952-938-8080 Fax: +1-952-917-3237 • For a listing of ADC’s global sales office locations, please refer to our web site.

Tiêu đề	OptEnet Optical Extension Platform
Thể loại	Spec sheet

Định dạng
Số trang	10
Dung lượng	1,99 MB