c o mIndoor/Outdoor Cables Tight-Buffered, Low-Smoke, Zero-Halogen Jacketed UL Listed OFNR/OFCR Product Features ■ Available in single-mode as well as 50 and 62.5 µm multimode versions
Trang 1KRONE Fiber Optics P h o n e : 8 0 2 4 4 2 5 4 1 1 W e b : w w w k r o n e a m e r i c a s c o m
Indoor/Outdoor Cables
Tight-Buffered, Low-Smoke,
Zero-Halogen Jacketed
(UL) Listed OFNR/OFCR
Product Features
■ Available in single-mode as well as 50 and 62.5 µm multimode versions
■ Excellent crush, cut and abrasion resistance
■ Available with 4–24 fibers
■ Excellent flame retardancy (UL Listed OFNR/OFCR)
■ UV stable jacket
■ Flexible design/easy to install
■ Color-coded buffered fibers
■ All cables tested to EIA/TIA FOTP standards
Benefits
■ Saves time, labor; ideal for direct connectorization
■ Pull and terminate; no need to splice
at building entrance.
■ Ideal for installation in conduits between buildings (non-armored)
■ Offers a convenient alternative
to PVC riser cables
■ Armored version available for rodent resistance
Mechanical & Environmental Characteristics
Crush Resistance (EIA-FOTP-41A): 1500 N/cm 1500 N/cm
Impact Resistance (EIA-FOTP-25A): 1000 impacts 1000 impacts
Flexing (EIA-FOTP-104A): 1000 cycles 1000 cycles
Maximum Pulling Load (EIA-FOTP-33A): 1000 Newtons 1800 Newtons
Maximum Safe Operating Load: 600 Newtons 1000 Newtons
Minimum Bend Radius:
Operating Temperature: -40°C to +70°C -40°C to +70°C
Storage Temperature (non-flexing): -40°C to +70°C -40°C to +70°C
Installation Temperature: 0°C to +70°C 0°C to +70°C
TECHNICALDATA
50/125 Multimode 3.5/1.5▲ 2.6/0.6▲ 400/400▲ 50 ± 3 125 ± 2 0.200 ± 0.015 62.5/125 FDDI Multimode 3.5/1.5▲ 2.7/0.75▲ 160/500▲ 62.5 ± 3 125 ± 2 0.275 ± 0.015 62.5/125 Gigabit Multimode 3.5/1.5▲ 2.7/0.75▲ 200/500▲ 62.5 ± 3 125 ± 2 0.275 ± 0.015 100/140 Multimode 6.0/3.0▲ 4.5/2.0▲ 100/100▲ 100 + 3 140 + 4 0.290 ± 0.020 Single-mode 1.0/1.0■ 0.35/0.35■ Mode Field 9.3 ± 0.5 125 ± 2.0 0.13
Optical Specifications
Max Typical Guaranteed Core Clad Attenuation Attenuation Minimum Diameter Diameter Numerical
▲ Attenuation and Bandwidth values for Multimode: 850nm/1300nm
■ Attenuation and Bandwidth values for Single-mode: 1310nm/1550nm
C A B L I N G S Y S T E M S
Trang 2KRONE Fiber Optics P h o n e : 8 0 2 4 4 2 5 4 1 1 W e b : w w w k r o n e a m e r i c a s c o m
Cable and Jacket Specifications and Ordering Information
704LSZHIOCBX Distribution 4 OFNR (Riser) 0.235 6.0 90 Low Smoke Zero Halogen 706LSZHIOCBX Distribution 6 OFNR (Riser) 0.240 6.1 90 Low Smoke Zero Halogen 708LSZHIOCBX Distribution 8 OFNR (Riser) 0.280 7.1 125 Low Smoke Zero Halogen 712LSZHIOCBX Distribution 12 OFNR (Riser) 0.325 8.3 170 Low Smoke Zero Halogen 718LSZHIOCBX Distribution 18 OFNR (Riser) 0.325 8.3 170 Low Smoke Zero Halogen 724LSZHIOCBX Distribution 24 OFNR (Riser) 0.370 9.4 215 Low Smoke Zero Halogen 704LSZHIOBKX Breakout 4 OFNR (Riser) 0.365 9.3 200 Low Smoke Zero Halogen 706LSZHIOBKX Breakout 6 OFNR (Riser) 0.450 11.4 310 Low Smoke Zero Halogen 708LSZHIOBKX Breakout 8 OFNR (Riser) 0.500 12.7 380 Low Smoke Zero Halogen 712LSZHIOBKX Breakout 12 OFNR (Riser) 0.665 16.9 680 Low Smoke Zero Halogen 718LSZHIOBKX Breakout 18 OFNR (Riser) 0.640 16.3 600 Low Smoke Zero Halogen 724LSZHIOBKX Breakout 24 OFNR (Riser) 0.720 18.3 730 Low Smoke Zero Halogen 704LSZHARBKX Armored Breakout 4 OFCR (Riser) 0.650 16.5 825 Low Smoke Zero Halogen 706LSZHARBKX Armored Breakout 6 OFCR (Riser) 0.675 17.2 935 Low Smoke Zero Halogen 708LSZHARBKX Armored Breakout 8 OFCR (Riser) 0.785 19.9 1170 Low Smoke Zero Halogen 712LSZHARBKX Armored Breakout 12 OFCR (Riser) 0.850 21.6 1440 Low Smoke Zero Halogen 718LSZHARBKX Armored Breakout 18 OFCR (Riser) 0.850 21.6 1355 Low Smoke Zero Halogen 724LSZHARBKX Armored Breakout 24 OFCR (Riser) 0.990 25.2 1800 Low Smoke Zero Halogen
Indoor/Outdoor, Low Smoke Zero Halogen Cable
Effective date: 4/2000 Rev 000 (File: 302-IN-ZC-XXX-1.6mm) Not a controlled document; subject to change without notice Check with a factory representative before placing order KEVLAR is a registered trademark of the DuPont Co
900 µm Tight Buffered Fiber KEVLAR® Reinforcement
Central Member Rip Cord Low Smoke, Zero Halogen Outer Jacket (UL) Listed OFNR Binder (Above 12 Fiber)
Breakout Cable, 12-Fiber
Water-Swellable Core Wrap Central Strength Member
Rip Cord 2.4 mm Sub-unit KEVLAR® Strength Member
Outer Jacket (Low Smoke, Zero Halogen/OFNR)
Armored Breakout Cable, 12-Fiber
Water-Swellable Core Wrap Central Strength Member
Plastic Coated Corrugated Steel Wrap
Rip Cords
Inner Jacket (Low Smoke, Zero Halogen/OFCR)
Outer Jacket (Low Smoke, Zero Halogen/OFCR) 2.4 mm Sub-unit KEVLAR® Strength Member
TECHNICALDATA
X = Fiber type, substitute this symbol in part number for desired fiber type as follows:
10 = Single-mode; 50 = 50/125 G.I Fiber; 62 = 62.5/125 G.I FDDI Grade Fiber; 62G = 62.5/125 G.I Gigabit Grade Fiber; LEAF = Corning LEAF™ Fiber.
Multimode riser and plenum cables are available in orange Single-mode riser and plenum cables are available in yellow.
† NR = Not Rated
C A B L I N G S Y S T E M S