03 AB controllogix interface driver module configuration Training PLC Allen Bradley

PLC CONFIGURATION WITH PROGRAMMING SOFTWARE Communication Software Programming Software... COMMUNICATION STATUSIf there is communication status error with a devices, that devices appears

DAY 1

SESSION 3

AB CONTROLLOGIX INTERFACE DRIVER &

COMMUNICATION BETWEEN PLCS

using a processor.

COMMUNICATION BETWEEN PLC

WITH COMPUTER

232

downloading at empty EEPROM in the PLC’s processor.

PLC CONFIGURATION WITH

PROGRAMMING SOFTWARE

Communication Software

Programming Software

File downloading from PC to PLC :

- Ladder Logic

- Data File Structure

- Data Table Values

Description about I/O module name, every remark and others didn’t

downloaded to the PLC

DF1

Connects maximum of 64 devices per link (suggested 15 or less

node per link)

• PLC-5 and SLC 5/04

• Computer

• RS-232-C/RS-422 Programmable Devices

DH PLUS

ETHERNET

PLC CONFIGURATION

PLC configuration interfaces PLC’s program with the hardware.

Consist of:

• Processor type selection

• I/O modules selection

• Communication media selection

• Power supply selection

+ Slot location

RS LINX

RSLinx provides a large communication to the application that consist of:

• Rockwell Software Products

• Allen-Bradley PLC Hardware Products

• MMI / HMI and Hardware Products

• DDE and OPC Compliant Products

Starting RSLinx :

Start  Programs  Rockwell Software  RSLinx  RSLinx

Click

RSLINX BROSWER

This window is RSLinx Network browser interface, which allows to view all of active network

EXPAND AND COLLAPSE NETWORK

COMMUNICATION STATUS

If there is communication status error with a devices, that devices appears with an

X trough it.

RS-232 DRIVER CONFIGURATION

DIALOG BOX : CONFIGURE RS-232

DF1 DEVICES (2)

Select Logix 5550 / CompactLogix

DIALOG BOX : CONFIGURE RS-232

DF1 DEVICES (2)

Click on Auto-Configure

button

MONITORING RS232 DRIVER

The AB_DF1 driver now appears in the list of configured Drivers, and is listed as “

Running in the Status column

MONITORING RS232 DRIVER (2)

ADDING ETHERNET DRIVER: STEP 1

ETHERNET DRIVER : STEP 2

ETHERNET DRIVER : STEP 3

ETHERNET DRIVER : STEP 4

ETHERNET DRIVER : STEP 5

ETHERNET DRIVER : STEP 6

The Remote Devices via Linx or 1756-ENET Gateway dialog

appears

The IP address is assigned to the

pre-1756-ENET module

ETHERNET DRIVER : STEP 7

The TCP-1 Ethernet driver now appears in the list

of Configured Drivers, and is listed “Running” in the Status column

ETHERNET DRIVER : STEP 8

ETHERNET DRIVER : STEP 9

The TCP-1 Ethernet driver

MODULE CONFIGURATION

CONTROLLER FILE: STEP 1

CONTROLLER FILE: STEP 2

CONTROLLER FILE: STEP 3

CONTROLLER FILE: STEP 4

CONTROLLER FILE: STEP 5

CONTROLLER FILE: STEP 6

CONTROLLER FILE: STEP 7

CONTROLLER FILE: STEP 8

CONTROLLER FILE: STEP 9

CONTROLLER ORGANIZER : 1

Controller organizer is a graphical organizer

There is five main folder in this tree

The Trends folder contains any trends are running in this

controller file Up to 8 data element at a time

ADD DISCRETE OUTPUT MODULE:

STEP 1

DO: STEP 2

DO: STEP 3

DO: STEP 4

DO: STEP 5

DO: STEP 6

New module appears

DO: STEP 6

Click on controller tags icon

DO: STEP 7

The Data Monitor appears, with 3 entries in the Tag name column:

• Local:0:C

DO: STEP 7

a module in the same chassis as the controller.

module.

indicate Configuration, Input or Output data

DO: STEP 8

ADD DISCRETE INPUT MODULE :

STEP 1

DI: STEP 2

DI: STEP 3

DI: STEP 4

DI: STEP 5

The new module then appears

SESSION 4