Tài liệu EIA-530 Digital Patching Control Platform pptx

Control PlatformADC’s PatchMate EIA-530 digital patching modules monitor, access, test, and reconfigure multi-conductor digital interfaces.. Standard modules contain three front-panel ja

Control Platform

ADC’s PatchMate EIA-530 digital patching modules monitor, access, test, and reconfigure multi-conductor digital interfaces Failed circuits can be restored and communication paths rerouted— independently and immediately The platform enables higher data rates, superior electrical performance, and quality, reliable service.

Standard modules contain three front-panel jacks for easy access to the circuit and two rear connectors for easy integration to the data network A patch cord inserts into the monitor jack to provide nonintrusive monitoring or into appropriate connection points for replacement of faulty equipment Circuits can be restored with minimum time and effort by splitting and testing them toward either computer or line equipment.

9/02 • 528

The PatchMate digital control platform provides a convenient, organized, and secure method of digital communication line monitoring and reconfiguration Field proven, high quality, and flexible, its unique fixed plant adapters and synchronized timing features simplify the encryption process and ensure network integrity By offering nonintrusive access, Patchmate helps providers deliver reliable transmission and reduce operating costs.

Features

Built-in circuit troubleshooting

• Quickly isolate circuit problems

• Restore critical circuit paths

• Monitor basic network health and activity without additional instruments or service interruptions

• Patches 25 leads

• DC data rates to 5 Mbps (LED modules) and 20 Mbps (non-LED modules)

Robust, reliable design

• Lifetime warranty on patch mechanisms

• No sliding, hinged, or rotating mechanical parts

• Bifurcated gold contacts prevent wear, oxidation, and breakdown

• Recessed contacts on modules and patch cords prevent breakage and contamination

• Reverse patch jack keying

Modular configuration

• Wide array of interface options supports any network environment

• Provides greater flexibility for a variety of applications

• Add or remove modules on a single line basis

• Balanced or unbalanced operation

0 -10 -20 -30 -40 -50 -60 -70 -80

0.1 0.512 1 1.544 2.048 5 10 12.93 20 25 35 44.74 50 75 100

D

E

C

I

B

L

E

S

(dB)

MEGAHERTZ

EIA-530

UPP

EIA-422 EIA-232

9/02 • 528

EIA-530 Modules Specifications

PHYSICAL

Dimensions (HxWxD): 5.25” x 0.95” x 5.5” (13.3 x 2.41 x 13.97cm)

Weight: Approximately 8.0 oz (224 g)

Color: Grey (unless noted)

EIA-530 Assemblies Specifications

PHYSICAL

Dimensions (HxWxD): 5.25” x 19.0” x 9.0” (13.3 x 48.26 x 22.9 cm)

Weight: Approximately 13.0 lbs (4.9 kg)

Connections: Rear/top (DTE) DB25 receptacle connector

Rear/bottom (DCE) DB25 plug connector

POWER 8 Vac power at 47-60 Hz (for PMS-614001 and PMS-614007 only)

Description

Assemblies

Patching with LEDs and test module PMS-614001

- 16 LED PMM-614001 patch modules

- one non-LED PMM-636003 test module

- one blank module

- Power supply DMPS-5A required (order separately)

Patching with LEDs PMS-614007

- 16 LED PMM-614001 patch modules

- Two blank modules

- Power supply DMPS-5A required (order separately)

Patching without LEDs and with test module PMS-616005

- One non-LED PMM-636003 test module

- One blank module

- No power supply required

Patching without LEDs PMS-616004

- 2 blank modules

- No power supply required

Catalog Number

O r d e r i n g I n f o r m a t i o n

Web Site: www.adc.com

From North America, Call Toll Free: 1-800-366-3891 • Outside of North America: +1-952-938-8080 Fax: +1-952-946-3237

Description

Modules

– Rear/top (DTE) receptacle and rear/bottom (DCE) plug

– Use with chassis PMCH-1

Patch module without LEDs

Breakout Module with LEDs

– External power supply DMPS-11 or DMPS-11E (order separately)

is required when used with unpowered chassis PMCH-2

Breakout Module without LEDs

– No power supply required

Test Modules without LEDs

PMM-636002 (grey)

Chassis

Mounts up to 18 modules

For modules requiring power PMCH-1

– Requires power supply DMPS-5A (order separately)

– No power supply required

– LED breakout module PMPB-530-2 requires the use of power

supply DMPS-11 or DMPS-11E (order separately) when used

with the PMCH-2

Patch Cords

Balanced, Key Type A; plugs and cord are grey PMP-6XX007

Power Supplies

For EIA-530 LED assemblies and/or powered chassis PMCH-1 DMPS-5A

– Transfer of 110V-120V/60 Hz power

For breakout module PMBP-530-2 (select one)

Catalog Number

O r d e r i n g I n f o r m a t i o n