TIGER DRYLACQuality Control Test instruction 1.. Purpose / Target: The gloss measurement serves for the determination reflecting power of a surface.. Description of the procedure: 2.1
Trang 1TIGER DRYLAC
Quality Control
Test instruction
1 Purpose / Target:
The gloss measurement serves for the determination reflecting power of a surface
2 Description of the procedure:
2.1) Testing sets
Reflectometer
2.2) Execution
The test board must be cleaned with visible pollution before the measurement with a soft cloth The Reflektometer is adjusted before the measurement to a radius of 60° For measurement the test board is set on the measuring opening
2.3) Analysis
The gloss degrees is read off from the display Additionally to it the test board with a datum locator (e.g Vorproduktion ) is checked for possible rough visual deviations
Approved by:
Ing M Mathe
Issue date March 98
Update status
02
Folder - Nr
HQ 03 - 18
page 1/1