1. Trang chủ
  2. » Công Nghệ Thông Tin

Tài liệu SONEPLEX STREAKER MODULE pdf

2 335 0
Tài liệu đã được kiểm tra trùng lặp

Đang tải... (xem toàn văn)

THÔNG TIN TÀI LIỆU

Thông tin cơ bản

Tiêu đề Soneplex Streaker Module
Thể loại Datasheet
Thành phố Minneapolis
Định dạng
Số trang 2
Dung lượng 39,4 KB

Các công cụ chuyển đổi và chỉnh sửa cho tài liệu này

Nội dung

The SoneplexStreaker STK module is an optional,low-cost maintenance module used to verify local wiring in a central office environment from the main distribution frame MDF to a Soneplex

Trang 1

The SoneplexStreaker (STK) module is an optional,

low-cost maintenance module used to verify local

wiring in a central office environment from the main

distribution frame (MDF) to a Soneplex Broadband

or Loop Extender System or from the Soneplex Loop

Extender System to a DSX panel

ADC’s Soneplex system is the lowest total cost

solution for carriers to grow their T1 business

services Focused on providing flexible, end-to-end

solutions, the Soneplex system saves carriers money

on T1-based services over fiber or copper, using

HDSL, ADSL, traditional T1 repeater or Optical DS2

technology, in a single platform From operations,

maintenance, provisioning and high-speed backbone

connections to central office space and cabling, the

Soneplex system is designed to take costs out of

today’s T1 delivery approach, adding profit to your

bottom line

FEATURES

• Verifies continuity of the tip and ring in DS1 loops between MDF and

chassis or between chassis and DSX panel

• Front panel controls and LED indicators

• Front panel test jacks for intrusive DS1 testing and power supply

measurement

The Soneplex System from ADC The T1/E1 Service Delivery Experts

Trang 2

431 11/97 Revision © 1997 ADC Telecommunications, Inc All Rights Reserved An Equal Opportunity Employer

Specifications published here are current as of the date of publication of this document Because we are continuously improving our products, ADC reserves the right to change specifications without prior notice At any time, you may verify product specifications by contacting our headquarters office in Minneapolis ADC Telecommunications, Inc views its patent portfolio as an important corporate asset and vigorously enforces its patents Products or features contained herein may be covered by one or more U.S or foreign patents.

ADC Telecommunications, Inc.

P.O Box 1101

Minneapolis, Minnesota 55440-1101

FAX: (612) 946-3292

From North America, Call Toll Free: 1-800-366-3891, Ext 3223

Outside of North America: 612-938-8080

Home Page Address: http://www.adc.com

International Sales Offices: Belgium 32-2-712-6500 • United Kingdom 44-734-441955

• Montreal, Quebec (514) 677-9166 • Vancouver, BC (604) 270-1675 • Toronto, Ont.

(905) 629-3104 • Ottawa, Ont (613) 723-2171 • Singapore 65-225-8228 •Venezuela

58-2-286-1444 • Mexico City, Mexico 525-658-4519 • Buenos Aires, Argentina (541)

449-2669 • Sao Paulo, Brasil 55-11-3040-0666 • Sydney, Australia 61-2-9975-1499 •

Melbourne, Australia 61-3-9585-3931 • Beijing, China 86-10-6500-7001 • Dusseldorf,

Germany 49-211-530-6550 • Seoul, Korea 82-2-333-8989

in both the Soneplex Broadband chassis and the Soneplex Loop Extender chassis When used in the Soneplex Broadband chassis, however, the DSX LED and test jacks are not used, since the STK interfaces with the central office through the DS3 MUX in the chassis The STK can be self powered, operating from its own 6-volt battery supply or draw from the power supplied to the chassis

To use the module, the installer/maintenance engineer plugs the module into the chassis slot wired with the DS1 loop When the tip or ring at the far end of the loop is grounded, the respective LED on the STK front panel should light indicating circuit continuity If both the tip and ring LEDs light when either lead is grounded, there is low impact impedance between the leads, or the tip and ring are shorted together Addition-ally, the STK provides test jacks on the front panel for intrusive testing of the DS1 line connections and for measuring the -48 VDC supplied to the chassis slot

Dimensions (HxWxD):

Weight:

Operating Temperature:

Operating Humidity:

Input Power:

Voltage Range:

Internal Batteries:

Line and DSX Jack Access:

Regulatory Compliance:

4.5" x 1.0" x 9.9" (11.43 x 2.54 x 25.15 cm) 0.43 lb (.18 kg)

-40 ° F to 122 ° F (-40 ° C to 50 ° C) 5% to 95%, non-condensing -42.5 to -56.5 VDC

-48 VDC nominal

6 VDC; four 1.5 volt AAA batteries mounted on PCB Bantam jacks

UL94V-2 Flammability Rating

Specifications

STK

GREEN RED

RING TIP

CHASSIS BACKPLANE

TWISTED PAIR WIRE

MDF

BANTAM JACK

Soneplex Streaker Module

SPX-STK0A1

Ordering

Information

Ngày đăng: 10/12/2013, 16:15

TỪ KHÓA LIÊN QUAN

w