Purpose / Target: The bending test serves the elasticity and the adhesive strength of coatings for the evaluation during bending load.. Description of the procedure: 2.1 Testing sets Ben
Trang 1
Test instruction
TIGER DRYLAC
DIN 53152
1 Purpose / Target:
The bending test serves the elasticity and the adhesive strength of coatings for the evaluation during bending load
2 Description of the procedure:
2.1) Testing sets
Bending thorns with different diameter with mounting plate
2.2) Execution
The coated sample sheet metals must be stored before the check at least 3 h The sample sheet metal is bent by hand within 1-2 s around the bending thorn with the required radius of 180° When bending the sheet metal must rest against the thorn!
2.3) Analysis
The bending points is examined with the eye on breaks and flakings
3 Link documents:
DIN 53152